Dissertation > Excellent graduate degree dissertation topics show
Microwave-assisted Solvothermal Synthesis and Gas Sensitivities of Nanostructured SnO2
Author: ManLiYing
Tutor: WangJieQiang
School: Jinan University
Course: Materials Processing Engineering
Keywords: microwave-assisted solvothermal nanomaterial Tin oxide self-assembly gas sensitivity
CLC: TB383
Type: Master's thesis
Year: 2012
Downloads: 108
Quote: 0
Read: Download Dissertation
Abstract
|
Nanomaterials are attracting a great deal of attention due to their unique properties andwidely applications. Semiconductor oxides have excellent properties as important functionalmaterials and widely used in technological applications. As an n-type semiconductor with awide band gap, tin oxide is well-known for its potential applications in optoelectronic devices,electrochemical energy stroge for lithium ion batteries, catalysis, transistors, and especially ingas sensors. Material experts have been trying to research and develop SnO2nanomaterialwith good properties because of the potential development in these applications.It is well-known that the morphology, size, and structure of a specific material canstrongly influence the corresponding chemical, physical properties and its practicalapplications. Hence, in this paper, we used affordable SnCl4·5H2O, SnCl2·2H2O, urea andcitric acid as raw materials and by microwave-assisted solvothermal method to doexperiments, finally obtained SnO2nanomaterials with different morphologies and nano-size,the complex of CeO2/SnO2. The productions were characterized by XRD, SEM, FTIR and TG,and the gas sensitibities of these productions were measured. There are four parts in thispaper:First, when using SnCl4·5H2O as mother salt, SnO2nanomaterials were obtained throughadding different surfactants and tuning microwave reaction parameters, futhermore, theself-assembly process of SnO2nanomaterials was also discussed. The results show that, citricacid can coordinate with tin oins and slow down the hydrolysis of solution. Well dispersed tinoxide with20nm in diameter was obtained. Microspheres were formed from nanoparticlesthrough self-assemble process with increasing the microwave hydeothermal temperature.Second, when using SnCl2·2H2O as mother salt, SnO2nanomaterials were obtainedthrough adding different surfactants, tuning microwave reaction parameters, and theconcentration of citric acid and urea. It was also discussed that their effects on the phasestructures and morphologies of products as well as the forming mechanism of precursors andtin oxide. The results show that citric acid can not coordinate with Sn2+, and the complex agentis urea, citric acid acts as soft template and dispersing agent in the synthesizing process. Theprecursors were oxidized into SnO2after being calcined at700℃. The resultant SnO2can preserve their original shapes of precursors after calcination. With the increasment of thesolvothermal tempreature, rhomb-like plates change into3D network hierarchical structurewhich changes with the hydrothermal temperature and concentration of citric acid and urea.Third, CeO2/SnO2nanocomposite materials were obtained using in-situ synthesis method.The grains are6nm-20nm in diameter. When the ration of tin and cerium is1:1, the obtainedgrain size of compound is only6nm.Fourth, the SnO2thick film gas sensors were fabricated by the traditional preparationprocess of thick film, and using static prepared gas method to detect the alcohol sensitivity.The results show that, there is an optimum working temperature, at this tempreature, thesensor has the best activity and shows the highest sensitivity, this temprature is300℃. Thesample with3D network structure has the best alcohol sensitivity among the samples. It isattributed to the novel hierarchical structure. The hierarchical microspheres result in theformation of3D network, which consists of interconnected SnO2nanoplatelets andinterconnected voids. The former can improve interconnection of nanosized components andhence shorten the transfer of electrons or signals. The latter is favorable for the target gastransportation and accessibility.
|
Related Dissertations
- Containing pyrazoline chromophore small molecule and polymer synthesis and fluorescent properties of,O631.3
- Based magnetic fluid assembled hollow magnetic carbon microspheres and functional complexes,TB383.4
- Substituted phthalocyanine synthesis and molecular self-assembly behavior,O621.3
- Fabrication and Electrochemistry of Two-dimensional Ordered SiO2 Cavities on Electrode Surfaces,O613.72
- The Study of the Self-assembly Behaviors of Some Chiral Molecules with Fluorocarbon Chains,O621.3
- Synthesis and Characterization of Polyaniline Micro/nano Structure and Its Composites,TB383.1
- The Process of Cysteine Self-assembly on Gold Nanoparticle Modified Electrodes and Their Application,TB383.1
- Synthesis and Characterization of Main Chain Supramolecular Liquid Crystals Through Intermolecular Hydrogen-bonding,O753.2
- Synthesis and Self-assembly of Dendrimer and Their In-situ Modification of PMMA,O631.3
- Fabrication and Property of Films Based on Polyoxometalates and Dyes,O611.3
- Synthesis and Optoelectrical Properties of Organic/inorganic Hybrid Perovskite (RNH3)2(CH3NH3)n-1MnX3n+1,O627
- The Impact of Annealing Way on Properties of Red Phos-phorescent Nanomaterials Applied for Bio-imaging,TB383.1
- Synthesis and Self-assembly of Amphiphilic (Fluoro-)Siloxane Graft Copolymers,O631.3
- Study on the Physical Strength of the Change and Improvement in OCC Recycled Processing,TS71
- Template-free Synthesis and Properties of Polyaniline Nanostructures,TB383.1
- Preparation of Monodisperse Polystyrene Nanospheres in Confined Space,TQ325.2
- Electro-assisted Self-assembly and Properties of Silica Films,TB383.2
- Synthesis and Morphology Control of Tin Oxide,O614.432
- The Preparation and Performance of Funcational Materials Based on Polymer,TB34
- Research on Combinatorial Optimization Problem Based on DNA Self-Assemble,TP399-C8
- Directed Self-assembled Homogenous Nanosuspensions Improve the Oral Bioavailability of Insoluble Probucol,R96
CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net Mobile
|