Dissertation > Excellent graduate degree dissertation topics show

Analysis the Acoustic Responses of Vehicle Interior Air Noise of Acoustic Source

Author: SangShuaiJun
Tutor: DongDaWei
School: Southwest Jiaotong University
Course: Vehicle Engineering
Keywords: Vehicle interior noise Air noise Acoustic model Acoustic responses Acoustic absorption material
CLC: U270.16
Type: Master's thesis
Year: 2011
Downloads: 52
Quote: 0
Read: Download Dissertation

Abstract


This dissertation using finite element and boundary element method to research the acoustic responses which bring by the vehicle interior air noise.It’s a veiy important direction for the research the vehicle acoustic problems.At present, there are still few studies in this area in Chinese. This thesis mainly study the acoustic response of air noise which generated by the EPS in the vehicle development process. On the one hand, studying the basic law of interior acoustic response under air noise excitation; On the other hand, exploring the impact of absorption material on the interior noise, in order to further enrich the content of researching car interior acoustic response.The main research contents as follow:First established vehicle interior acoustic cavity FEM model,then research the acoustic modal of the vehicle interior acoustic cavum by finite element method. Comparing whit the modal analysis of two vehicle interior acoustic cavum FEM model which have seats and without seats,the results show that every phase of modal frequency of the modal which have seats are all below than the modal which without seats, and the modal shape have been changed.lt show that seats are very important for the vehicle interior acoustic cavity modal,and it should not be ignore when establishing the vehicle interior acoustic cavity model.In foundation of the calculate result of the modal analysis,a modal test of the vehicle interior acoustic cavity was been done.and the result of the test prove that the vehicle interior acoustic cavity FEM model can be trusted.For the abnormal noise cases of a certain type of EPS in practical application,can take noise and vibration testing under all conditions when this type of EPS.Finding that when the engine is not running, noise which generated in fast turning the steering wheel is mainly focused in the low-frequency. Then this low-frequency signal resonances under the modal frequency of interior acoustic field, which makes the interior acoustic field in high acoustic pressure level under all modal frequency.Thus, it effects the comfort of driver and passengers.Then the acoustic responses of the vehicle interior acoustic cavity model which has seat are analyzed with noise excitation of invariableness acoustic source and measured EPS separately, and the results in two working states are got. Results show that the response peak frequency is closely connected to the modal frequency of the vehicle interior acoustic cavity. The sound pressure levels of observation points at peak frequency are related to the mode shapes of the vehicle interior acoustic cavity.It is match whit the practice instance that the noise of EPS arouseing some high sound pressure levels noise at some peak frequency will make the passengers fell uncomfortable.In foundation of the acoustics response of the vehicle interior acoustic cavum, this article analysis the influences of the acoustic absorber in places of ceiling, front boarding, floor to the vehicle interior acoustic field. The result indicated that the same material in different positions has different acoustic absorption performance, and even the same material in the same position creates big differences of acoustic absorption performance in different frequency. The simulation result has the important instruction and the reference significance for the control the vehicle internal noise.

Related Dissertations

  1. The LVCSR system based on adaptive methods of semi-supervised learning,TN912.34
  2. Experimental Research and Analysis of Acoustic Property for Aluminum Foam Composite Structure,TB383.4
  3. Study on the Sound Insulation Properties of Light Gauge Steel-Framed Composite Wall,TU552
  4. Research on Properties of Vibration Reduction and Noise Absorption of Porous Concrete Materials,U414
  5. Aluminum foam muffler performance analysis and experimental research,TB535.2
  6. An Automatic Labeling System for Broadcast News,TN931
  7. Based pronunciation dictionary adaptive national language accent Mandarin speech recognition,TN912.34
  8. Dolby LossyMLP Technology and Application,TN912.3
  9. The Investigation of Experiment and Numerical Simulation on Flow Characteristic in Gas-Fluidized Bed,TQ021.1
  10. Study on Subjective Evaluation and Analysis Methods of Vehicle Sound Quality,U467.493
  11. Discriminative training and discriminative adaptive acoustic models in automatic speech recognition Optimization,TN912.34
  12. Acoustic Modeling for Continuous Speech Recognition,TN912.3
  13. Study on Active Noise Control Inside Automotive Cabin,U467.493
  14. Statistical Energy Analysis on Interior Noise Control of Passenger Car,U461
  15. Research on Vehicle Interior Adaptive Active Noise Control System Based on Engine Rotation Speed,U464
  16. Study on Vehicle Interior Noise Reduction,TB535
  17. Prediction and Analysis on Passenger Car’s Interior Noise Using Statistical Energy Analysis Method,U462
  18. The Basic Study on Water Acoustic Absorption Polymer Materials,TB564
  19. Research on Audible Noise Predicting System of Hvdc Transmission,TB51
  20. The Study of MOEMS Acoustic Sensing Technology and Low Frequency Acoustic Transmission Properties,TP212

CLC: > Transportation > Rail transport > Vehicle Engineering > General issues > Vehicle theory and experiment > Vehicle noise and to prevent
© 2012 www.DissertationTopic.Net  Mobile