Dissertation > Excellent graduate degree dissertation topics show

Microstructure and Superhardness Effect of the Hard Nano-multilayer Films

Author: YueJianLing
Tutor: LiGeYang;GaoWei
School: Shanghai Jiaotong University
Course: Materials Science
Keywords: Nano-multilayer films superhardness effect strengthening model template effect crystallization of amorphous coherent interface alternating stress field
CLC: TB383.2
Type: PhD thesis
Year: 2008
Downloads: 460
Quote: 2
Read: Download Dissertation


The ceramic hrad films, such as TiN, have been widely applied in some fields of surface modification and protection inclunding coatings of cutting tools. The development of dry and high-speed cutting demands protective cutting-tool coatings with not only high hardness but also good thermal stability at high temperatures. Nanomultilayer films show much potential in the coatings fields of cutting tools, for they can obtain high hardness due to the superhadrness effect and especially can present flexiable performace modification by changing their constituents. Additionally, the nanomultilayer films can obtain high hardness by designing their structure, which shows more research value. However, it’s impossible to design the superhard nanomultilayer only according to the theory now, which leads that the experiments are still the main intestigation method to obtain the nano-multilayer films with high hardness.In this work, VN/SiO2, VN/AlON, ZrO2/TiN and TiAlN/Si3N4 nanomultilayer films were synthesized by magnetron sputtering method, and their microstructure and mechanical properties were characterized by XRD, TEM, EDX, SEM and nanoindentation. The main studies in this work are described as follows: It was investigated that the reactive sputtering method to synthesize the oxide-composed nanomultilayer films, the template effect in nanomultilayer films with different structural template layer that the crystal template can affect the growth of the other layer, the high-temperature thermal stability of nanomultilayer films, and the strengthening models of nanomultilayer films. Finally, the present designing rule for nanomultilayer films with high hardness were modified and supplemented based on the research results.The main conclusions in this work are summarized as follows:1. The studies on the VN/SiO2 and VN/AlON multilayers indicate that the reactive sputtering method with higher deposition rate can be successfully used to synthesize the oxide-composed multilayers with high hardness. The results show that, under the template effect of Nacl-type VN, normally amphorous SiO2 and AlON with very low thickness (<1nm) can be crystallized and further grow epitaxially with VN layer, accompanied by a remarkable increase in hardness of multilayers. On further increase of SiO2 and AlON layer thickness, the SiO2 and AlON gradually transform into amorphous structure, resulting in a rapid decline in hardness. On the other hand, the change of VN layer thickness shows a relatively small effect on the growth structure and mechanical properties of the nanomultilayers.2. The studies on ZrO2/TiN multilayers show that the tetragonal structural ZrO2 also presents the template effect like the NaCl-type structural TiN. Under this template effect, TiN with layer thickness lower than 1.8nm can grow into metastable tetragonal structure and grow epitaxially with ZrO2. With further increase of thickness, TiN gradually transforms into NaCl-type structure and blocks the epitaxial gowth of multilayers, resulting in a rapid decline in crystal integrity. In addition, ZrO2/TiN multilayers don’t present the superhardness effect, for the coherent strain in multilayers can change the modulus of the modulation material.3. The studies on TiAlN/Si3N4 multilayers show that under the t1emplate effect of TiAlN, normally amorphous Si3N4 with low layer thickness (<0.6nm) can be crystallized and grow epitaxially with TiAlN layer, accompanied by a remarkable increase in hardness. On further increase of layer thickness, Si3N4 gradually changes into amorphous structure, resulting in a quick decline in hardness. The research about the thermal stabilities of nanomultilayer films indicates, TiAlN/Si3N4 nanomultilayer films present good high-temperature structural stability, and their crystal structure and modulation structure can still be stable even at 900℃, which results in their higher hardness than TiAlN single film. However, TiAlN/Si3N4 nanomultilayer films don’t show apparently higher oxidation resistance than TiAlN single film.4. The studies indicate that it’s necessary to form a coherent structure for nanomultilayers in order to obtain high hardness, The modulus-difference strengthening dominates the superhardness effect compared with the alternating stress field strengthening, but it should be taken into account that the effect of alternating stress field on the modulus of modulation layers in nanomulatilayer films. Based on these studies, the present designing rule for nanomultilayer films with high hardness were modified and supplemented in this work, which were mainly described as follows:1) The two modulation layers should form the coherent structure;It’s necessary to form a coherent structure between the two modulation layers for nanomultilayer films to obtain high hardness, but it doesn’t mean that the lattice parameters of two modulation layers have to be nearly equal. Under the template effect, the nanomultilayer films can also grow into coherent structure even if their lattice parameters have a large difference.2) The modulus difference of two modulation layers under the coherent strain should be as large as possible;A large difference between the modulus of two modulation layer with coherent structure is the main reason for nano-multilayer films to obtain high hardness. However, herein the modulus isn’t the modulus of the bulk constituents of multialyers, but the modulus of two modulation layer under the coherent strain in nanomultilayers.The above modification and supplement to the present designing rule can expand the scope of material combination for nanomultilayer films with high hardness.

Related Dissertations

  1. Crystallization of Calcium Carbonate on Chitosan and Silk Fibroin Substrates,O614.231
  2. Microstructure and Mechanical Properties of VC Film and VC/Si3N4 & V2C/Si3N4 Nano Multilayers Synthesized by Reactive Sputtering,TG174.444
  3. Microstructure and Mechanical Properties of NbN/AlN Multilayer Films and AlCN, TiAlCN Composite Films,TG174.44
  4. Research on Synthesis and Properties of AlN/Si3N4 Nanostructured Multilayers and Zr-Si-N Composite Films,TB383.1
  5. Study of Preparation and Magnetic Properties of Rapid Quenched NdFeB Ribbons,TM273
  6. Study of Ti/DLC and W/DLC Nano-Multilayers Fabricated by PIIID Technique,TG174.4
  7. One-step Synthesis of Oxo-crown Ethers by Catalytic Ring-enlargement of γ-but-yrolactone Inserted by Alkylene Oxide,TQ223.25
  8. Synthesis, Crystal Structures and Properties of Porous Coordination Polymers with N-containing Heterocyclic Ligands,O641.4
  9. Nonlinear Diffusion Kinetics of the Inward Atoms to Nano-scale Multilayers,TB383.2
  10. Research on the Technique and Mechanism of Coloring on Copper and Zinc Alloy,TG177
  11. High-strength steel wire mesh and polymer mortar reinforced concrete beam flexural test study,TU375.1
  12. The Influence on the Glass Forming Ability of Mg-base Bulk Amorphous Alloys by the Replacement of the Rare Elements and the Research on Crystallization Kinetics Behavior,TG139.8
  13. Design and Synthesis of ZrN/WN and CrN/ZrN Nanoscale Multilayered Coatings by Magnetron Sputtering Technique,O484.1
  14. Nano-multilayer film interface diffusion nonlinear dynamics theory,TB383.1
  15. Study on Growth Structure, Superhardness Mechanism and High Temperature Stability of AlN-Based Nano-Multilayer Films,TB383.1
  16. Strong magnetic field non - Crystallization Structure and Properties of,TM273
  17. Synthesis and Property of Novel Crown Ether Annulated Tetrathiafulvalene Derivatives,O621
  18. Modulation Structure and Mechanical Behavior of Fe/Cu Nanometer-scale Multilayers,TB383.1
  19. The Microstructure、Superhardness Effect and High Temperature Oxidation Resistance of VN/SiO2 and TiAlN/Si3N4 Films,TB383.2
  20. High Pressure Torsion Deformation and Strengthening Models of Aluminium Alloys,TG146.21
  21. Template and Superhardness Effects in Two-phase Nanostructured Films,O484

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile