Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Influencing Factors to Deformation and Strength for Municipal Solid Waste

Author: JuPing
Tutor: KongXianJing;ZouDeGao
School: Dalian University of Technology
Course: Disaster Prevention and Reduction Engineering and Protective Engineering
Keywords: MSW Particle size Void ratio Degradation Bilinear strain hardening model
CLC: X705
Type: Master's thesis
Year: 2008
Downloads: 126
Quote: 1
Read: Download Dissertation

Abstract


With the rapid social and economic development, how to handle the municipal solid waste effectively has already become the focus problem to which the society and people pay close attention nowadays. Land filling is one of the primary methods for municipal solid waste disposal. The key technology of landfill is to ensure the hazards of MSW to be long-time closed in landfill to avoid surrounding environment pollution. Therefore, to design a stable and security landfill, it is important to know the mechanical properties of MSW and propose the method of determination of the mechanical properties of MSW, establish the constitutive model of China MSW. It is convenient to provide an important basis for the design &construction of landfill.The mechanical properties of MSW are key basis for stability analysis of landfill. Previous researchers study the MSW by two main ways, one is laboratory test, and the other is field test. The laboratory test includes direct shear test, compression without lateral, different size Triaxial Compression Test etc. The field test includes cone penetration test, standard penetration test & vane shear test. All above those, the most common method is Triaxial Compression Test.MSW has complicated constituents ,high heterogeneity, and contains a lot of organic matters. The range of particle size is large; the void ratio is changed with the depth and the duration of the landfill. The degradation changes with time and it can effect the particle size and void ratio of MSW. Particle size、void ratio and degradation are the main affecting parameters of the MSW.The principal tasks are as follows.(1) CD shear tests were conducted using medium-scale triaxial apparatus on MSW samples of similar gradation while deferent particle size, in order to research the size effect of MSW in Triaxial Compression Test.(2) MSW samples are simulated the compositions of MSW from Hangzhou Tianziling landfill in deferent void ratio. CD shear tests were conducted using medium-scale triaxial apparatus on these MSW samples to study the influence of void ratio to MSW.(3) Because the degradation of MSW is to long, it is difficult to obtain massive deep degradation MSW samples. Simulated materials were sampled and tested according to the characteristics of real old MSW and the results of triaxial tests. Research showed that it is feasible using simulated materials to investigate the characteristics of old MSW, Based on the simulated materials, CD shear tests were conducted by deferent degradation MSW samples. Attempt to research the influence of the degradation to MSW.(4) The Test data processing method is the bilinear strain hardening model, to further verification applicability and rationality of the bilinear strain hardening model.(5) The experiment study results could be used in solid liquid gas coupled model, and it lays a theoretical foundation for the numerical method of landfill stress and deformation analysis.

Related Dissertations

  1. Study on the Degradation of Unsaturated Polyester Resin and Fiber Reinforced Polymer in Hot Compressed Water,TQ320.1
  2. Recovery Whey Soy Protein by Microfiltration and Development of Whey Powder,TQ936.2
  3. Process Optimization and Degradation Kinetics for Microwave Vacuum Drying of Different Traditional Chinese Medicine Extract,TQ461
  4. Study on the Preparation of the Low Molecular Weight Fuciodan from Sargassum Henslowianum (C.Agardh) and Anti-tumor Activity,TS254.9
  5. Study on Activated Carbon Supported Cerium Catalytic Ozone Oxidation of Chloramphenicol,X703
  6. The Study of Preparation and Photocatalytic Activity of TiO2 by Electrospinning,O614.411
  7. Process and Mechanism of Eucalyptus Pulp Bleaching Catalysed by Cu2+/Co2+,TS745
  8. The Research on Sulfate Leaching Properties of Cation-exchange Resin Used in Power Plants,TQ425.23
  9. Study of Nitrobenzene Wastewater’s Treatment by Combination of Immobile Phanerochaete Chrysosporium and Activated Sludge,X703
  10. Study on the Breeding of High Efficient Detoxification Strains and Suggestion Parameters of Solid Fermentation on Cottonseed Meal,S816.6
  11. Detection of Exogenous Recombinan DNA of Transgenic Rice and Its Rice Product,S511
  12. Study on Detection of Transgenic Ingredients in Genetically Modified Cottonseed Meal and Its Degradation during Feed Processing,S816
  13. Isolation and Characterization of Carbendazim-Degrading Strains, Cloning and Expression of the mheI Gene,X172
  14. Isolation, Identification and Degradation Characteristics of a Benazolin-Ethyl Degrading Bacteria and Degradation Pathway,X172
  15. Isolation and Identification of Pyrene-Degrading Strain SE12 and Its Degrading Effect,X172
  16. The Interaction of Fluroxypyr with the Green Alga Chlamydonomas Reinhardtii,S482.4
  17. Isolation, Identification and Degrading Characteristic of a Cyhalofop-Butyl-Degrading Bacteria, and Cloning, Expression of a Cyhalofop-Butyl-Hydrolyzing Gene chbH,X172
  18. A Study on Environmental Behaviors of 2,4-D Butylate,TQ450.2
  19. Study on Oxidation Treatment of Phenol Contaminted Soil Using Potassium Ferrate,X53
  20. Study on Bacterial and Fungi Community Diversity of Different Particle Size in Paddy Soils under Long-Term Fertilization Treatments in the Tai Lake Region, China,S154.3
  21. Study on the Three-stage Inoculant and Lignocellulose Gegradation in Dairy Manure Composting,S141.4

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Solid waste disposal and utilization
© 2012 www.DissertationTopic.Net  Mobile