Dissertation > Excellent graduate degree dissertation topics show

Synthsis and Properties of Waterborne Acrylic Anodic Electrophorctic Paint

Author: WangYan
Tutor: WangHuaLin
School: Hefei University of Technology
Course: Applied Chemistry
Keywords: acrylic resin anodic electrophretic paint modified organic silicone corrosionresistance water resistance
CLC: TQ637
Type: Master's thesis
Year: 2012
Downloads: 98
Quote: 0
Read: Download Dissertation


Acrylic electrophoretic paint has several advantages, such as high utilization of thepaint, low-pollution, and wide range of sources of raw materials. In order to improve thetemperature resistance of acrylic anodic electrophoretic paint and corrosion resistance,acrylic anodic electrophoretic paint was synthesized by acrylic acid, methyl acrylate, butylacrylate, hydroxypropyl acrylate and styrene and modified by organic silicone in this work.The structure and properties of the paint were characterized by FT-IR, DSC and TG andfilm performances tests.(1)Basing on mechanism of radical polymerization, BPO was used as the indicator andthe reaction temperature was kept at the boiling point of nbutanol116-117℃When theratio of solvent to monomer was (0.4-0.57)∶1, higher resin viscosity and monomercoversion rate was obtained. The paint was clear and had good water solubility when theratio of soft monomer and hard monomer was (5.5-6.3)∶1.(2)With amino resin as the crosslinking agent, when the amount of amino resinreaches to13%, the crosslinking degree of film can be achieved in more than90%.Ethanolamin was used as the neutralizer and we can get film with good water-solublility.(3)Organic silicone was added with part of monomer, and then the rate of monomerconversion was higher with no gel phnomenon. When the amount of silicone was increased,the resin viscosity was higher while solid content of paint decreased, and the waterabsorption of the film was greatly reduced and corrosion resistance has been improved.(4)The resin was successfully modified by organic silicone; and with increasingsilicone content, the glass transition tempertature of film was increased to61.2℃for theamount of silicone at1.6%; moreover, the decomposition temperature of resin wasimproved after being modified. We can get better film performance when theamount of silicone was0.8%-1.0%.

Related Dissertations

  1. Study on Preparation of Composite Cross-linked Modified Modified Potato Starch,TS236.9
  2. Coupled Dynamics of Excitable Systems Base on Morris-Lecar Model,Q42
  3. Under microaerobic conditions closed calcium carbide furnace exhaust COS gas adsorption purification,X781
  4. Synthesis and Application of A Novel Series of Cation Hydrophobically Modified Polyacrylamide,TQ323.6
  5. Study on the Synthesis and Adsorption Behaviour of Chitosan Derivative,TS254.9
  6. Modification and Application of the Waste Fluorgypsum and the Treating of High Concentrations Fluoride Wastewater,X703
  7. Adsorption Effects of Phosphate and Chromium from Aqueous Solution by Adsorption Using LDH and Mg/Fe/Al Modified Montmorillonites,X703
  8. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  9. Study on Organic Silicone Modified Epoxy Resins Performance and Preparation of Adhesive,TQ323.5
  10. Research on Detection of the Carbamate Pesticides by Aminoacids-matal Ions Films Chemically Modified Sencor,S481.8
  11. Complete Genomic Sequence and Biological Characteristics of a New Alfalfa Mosaic Virus Isolate,S435.4
  12. Study on Composite Modification of CaO-based Sorbent,TQ424
  13. Synthesis and properties of self-cross -linked acrylic resin,TQ325
  14. Synthesis and Application of Alkali Soluble Acrylic-Styrene Resin,TQ320.6
  15. Study on Influence of Polyacrylamide on Properties of Cement Paste,TU528
  16. Study on Detection of Transgenic Ingredients in Genetically Modified Cottonseed Meal and Its Degradation during Feed Processing,S816
  17. Based on information fusion safety assessment of genetically modified foods,TS201.6
  18. Studies on γ-Al2O3 Supported Palladium Catalysts for Hydrogenation of C9 Petroleum Resin,TE624.9
  19. Determination of Small Biomolecules and Drug Molecule by Acylpyrazolone Composite Film Modified Glassy Carbon Electrode,TQ460.1
  20. The Optical Design of Solar Simulator and Applied Study,O439
  21. Research on Distribution Center Location Problem under C2C E-commerce,F259.2;F724.6

CLC: > Industrial Technology > Chemical Industry > Paint Industry > Special paints
© 2012 www.DissertationTopic.Net  Mobile