Dissertation > Excellent graduate degree dissertation topics show

Coal Mine High-low Concentration Methane Saftey Supervision System

Author: LiuCheng
Tutor: JiaLei
School: Shandong University
Course: Control Science and Engineering
Keywords: high-low concentration methane transducer coal mine monitoring substation ARM uC/OS-Ⅱ
CLC: TP277
Type: Master's thesis
Year: 2011
Downloads: 160
Quote: 1
Read: Download Dissertation

Abstract


Coal is the primary energy source in our country. It occupies an important position in the national economy. There are many security problems in the process of coal production, the coal mine accidents occurred frequently, and the coal mine accidents that caused by methane gas have already been above 70%. Therefore, it is very important to design a coal mine methane safety supervision systym with high-reliability and high-stability for the coal mine safety production.According to the requirements of users and the criterion of safety manufacture, and using computer technology, single-chip technology and communication technology, an overall design scheme of coal mine methane safety supervision system was brought forward. And a coal mine high-low concentration methane transducer and sub-station and designed and implemented.In this paper, the design of coal mine high-low concentration methane transducer and sub-station measure up to safety-production standards AQ 6206-2006 Coal Mine High-Low concentration methane transducer, General technical requirements of coal mine safety supervision.The high-low concentration methane transducer can realize real-time detection, automatic zero adjustment and nonlinear compensation.The methane transducer adopts two kinds of carrier-catalysis elements to detect the high-low concentration methane.In the hardware design, AT89C51RC2 microcontroller is chosen as the core processor, and the power supply circuit, signal amplification circuit, A/D conversion circuit, heating-sampling circuit, infrared reveivingl circuit, communication circuit, signal output circuit are designed.In the design of software, Using a modular design method, and zero automatic compensation algorithms, the methane transducer can adjust the zero point to improve the accuracy. After the specified test, the high-low concentration methane transducer has the following advantages:low power consumption, maintainability, strong ability of data processing, high detecting precision, anti-interference ability. It realizes the digital detection of methane.The coal mine sub-station design is based on ARM, uses the real-time kernel uC/OS-Ⅱas the software platform and uses the TCP/IP protocol to realize the communication between the central monitor and sub-station.In the sub-station hardware design, the ARM chip LPC2210 of NXP Corporation, which has 8-channel 10-bits A/D converter,76 I/O interface and CAN bus controller, is chosen as the core processor. The sub-station can realize acquisition of frequency signal, current signal and CAN bus signal. In the software design, the real-time kernel uC/OS-Ⅱis transplanted to LPC2210 chip. The thesis introduces the implementation of embedded software task. Then it has realized some other test and debugged works.

Related Dissertations

  1. The Electric Power Steering System,U463.4
  2. Development of Experimental Robot Control System Based on ARM,TP242.6
  3. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  4. Research on Visual Servo System of Mechanical ARM,TP242.6
  5. Research on Software of TFT-LCD Testing Equipment Based on ARM,TN873.93
  6. Signal Acquisition and Processing Platform Design and Implementation of Trawl Sonar System,S951.2
  7. Study of An Embedded Chinese Medical Therapeutic Apparatus,R197.39
  8. Development of Intelligent Interpretation System Based on ARM9,TP391.44
  9. Borehole imaging device based on embedded systems research,P634.3
  10. Remote areas, distribution transformer monitoring system design theft,TM421
  11. Study of the Mechanical Strcture of a De-Icing Robot for 220kV Transmission Lines,TP242
  12. Based on the embedded Web technology Research and Implementation of Dynamic Strain Gauge,TP368.1
  13. Researching and Developing CEMS Data Acquisition and Handling System Based on AT91SAM9263,TP274.2
  14. Excitation System Design and Research of High-frequency Fatigue Machine,TH871.3
  15. Design and Implementation of Embedded Multi-parameter Intelligent Evironment Monitoring Systems,TP274
  16. Research of Ultrasonic Testing System Based on ARM Controller,TP274.53
  17. Research of Infrared Radiation Temperature Measure System Based on μC/OS-Ⅱ,TN215
  18. The Design and Implementation of Vehicle Positioning and Tracking System Based on ARM,TP368.12
  19. Design and implementation of vehicle transport of dangerous goods monitoring terminal based uC/OS- Ⅱ,TP316.84
  20. Development of Embedded Image Processing Platform Based-on ARM Chip,TP391.41
  21. A Study of PAPR Reducing in the OFDM Underwater Acoustic Communication Systems,TN919.3

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Monitoring, alarm,fault diagnosis system
© 2012 www.DissertationTopic.Net  Mobile