Dissertation > Excellent graduate degree dissertation topics show

Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating

Author: LuoZuo
Tutor: ChenXingJuan
School: Harbin Engineering University
Course: Applied Chemistry
Keywords: Polyaniline Epoxy resin Mg-Li alloy Anticorrosion coating Anticorrosion mechanism
CLC: TQ637
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


The polyaniline (PANI) was synthesized by chemical oxidation polymerisation and emulsion polymerisation with ammonium persulfate as the oxidant in this paper. The hydrochloric acid, phosphate acid, sulfosalicylic acid and o-tosylate acid were used as doped acid, respectively. The PANI was characterized by infrared spectrum, X-ray diffraction, scanning electron microscope and conductivity test.The results of infrared spectra showed that the polyaniline was synthesized successfully with different methods and different doped acids, which all had the "benzene quinone "structure. The result of conductivity test showed that the conductivity of polyaniline doped with hydrochloric acid and chemical oxidation polymerisation was highest; The result of SEM showed that different doped polyaniline had different shape; The result of X-ray diffraction indicated that the polyanilines doped with hydrochloric acid in chemical oxidation polymerization and doped with sulfosalicylic acid in emulsion polymerisation have the higher crystallization.The anticorrosion coating was prepared by the polyaniline doped hydrochloric acid in chemical oxidation polymerization, epoxy resin E-44, curing agent T-31, pigment titanium dioxide, talc powder, nano-SiO2 and the solvent. The mixed solvent was toluene and n-butanol (the ratio of mass was 1:1). The best mass ratio of the coating (relative to mass of the epoxy resin) was curing agent 35%, solvent 40%, titanium dioxide 2%, talc powder 5%, nano-SiO2 2%.The anticorrosion coating was prepared by adding 0%~5%PANI on the surface of tinplate and Mg-Li alloy. The anticorrosion properties were investigated by open circuit potential, electrochemical impedance spectroscopy and polarisation curves in 3.5% NaCl solution. It was finded PANI/epoxy resin coating on the surface of tinplate and Mg-Li alloy both had good anti-corrosion properties. The open circuit potential of the coating on the surface of Mg-Li alloy was less than the tinplate about 0.6~1.2V. The results of the polarization curves and electrochemical impedance spectra showed that the coating of adding 4% polyaniline on the surface of tinplate had the best anticorrosion properties, and the coating of adding 2% polyaniline on the surface of Mg-Li alloy had the best anticorrosion properties. The results of electrochemical tests showed that the corrosion potential of polyaniline-containing coating increased, the corrosion current decreased about 2~7 orders of magnitude, and the impedance increased 2-5 times, which proved polyaniline on the surface of Mg-Li alloy and tinplate had good anticorrosion properties.The anticorrosion mechanism of the polyaniline-containing coating on the surface of Mg-Li alloy and tinplate is due to its passivation, shielding and corrosion inhibition.

Related Dissertations

  1. The Preparation of Polyaniline-Metal Complex and the Study on Its Catalytical Property,O634
  2. Preparation and Property Study of Polyaniline/Polyester Composite Conductive Fabric,TS195.6
  3. Study on Carboxyl Side Groups Containing Poly Aromatic Ether Sulfone Ketone and Modification of Epoxy,O631.3
  4. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  5. Study on Organic Silicone Modified Epoxy Resins Performance and Preparation of Adhesive,TQ323.5
  6. Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
  7. SnO 2 / CNTs composite Controllable Preparation and Gas Sensitivity Study,TB383.1
  8. Preparation of polyaniline nanostructures , characterization and biomedical applications,TB383.1
  9. Modification of Thermosetting Resins by High Performance Liquid Crystalline Epoxy Resin,TQ323.5
  10. Synthesis and Characterization of Polyaniline Micro/nano Structure and Its Composites,TB383.1
  11. Electrically Conductive Adhesives Based on Epoxy Resins Modified by Polyimide Powder with Carboxyl Groups,TQ433.437
  12. Preparation of Epoxy Resin Cured with Latent Curing Agent at Moderate Temperature,TQ323.5
  13. Preparation and Property Study of Glass Cloth Reinforced F Class Laminates Based on Halogen-free Retardant Epoxy Resin,TQ323.5
  14. The Preparation of Metallic Fabrics with PD-Free Activation and Research of Its Properties,TS106
  15. Polyaniline and carbonaceous material / Polyaniline Composite Electrochemical Properties of,TB383.1
  16. Study of Composite Drive Shaft for an Automobile,U465.6
  17. Carbon nanotubes doped polyaniline and its application in gas sensors,TB383.1
  18. Composite Supercapacitor Electrode Materials Preparation and Properties,TM53
  19. Investigation of the Stress-Strain Behavior of Hot-compression Mg-Li Alloy,TG146.22
  20. The Preparation and Characterization of Conducting Polymers with Electromagnetic Function,TB383.1

CLC: > Industrial Technology > Chemical Industry > Paint Industry > Special paints
© 2012 www.DissertationTopic.Net  Mobile