Dissertation > Excellent graduate degree dissertation topics show

A Study of Metal-ceramic Bonding on a New Type of Cobalt-chromium Alloy for Both Dental Framework and Porcelain Fused to Metal

Author: WuJunLing
Tutor: ChaoYongLie
School: Sichuan University
Course: Clinical Stomatology
Keywords: cobalt-chromiumalloy preoxidation sol-gel nano-scale- material sputter plasma spraying
CLC: R783
Type: PhD thesis
Year: 2005
Downloads: 170
Quote: 4
Read: Download Dissertation

Abstract


With the development of prosthonditics, a new technique which combines PFM technique and casting framework of RPD appears and has being applied by more and more dentists. So we developed a new type of Co-Cr dental alloy which has good metal-porcelain matching and could be cast for RPD framework. The fomer research showed that it had good biological compatibility and mechnical capability for clinical use. But how to improve the bonding strength of the porcelain bonded to alloy becomes the key point of our research in order to get better restorative effect. Thus we used five different surface treatment technologies to the aolly, and discussed their effects on metal-porcelain bonding strength. In the same time the interface between metal and porcelain was observed and analyzed by SEM and EPMA. The conclusions were drawed as followings:（1）Before applied for porcelain, the aolly should be oxidated for 5 minutes at the temperature of 980℃.（2）Using the Sol-Gel technique could improve the bonding of the porcelain to our alloy.（3）Before applied for porcelain, the metal substrate surface was smearedwith nano-scale material （nano-SiO2、 nano-gold particles）, and the nano-scale material had a positive effect to increase the bonding strength.（4）Two methods of vacuum coating film were used in our study in order to increase the bonding strength , one was magnetron reactive sputter deposition, and the other was electron beam vapour deposition. The former had a positive effect while the latter had a negative effect.（5）The plasma spraying technology had a significative function in enhancing the bonding strength.

Related Dissertations

  1. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  2. Study on Enhance Efficiency and Mechanism of BAC Process for Nitrogen Removal by Preoxidation,X703
  3. Study on Preparation and Properties of Polyimide/SiO2 Hybrid Films,TB383.2
  4. Investigation of Plasma Sprayed NiCr-Cr3C2 Coating on Mould CrZrCu Alloy Plates,TG174.442
  5. Preparation and Luminous Property of Tm and Dy Doped YSZ Coating,TG174.442
  6. Preparation and Characteristic of BiFeO3 /Bi3.25 La 0.75 Ti3O12 Multiferroic Bi-layer Films,O484.4
  7. Investigation into ZnO Thin Film Transistors Prepared by Sol-gel Method,TN321.5
  8. Sol - gel method p -type ZnO films,O484.1
  9. Nano zirconia thermal barrier coatings prepared by plasma spraying and Properties,TG174.442
  10. Study on Implant Material of Carbon/Carbon+Hydroxyapatite Coating (C/C+HA) Composites,R318.08
  11. The Exploration on Electroluminescence of ZnO Thin Films,O484.41
  12. Plasma Spraying Nano ceramic coating microstructure and properties of,TG174.442
  13. Technology and Properties of vanadium oxide thin films,TB383.2
  14. Synthesis and Characterization of Sb-doped SnO2-（CeO2-TiO2） Composite Thin Films Deposited on Substrates for Antistatic Electricity and UV-Shielding,TB383.2
  15. Preparation of Mesoporous ZnO Material and Study on Its Gas Sensing Properties,TB383.2
  16. Research on the Tech nology of Plasma Spraying Corrosion Resistance Coating,TG174
  17. Key Electrodes of SOFC Fabricated by Multi Phase Plasma Spraying,TG174.442
  18. Study on Forming Mechanism of the Fe-Al2O3-FeAl2O4 Composite Coating by Reactive Plasma Spraying,TG174.442
  19. The Study of Plasma Beam Sputtering System,TG174.442
  20. Static Oxidation Behavior of Superalloy GH99 and Mcraly(Ta) (M=Ni,Co) Coatings at High Temperatures,TG174.44
  21. The Investigation on Dilute Magnetic Semiconductor Doped Non-magnetic Elements and Soft Magnetic Composites,TB383.1

CLC: > Medicine, health > Oral Sciences > Oral orthotics
© 2012 www.DissertationTopic.Net  Mobile