Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Straw Cutting Process and Wear Resistance and Strength Toughness of Cutters

Author: MengHaiBo
Tutor: HanLuJia
School: China Agricultural University
Course: Agricultural Products Processing and Storage
Keywords: straw mechanics properties cutting process test-bed High-speed-photograph failure analysis
CLC: S817.12
Type: PhD thesis
Year: 2005
Downloads: 502
Quote: 10
Read: Download Dissertation

Abstract


It is significant for the Country and people, even for sustainable agricultural ecosystem to utilize and develop crop straw resources. Cutting process of straw is the first important tache for feeding and commercial production of straw during the utilization of straw feed. Cutting process of straw affects the energy consumption of the machine, causes wastage of cutters on the machine, and have an impact on the straw process quality. The physical properties of straw are important basis for designing and improving the machine and processing technics, and it varies greatly from the engineering materials. Therefore, the test-bed of physical properties which could simulate the cutting process of straw was designed to provide the academic basis for optimizing the parameters of the machine. The abrasion resistance and strength toughness of cutters with cutters of different materials, different structures and different processing were studied. Results have been showed as below.Firstly, mechanics properties of corn straws have been discussed by experiment on three-point bending corn straws on the materials testing instrument in the paper. The microstructure of corn straws has been observed by SEM. Results show that there were two phases during the rupture of corn straw. Maximum of broken force reached 215.44N, and that of displacement reached 15mm. The mechanics of corn straws is relative to its microstructure. Broken force was affected by cross area of straws, storage time and position of nodes.Secondly, based on analysis of the structural theory of the machine processing straw, a new test-bed cutting straws has been developed. It contains four systems, includes accelerating system, acquisition system of strain parameter, high-speed photographs system and main controlling system. And it is convenient to arrange testing apparatus on the test-bed. And it is easy to operate.Thirdly, The cutting process of straws has been recorded by high-speed photograpy camera. Motion law for the process of straw cutting was analyzed with MAS (motion analysis system).Fourthly, based on the experimental study and theoretic analysis, key factors affecting the process of cutting of corn straws have been researched on the new test-bed for cutting straw. Cutting speed and clearance between moving and fixed cutter are both the key parameters affecting the cutting resistance and rate of cutting straw for wheat and paddy straw which are acerose and flexile, influence of tartness of the cutters on the cutting resistance and rate of straws cutting was very important as well.Fifthly, the paper investigates the relationships between the cut resistance, cutting rate and key factors, such as cutting speed, clearance between moving and fixed cutters, count of cutting straws, and straws water content by means of regression orthogonal analysis method. Regression models about the relationships were established. A target function from cut resistance model and rate of straws cutting model has been constructed by weighted linear summation method. A bi-index optimization of straws cutting has been carried out by Matlab , and a group of optimized parameters were obtained.Finally, cutters abrasion experiment has been conducted on the 9RZ-60 model straw rubbing and cutting machine in the paper. Macro-analyses and micro-analyses, and analyses of chemical compositions of the cutter made of 65Mn and metallographic examinations are observed by SEM. It indicated that bladematerials and cutters position in the workroom on the machine and properties of straws were the main factors to the blade wear respectively. Because of over-heated, hardness of part blade on the cutter is inadequate. The cutter made of 65Mn was not heated specially after forging. A new heat treatment scheme was conducted, and collocation of cutters in the workroom was changed, and three kinds of feeding form were designed. Results show that the life of cutters was extended, and blade materials wastage was reduced, and productivity of the rubbing and cutting machine was increased, process quality was improve

Related Dissertations

  1. Study on the Simulation of Agricultural Non-point Source Pollution in Huaihe River Basin in Henan Provice,X52
  2. Effects of Fermentive Cornstalk Culture Medium Mixture Ratio on Physical and Chemical Characters in Potted Peony,S685.11
  3. Studies on the Process and Facilities of Straw-Excrement Ferment Technology for Biogas and Biological-Organic Compound Fertilizer,S141
  4. The Study of Oat Straw Mixed Ensilage with Tall Fescue or Perennial Ryegrass in Tibet,S816.53
  5. The Effectr of Lactic Acid Bacteria and Rice Bran on Dynamic Change of Rice Straw Silage Fermentation,S816.53
  6. Study on Fuel Supply of Henan Straw Power Generation,TM619
  7. Trial Research on the Small Straw Burying and Mud-liquid Mixing Equipment for the Machine of Straw Back into Field Using in Paddy Field,S224.29
  8. Design and Experimental Reserch on the Returning Straw Fertilizer Drill,S223.25
  9. Research on the Evaluation of Straw Resource and the Development of Scale-Up Straw Energy Utilization in Jiangsu Province,S38
  10. Greenhouse Gases Emissions from Different Rotation Systems in Paddy Fields,S511
  11. Effects of Soil C/N with Increasing Compost Wheat Straw on the Carbon and Nitrogen Metabolism and the Quality of Flue-cured Tobacco Leaves,S572
  12. The Effects of Isoflavones in Soybean Straw on the Growth and meat Quality of Goat,S826.5
  13. Effects of Added Maize Straw and Citric Acid on Cu and Cd Availability in Soil,X131.3
  14. QTL Mapping and Inherit Analysis of Protein and Ligin Content of Soybean Green Straw,S816
  15. Effects of Adding Brewer’s Grains on Fermentation Quality of Mixted Ensilage with Crop Straw and By-Products,S816.53
  16. Study on Dynamic Relationship between Labile Soil Organic C, N and Crop Growth under Straw Incorporation,S158
  17. Study on Effects of Straw Channel-Buried Returning in Rice-Wheat Rotation Field,S141.4
  18. Straw combustion emissions PM 2.5 in the study of organic matter,X712
  19. Automatic Test-bed of the Vehicle Heater and Data Management System,U464.13
  20. Studies on the Restoration Technology of Severe Alkali-Saline Grassland in Dorbod Heilongjiang Province,S156.4
  21. Development and application of Shandong Laizhou straw,J528

CLC: > Agricultural Sciences > Livestock, animal medicine,hunting,silkworm,bee > General Animal Science > Animal husbandry machinery and equipment > Feed harvest processing machinery > Feed processing machinery
© 2012 www.DissertationTopic.Net  Mobile