Dissertation > Excellent graduate degree dissertation topics show

Research on a New Helical Cone Grinding Theory and Cutter Grinding Machine

Author: ZuoDeZhong
Tutor: ZouPing
School: Northeastern University
Course: Mechanical Manufacturing and Automation
Keywords: helical cone face cutter grinding machine mathematic model geometric angle measurement finite element simulation
CLC: TG596
Type: Master's thesis
Year: 2009
Downloads: 55
Quote: 0
Read: Download Dissertation

Abstract


Drilling is one commonly-used processing method in the production process and one of most important procedures in metal-cutting process.approximately accounting for one-third of all metal-cutting processes.If the geometry and the angle of the drill point are reasonablely chosen,drilling performance will be improved and processing efficiency will be increased in a large extent, so, many scholars have been committed to the research on new drill point and new methods for grinding twist drill.On the basis of research on conical grinding method and variable lead helicoids grinding method,the author puts forward a new method for grinding twist drill—helical cone grinding method.First,the paper discusses the grinding principle and the movement form of the conical grinding method and variable lead helicoids grinding method,and proposes movement form of the helical cone grinding method.On the basis of mathematic model of conical grinding method and variable lead helicoids grinding method, the author derive the equations of rake face and flank face of the helical cone drill point in the drill point coordinate system and the grinding equation of the flank face in the machine coordinate system and determine the grinding parameters of helical cone grinding method.On the basis of determining movement form of helical cone grinding, the three-dimensional model of the helical cone cutter grinding machine is drawn by using UG softwear and the kinematics simulation is done. The relationship between grinding parameters and geometric parameters based on the mathematic model and draw the curve of grinding parameters influencing on geometric parameters is derived by using matalab.After analyzing the character of grinding parameters, one of grinding parameters is fixed and one-to-one correspondence between grinding parameters and geometric parameters is defined.Otherwise, the interface for calculating parameters of helical cone drill point is established with Delphi softwear to determine quantitative relationship between grinding parameters and geometric parameters.After analyzing sensibility of grinding parameters, how great grinding parameters impact on geometric parameters is identified to provide a basis for manufacture of structure and control system of cutter grinding machine.The three-dimensional model of helical cone drill point is established and its angels are measured proving that its back angel and its geometry are reasonable.Drilling process of helical cone drill point is simulated by using FEM analysis softwear Deform3D,comparing the result with cone drill point’s to prove the machinability of helical cone drill point is better than cone drill point’s.

Related Dissertations

  1. Research on Optical Surface Testing with Interferometers,TG84
  2. Research on the Technology of Measurement and Error Evaluation of Gear Hob,TG721
  3. High Speed Frequency Measurment and Non-Linearity Correction of Frequency Modulated Capacitive Displacement Sensor,TH822
  4. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  5. Development of the On-Line Electronic Gauge for Crackshaft’s Axial Length Parameters,TH822
  6. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  7. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  8. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  9. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  10. Maneuver Detection and Tracking with the Radar Rate Measurement,TN953
  11. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  12. Research on Visual Measurement for Spacecraft Rendezvous and Approach,TP391.41
  13. Modeling Internet Link Delay Based on Measurement,TP393.4
  14. Measurement-Based Analysis and Modeling of Internet Delay,TP393.4
  15. A Study on the Metrology Knowledge in Wu Jing Zong Yao,TB9
  16. Study on Detection System of Deepwater Pipeling Pose Measuring Device,TE973.3
  17. Research and Application of the Oil Gas Water Measuring Technique Based on GLCC,TE33
  18. Structural Design & Prototype Development on Deepwater Pipelines Position Measuring Device,TE973
  19. Coal miners and practice unsafe behavior measurement,X936
  20. Based on low-energy rays oil moisture measurement instrument of fast,TE622.1
  21. The Large Concrete Hydration Heat Temperature Effects Research of the Cable Stayed Bridge,U441.5

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Grinding and grinding machine > Process control of grinding machines and CNC grinder
© 2012 www.DissertationTopic.Net  Mobile