Dissertation > Excellent graduate degree dissertation topics show

Study on Flow Characteristics of the Pressurized Oxygen-enriched Fluidized Bed

Author: WangYanYan
Tutor: WangChunBo
School: North China Electric Power University
Course: Thermal Power Engineering
Keywords: pressured fluidized bed minimum fluidization velocity Ergun equation least square fitting
CLC: TQ021
Type: Master's thesis
Year: 2011
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


An experimental study of the influence of pressure on Umf was carried out in a bubbling fluidized bed in the range of operating absolute pressure 0.1MPa~0.6MPa and temperiture 100℃~800℃with quartz and ceramic sand. The results show that: Umf for Geldart B powder and Geldart D powder is found to decrease, but the relative change of it decreases with the rising of pressure. Umf for tiny particles is found to decrease, but the relative change of it decreases with the rising of temperiture, and for large particles Umf is found to increase with the rising of temperiture. However, there is no influence of pressure on Umf for the Geldart A powder. The temperature has very big effect on the particle fluid dynamics characteristics. The flow characteristics under the high temperature and the room temperature are different. Therefore the particle flow characteristics under normal temperature are different with the rule under the environment of high temperature in design and operation of actual industrial fluidized bed device. Based on Ergun equation and bed stress analysis, a new equation between Remf and Ar is developed by least square fitting the experimental data. The discrete degree between predicted Remf and experimental results is in the range of 10%. It is useful for the design and operation of the pressured fluidized bed reactor. All the minimum fluidization velocity empirical formulas have their fitting range, and it will lead to greater error when beyond its experimental conditions. Therefore, the minimal fluidization velocity should be determined by experiment in the design fluidized bed condition to reduce design error.The air quantity of fan sending is found to increase with the rising of pressure. However, the influence of temperature is different with different particle size, which can be explained by different variation rules of density and minimum fluidization velocity with system pressure and temperature.

Related Dissertations

  1. The Method Study of LIDAR Data Filtering,P225.1
  2. Experimental studies of the fluidization characteristics of fine particles of gypsum,TQ021
  3. Image Measuring Technique and Its Application Study,TP391.41
  4. Fluidization Properties in Micro-scale Fluidized Beds with Acoustic Intensification,TQ021
  5. Allocation and Recognition of the Anchor Point in PCB Board,TP391.41
  6. Centrifugal fluid bed drier Characteristics,TQ021
  7. Time-resolved Light Distribution Properties and the Optical Parameters Measurement in Bio-tissue,Q63
  8. Study on the Fluidization Characteristics of the Reactor Used in the Synthesis of Organosilicon Monomer,TQ05
  9. The Surface Matching and Probe Compensation for CMM,TH721
  10. Research on CAD and Numerical Control Machining Programme of Torpedo Shell,TJ630.5
  11. Planetary Wave Examined from Ozone Profile Data of Odin-OSIRIS,P433
  12. Research and Application on Engineering Based on Modern Algorithms,TP301.6
  13. Experiment and Model Study on Pressurized Circulating Fluidized Bed,TQ051
  14. Knowledge Evoluation Algorithm and Its Application in Chemical Dynamic Optimization,TQ021.8
  15. Numerical Simulation and Influence Factors of Heat Transfer Cooler,TQ021.3
  16. Experimental Study on Marangoni Effect on the Gas-Liquid Mass Transfer Process,TQ021.4
  17. Study on Hydrodynamics of Gas-liquid Two-phase Flow in Monolith Multi-channel,TQ021.1
  18. Experimental Research on Marangoni Convection in the Gas-Liquid Mass Transfer with PIV,TQ021.4
  19. A Numerical Study of Longitudinal Vortex Induced Enhancement of Mass Transfer in a Membrane Channel,TQ021.4
  20. Lattice-Boltzmann Simulation on Fluid Dynamics and Mixing in Micro Channels,TQ021.1
  21. Study of the Fluid Dynamical Performances in Pipes System of Pressure Swing Absorption,TQ021.1

CLC: > Industrial Technology > Chemical Industry > General issues > Chemical processes ( physical processes and physical and chemical processes ) > Basic theory
© 2012 www.DissertationTopic.Net  Mobile