Dissertation > Excellent graduate degree dissertation topics show

Multi-Polymer Material Cement System Properties Research Increasing Zonal Isolation Performance

Author: LiZaoYuan
Tutor: LuoPingYa；GuoXiaoYang
School: Southwest Petroleum University
Course: Oil and Gas Field Development Project
Keywords: cement sheath zonal isolation material design matrix-plasticity production life
CLC: TE256.7
Type: PhD thesis
Year: 2006
Downloads: 432
Quote: 0
Read: Download Dissertation

Abstract


The effective zonal isolation of cement sheath during the whole period is the procondition for production in the oil field, Zonal isolation of cement sheath have direct relationship to the production life of the oil well, which have attached most importance to the property of the zonal isolation, and the more research have been done for them. This paper based on the cement slurry’s material research, increasing the slurry’s properties and the cement stone’s solid properties by material designing, improving the long zonal isolation property of cement sheath, and then prolonging the production life of the oil well.This paper optimized the latex polymer SBR, fiber XW, rubber particle XJF-80 and elastic particle EP-II, and optimized stabilization SA, dispersant DS-1, defoamer GR-1 and retarder HN-1 for SBR latex cement system, developed high density, normal density and lightweight SBR latex cement and composite material cement system. latex and composite material cement slurry have good rheologic and low filter property, thickening time can be adjusted and have right-angle property, especially composite material cement stone have good mechanical deformation property.Accomplished latex cement slurry’s anti-gas migration research, latex cement stone anti-corrosion research by simulated formation water, and micro mechanism research about latex cement system. SBR latex delayed the phenomenon about the cement slurry’s hydrostatic pressure decreasing and increasing the gas invasion resistance for the cement slurry. And latex structure formed inner cement is the primary reason for increasing cement slurry anti-gas migration capacity. Spectral analysis, X-diffraction analysis and SEM analysis showed that latex filled in cement stone and formed netlike structure is the primary reasons to increase cement anti-corrosion.Experiment analysed cement material and additive’s effection on cement stone’s deformation in uniaxial and triaxial stress. Latex and rubber particle can increase the plasticity deformation capacity of cement stone, and fiber can increase elasticity deformation restorability of cement stone in low stress and plasticity deformation capacity in high stress; When curing time increasing, cement stone’s elasticity deformation restorability in low stress and plasticity deformation capacity in high stress decreased. Cement stone is brittleness in uniaixial stress, but brittleness will converted to plasticity when cement stone confined to crack, which showed brittleness-plasticity behavior in triaxial stress.Discussed the theoretical basis for cement stone’s mechanical properties improvement from cement hydration and solidification, improve the content of C-S-H gel hydration, adding some additive or material to matrix-plasticity, and adding material to resist internal fissure extension in cement stone can achieve the aim of decreasing brittleness and increasing flexibility of cement stone. This paper put forward the design principle of cement stone’s matrix-plasticity to increase zonal isolation of cement sheath, which include four methods such as crystal phase matrix-plasticity, gel phase matrix-plasticity, particle filled in cement hydration and intergranular bridge, which will decrease cement stone’s brittleness before

Related Dissertations

  1. Study on Full-life Asphalte Pavement Design and Construction of Xi’an-Tong’chuan Expressway,U414
  2. Analysis of Casing Rupture with Finite Element in Complex Stratum,TU452
  3. Movie Course as the main object of study of film and television audiovisual said textbook research,H319
  4. Life Cycle Assessment on Production and Research on Economic Analysis of Biodiesel,TE667
  5. On Design Language in Contemporary Lacquer Painting Through Its Materials,J213.9
  6. Higher Vocational Colleges of Hotel Management Professional Training Materials Designed Studies,F719-4
  7. External Load Calculation and Strength Analysis of Casing under the Combined Effects of Strata and Cement Mantle,TE931.2
  8. The APT production environment load research based on life cycle assessment,TQ136.13
  9. Research on Environmental Impact of Sintered Brick Production in China,TU522.1
  10. Research on Fatigue Property of Semi-flexible Pavement,U414
  11. The Development of Scale for Insomnia with the State of over Anxiety and the Relative Rerserch on Life Events,R740
  12. Insurance Corporation production insurance interactive business issues,F840
  13. Research on Evaluating the Several Methods of Hydrogen Production Technology by Life Cycle Assessment,TQ116.2
  14. From the material space to the space of the mind,TU238.2
  15. The Analysis of Casing Mechanism Model Calculation,TE931.2
  16. Some General Solutions to the Thermoelastic Problem of a Circular Inclusion with Interfacial Defects,TF813
  17. Expression of NPY and AgRP in the Hypothalamus of the Diet-induced Obese and Diet Resistant Rat,R589.2
  18. The material of modern regional architecture design performance,TU-80
  19. Research and Application on Enhancing the Cementing Quality Technology of the Tertiary Infilling Adjustment Well,TE256
  20. The Corrosive Laws of Oil Well Cement by CO2 and Applied Research,TE983
  21. Design, Synthesis and Properties of n-type Bi2Te3/BayNixCo4-xSb12 Graded Thermoelectric Material,TB34

CLC: > Industrial Technology > Oil and gas industry > Drilling engineering > Wash wells, cementing,completion,reservoir damage and prevention > Cementing engineering > Slurry performance measurement and test
© 2012 www.DissertationTopic.Net  Mobile