Dissertation > Excellent graduate degree dissertation topics show

Preparation and Optical Properties of the Series Nanomaterials of CuInS2/Cu-In-Zn-S

Author: FengLi
Tutor: LiangXiaoJuan
School: Wenzhou University
Course: Applied Chemistry
Keywords: CuInS2 Cu-In-Zn-S nanocrystals wurtzite third-orderoptical nonlinear
CLC: O611.4
Type: Master's thesis
Year: 2012
Downloads: 25
Quote: 0
Read: Download Dissertation

Abstract


Because of a series of excellent physical and chemical properties aswell as optoelectronic devices and biomedical applications, metalchalcogenide semiconductor nanomaterials have become one of the mostactive research areas on physics, chemistry, materials science and manyother subjects. Systematic development of new metal chalcogenidesemiconductor nanocrystals as well as in-depth study of their optical,magnetic and electrical properties will help give full play to the maximumpotential of this type of material.Previous studies have concluded that the material properties and itsapplication depended not only on the structure of the material itself,crystal, composition of the material itself but its size and morphology alsoplayed a key role in the application. So the controlled synthesis ofdifferent sizes and morphology of semiconductor nanomaterials is not onlytheoretical significance and can be expanded application of nanomaterials. In this paper, a simple, convenient A-Pot method has been used tosynthetize morphology controlled CuInS2, Cu-In-Zn-S, and the otherchalcogenide semiconductor materials. The linear optical properties andnonlinear optical properties have also to be researched. The main contentsof this article are as follows:（1） We give a brief introduction on nanomaterials and quantum dots,and then describe the synthesis of nanomaterials and applications ofnonlinear optical properties.（2） By A-Pot method to synthesize CuInS2nanoparticles: whenacetylacetone copper, copper iodide, and copper acetate, to be used coppersource respectively, the testing of TEM found that rod like CuInS2nanocrystals can be got using acetylacetone copper as copper source.Temperature has an important factor on their particle size control usingiodide copper. The result showed the larger particles with the highertemperature. Through discussion of package agent dosage we founduniformity degree of crystallinity is better when the molar ratio of thiolagents to precursor is40times. By discussing the different packages agentwe found that when using dodecanethiol and size smaller than the excitonBohr radius, CuInS2nanocrystals can be light. But oil amine and oleic acidas ligand that is susceptible to quench the luminescence of nanocrystallineCuInS2.（3） Using A-Pot method, different ratio of the precursors, different reaction temperature, and different precursors played a key role inCu-In-Zn-S alloy nanocrystals structure, morphology, and properties. Wealso found that temperature could change the Cu-In-Zn-S alloynanocrystals structure. Setting the ratio of Cu: In: Zn: S=2:1:1:4, thewurtzite Cu-In-Zn-S alloy nanocrystals can be generated. When Cu: In: Zn:S is x: x:2（1-x）:2, chalcogenide Cu-In-Zn-S alloy nanocrystals can begenerated. Different precursors have an impact on the different structureand morphology Cu-In-Zn-S alloy nanocrystals. When Cu: In: Zn: S=x: x:2（1-x）:2, emission spectra can be adjusted from485to740nm byadjusting x （0-1）. Setting the ratio of Cu: In: Zn: S=2:1:1:4, the wurtziteCu-In-Zn-S alloy nanocrystals with emitting in the range from649to777nm can be generated under the240oC. Different structure Cu-In-Zn-Salloy nanocrystals had different third-order optical nonlinear by Z-scan.The third-order nonlinear susceptibilities of chalcogenide and wurtziteCu-In-Zn-S alloy nanocrystals are3.82×10-12esu,1.11×10-11esu.

Related Dissertations

  1. Cathode Materials Preparation and Its Electricity Generation Performance in Microbial Fuel Cells,TM911.4
  2. Studies on Synthesis of CdSe by Aqueous Solution Method,TN304
  3. The Effect of Polaron in Wurtzite GaN/Alx Ga1-x N Quantum Well,O471.1
  4. Preparation and Application of the Mn-Doped ZnSe and Otherwise Fluorescent Quantum Dots,O611.4
  5. Electron Mobility in Wurtizite Nitride Quantum Wells and the Modulation by Strain and Pressure,O471.1
  6. Solar cell material CuInS_2 film nanorod arrays research,TM914.4
  7. Preparation of CuInS2 and ZnS Thin Films Materials for Solar Cells by Chemical Deposition,TM914.4
  8. G_aP_ (1-x) N_x G_aA_ (s1-x) N_x alloy system of the basic research,O472.3
  9. Theoretical Studies of GaN Nanotubes and Development of GaN Tight-binding Model,O481.1
  10. Solution Synthesis, Growth Mechanism, and Property Investigations of Chalcogenide Semiconductors in Nanoscale with Ploynary Structrure and Shapes,O611.3
  11. Investigate on Stuctural and Electrical Properties of PbMoO4 Crystals and Dumbbell-Like ZnO Microcrystals at High Press,O521.2
  12. Frist-Principles Calculation of Electronic Structure and Lattice Dynamic Properties of S-Doped Wurtzite ZnO,O472
  13. Synthesis and Photoelectric Properties Study of the Wurtzite Cu2ZnSnS4Nanocrystals,O611.4
  14. Molecular dynamics simulation of phase change Zinc Oxide high-pressure clusters,O614.241
  15. Preparation of Carbon Nanotubes/Cadmium-sulfide and PEI/CdS Composite Materials and Their Optical Properties,TB332
  16. Preparation and Lithium Storage Properties of Mixed Transition Metal-VIA Compound Nanomaterials,TB383
  17. Synthesis and Optoelectronic Properties of Cu2S and CuInS2Nanostructures,TB383
  18. Research on the Construction and Photoelectric Properties of ZnO/CuInS2and ZnO/CuInS2/CuSCN Heterostructures,TB383
  19. Fabrication of Functionalized TiO2 Nanotube Arrays and Their Photocatalytic Application,TB383
  20. The Synthesis and Physical Propetries Studies of One-Dimensional Indium Nitride Semiconductor Nanomaterials,TB383

CLC: > Mathematical sciences and chemical > Chemistry > Inorganic Chemistry > Chemical elements and inorganic compounds > Inorganic synthetic chemistry
© 2012 www.DissertationTopic.Net  Mobile