Dissertation > Excellent graduate degree dissertation topics show

Study and Application on the Key Techniques of the Qantitative Metallographical Automatic Analysis System

Author: LinJinZuo
Tutor: WangGuiTang
School: Guangdong University of Technology
Course: Materials processing
Keywords: metallographic analysis crystal degree impurity eutectic carbide automatic rating
CLC: TG115.21
Type: Master's thesis
Year: 2007
Downloads: 192
Quote: 1
Read: Download Dissertation

Abstract


Metal material occupies dominant position continuously in the material industry. Among the various methods of metal material analysis, metallographic analysis, because of its being direct-viewing, has always been a feasible and effective way of research and testing, which is widely applied in the field of Material Science and Engineering. Metallographic analysis is an important way for research of metal material. It has been depending on inspecting the image under microscope since long ago. It has subjectivity as it relies on the analyst’s knowledge and experience.With the development of computer technology, many items of metallographic analysis can be accomplished by computer. Uses of computer technology will greatly decrease subjectivity, as well as the requirements for the technical staff’s experience. Therefore, development of metallographic automation is the main tendency of metallographic analysis. Currently only a small fraction of metallographic testing can be done by computer automatically. The main research direction of this thesis is to further the improvement of automation and intelligence in metallographic analysis with computer application.This thesis discusses the primary principle and methods of testing in metallographic analysis, including analysis and rating of crystal degree, nonmetal inclusion, eutectic carbide, and automatic testing of depth of penetration layer, after introducing some basic concepts and principles.The method of automatic grading in grain size measurement is put forward based on the definition of grain size in the Chinese Standards. The method of using image processing techniques of dimension calibration, image binarization, noise elimination, intergranular extraction to count the crystals and then rank them is introduced. The difficulty of automatic crystal counting due to one identical intergranular shared by two adjacent grains is solved through turning one intergranular into two single-image-element intergranulars. The second-phases and impurities are removed through limiting the length of Freeman chain during crystals counting.On the basis of statistics, the transformation realization from qualitative description to quantitative description of inclusion rating in Chinese standard is put forward. Automatic classification and rating is completed with computer rating model of inclusion after the inclusion rating parameters are extracted with digital image processing.The method of establishing mathematics model of eutectic carbide rating with fuzzy mathematics is also provided.Wavelet shapes of carburize and nitriding is researched, and automatic testing of depth of penetration layer is resolved, based on the theory of wavelet multi-resolution.Finally, the structure and functional module of the software OpenPark is introduced, which has reference for the development of related software of image processing.

Related Dissertations

  1. Technology Research on Preparation of Nanometer ZnO by Hot Galvanizing Dross,TB383.1
  2. Research on Preparation of Clopidogrel Related Compound A and C and Clopidogrel Crystal Form and Diastereoisomeric Salt,TQ460.6
  3. A new process impurity distribution fitting and model parameter extraction,TN402
  4. Economic Optimize Control and Analysis of Iron Concentrate Upgrading and Impurity Reducing,F426.1
  5. The Influence and Mechanism of Residual Stress of High-temperature Welding for 16MnR Welding,TG404
  6. Study of Extraction and Purification Technology on Steviol Glycosides from Stevia Rebaudiana Bertoni,TQ464.3
  7. The Study on Preparing the Porous Mullite with Al Powder and Fly Ash,TQ175.712.1
  8. Effect of Electromagnetic Field on the Fe-Si Impurity Phases of Solidified Commercially Pure Aluminum,TG111.4
  9. Strategies of Impurity Control in Active Pharmaceutical Ingredients for Generic Drugs,TQ460.1
  10. Study on the Main Impurities in the Technical S-Triazine Herbicides,TQ457.24
  11. Influences of Impurities on Solubility Parameter of Chlorinated Polypropylene,TQ325.14
  12. Additive and Impurity Effects During Plating in Tin Methanesulfonate Electrolytes,TQ153.13
  13. Research on Purification Treatment of Molten Al and Al-Si Alloys and Its Mechanism,TG146.21
  14. External Electric Field Effect on Electronic and Optical Properties in InGaN/GaN Low Dimensional Systems,O471.1
  15. Batch Cooling Crystallization of Fipronil,TQ453.2
  16. Effects of Side Radicals and Nonlinear Electron-lattice Interactions on Polarons,O631.1
  17. Magnetic field quantum tube negatively charged donor impurity system properties of,O471
  18. Research on Methods for Chemical Analysis of Cobalt Oxalate,O657.31
  19. Crude copper sulfate purification the impurity and electrowinning prepared copper powder,TF123.23
  20. Study on the Organic Impurities of Ceftriaxone Sodium,R927
  21. The Realization of Photonic Crystals Impurity Band and a Large Separating Angle Beam Splitter,TN253

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallurgy ( Physical Metallurgy ) > Analytical tests of the metal (Metal Testing and Materials ) > Physical test method > Metallographic analysis ( microscopic analysis )
© 2012 www.DissertationTopic.Net  Mobile