Dissertation > Excellent graduate degree dissertation topics show

Pick Assembly Angle Research of Roadheader Cutting Rock

Author: ZuoJianWei
Tutor: LiXiaoHuo
School: Liaoning Technical University
Course: Mechanical Design and Theory
Keywords: roadheader pick cutting rock assembly angle load simulation
CLC: TD421.5
Type: Master's thesis
Year: 2011
Downloads: 107
Quote: 0
Read: Download Dissertation

Abstract


In order to study on the relation of pick assembly angle and pick cutting performance when roadheader cutting rock and get the reasonable pick assembly angle, an analyze about the pick assembly angle used in actual project is done to assure the assembly angle that need to research in this paper. The pick assembly angle is described as cutting function angle and assemble process angle, and a translation method between the two kind of description way is built. Assuming that cutting resistance and traction resistance submit to Gamma distribution while side force submit to normal distribution, and considering their correlation, computer imitation is used by applying stochastic process theory and writing MATLAB programs, the magnitude and change law of cutting resistance,traction resistance and lateral resistance on pick are obtained. A deformable pick model fitted with cemented carbide peak and a rock model based on Extended Liner Drucker-Prager constitutive model are established by ABAQUS. The finite element model is simulated by explicit kinematic analyze module of ABAQUS/Explicit. Either the magnitude or change law of the Three direction forces on pick are obtained. Comparing the simulation result and the mathematics model analyze result, the reliability of the finite element model is verified. The influence of cutting angle and rotate angle to the force and moment when pick cutting rocks are studied according to change the position parameters of pick in the finite element model, and the change tendency of pick load characteristics following cutting angle and rotate angle are obtained. The influence of pick assembly angle to the pick rotate ability is analyzed using a dynamic model established by ADAMS, according to put the load and moment characteristics got in ABAQUS simulation into the dynamic model. The reasonable cutting function angle is obtained and is translated to assembly process angle. The result show that when the cutting angle is 42°~46°and the rotate angle is 7°~12°, the pick can cut into rock in a better way,and it is good for pick rotation. And it can also prolong the life expectancy and improve the working efficiency of cutting head. By translating the pick assembly angle to assembly process angle used in practice, a reference is provided for better design of cutting head of roadheader.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Industrial Technology > Mining Engineering > Mining machinery > Mining machinery > Underground mining machinery > Boring machine
© 2012 www.DissertationTopic.Net  Mobile