Dissertation > Excellent graduate degree dissertation topics show

Silicon pressure sensor design of analog-digital conversion circuit

Author: YangZiJiang
Tutor: WenDianZhong
School: Heilongjiang University
Course: Microelectronics and Solid State Electronics
Keywords: pressure sensor ADC MEMS Wheatstone bridge
CLC: TP212.1
Type: Master's thesis
Year: 2011
Downloads: 77
Quote: 0
Read: Download Dissertation

Abstract


Pressure sensor has a key role in many fields.According to some literatures concerned, there are many kinds of pressure sensors, most of them are made from silicon wafer.In this paper, the pressure sensor is based on MEMS technology ,making four polysilicon resistances on the monocrystalline silicon.They make up of Wheatstone bridge,so we have the polysilicon pressure sensor Considering piezoresistance effect of semiconductor, when the pressure is applied on the surface of polysilicon pressure sensor,two polysilicon resistances turn to bigger, the other two resistances become smaller,so the Wheatstone bridge is out of balance, there is a output of voltage,finally we can convert the pressure signals to the voltage signals.This paper describes the structure and design of pressure sensor, work theory of pressure sensor, simulation and fabrication process of ADC circuit.The I-V characteristic, static properties and the temperature characteristic are tested.Then we have a simulation of testing signal circuit, ADC, control display circuit and circuit of power by software. In some degree the pressure sensor in this paper overcome disadvantage which poly silicon pressure sensors and enhance the stability of the sensor.ADC circuit reaches demand of design by experiment.

Related Dissertations

  1. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  2. Design and implementation of the multi-channel pressure sensor auto-calibration system,TP212
  3. Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38
  4. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  5. A High-Performance Audio ∑△ ADC in 65nm CMOS Process,TN792
  6. Wafer Level Vacuum Packaging of MEMS Device by Solder Sealing,TN305
  7. SHS reaction bonding process research and application,TN405
  8. MEMS-based microfluidic PCR technology system development,TN492
  9. Six -axis micro- accelerometer electrostatic levitation design and system -level simulation,TH824.4
  10. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33
  11. One kind of resistive touch screen controller chip design,TN402
  12. 14-bit 100 MB samples / sec pipelined ADC Research and Design,TN792
  13. The Key Techniques of Practical Satellite Navigation Anti-jam Receivers,TN967.1
  14. Diffusion Weighted Imaging and Pathology Study of Subcutaneous Hepatocelluar Carcinoma Bearing Nude Mice Model,R735.7
  15. The Diagnostic Value of Diffusion-weighted Imaging Combined with Contrast-enhancement in Uterus Cervical Carcinoma,R737.33
  16. Early Diagnosis and Quantitative Evaluation of DWI in the Lesions After Radiofrequency Ablation of Hepatic Carcinoma,R735.7
  17. Research and implementation of low supply voltage , high-performance pipelined ADC - oriented,TN792
  18. 10-bit 50-MS / s low-power pipelined ADC design,TN792
  19. Audio low-voltage continuous-time Sigma-Delta ADC Research and Implementation,TN761
  20. Clamp Rogowski Coil Electronic Current Transformer Based on Printed Circuit Board,TM452

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Physical sensors
© 2012 www.DissertationTopic.Net  Mobile