Dissertation > Excellent graduate degree dissertation topics show

Study of Zone Model on Regenerative Reheating Furnace

Author: HeJinLong
Tutor: ChenHaiGeng; LiGuoJun
School: Northeastern University
Course: Thermal Power Engineering
Keywords: regenerative reheating furnace zone method simple iterative method operation parameter
CLC: TG307
Type: Master's thesis
Year: 2010
Downloads: 34
Quote: 0
Read: Download Dissertation

Abstract


In this paper, with the1750mm hot-strip walking beam furnace in Tianjin Iron Metallurgy Group Co., Ltd as the object of study, three-dimensional zone mathematic model can be established based upon energy balance of furnace gas, furnace wall and slab. Using simple iterative method to solve the dynamic energy balance equations, the temperature field can be obtained in the regenerative reheating furnace. The temperature field of furnace wall and slab can be solved by element balance method and finite difference method considering furnace gas as a coupled boundary condition.The effects of thermo-technical parameters and operation parameters which include cold-charging and hot-charging, calorific value of fuel, regenerative temperature, coefficient of air consumption, the fuel distribution along width and heigth direction of regenerative reheating furnace, and the switching mode on thermal process of regenerative reheating furnace can be analyzed detailedly in this paper. Simulation results indicate that specific fuel consumption can be reduced by enhancing the temperature of slab entering the furnace, calorific value of fuel or regenerative temperature when the output remains the same, and when the fuel supplies remain the same, the productivity of regenerative reheating furnace can be raised by enhancing the temperature of slab entering the furnace, calorific value of fuel or regenerative temperature, and that on the foundation of perfect combustion of fuel, furnace gas temperature and slab temperature can be raised by increasing coefficient of air consumption, and that the fuel distribution has a significant impact on furnace gas temperature and slab temperature along width and heigth direction of regenerative reheating furnace, and that switching mode has a little effect on furnace gas temperature and slab temperature.

Related Dissertations

  1. Simulation and Influent Based Operation Parameter Optimization of Dadukou WWTP at Chongqing, China,X703
  2. The Design and Implementation of Combustion Control System for Regenerative Walking-beam Furnace,TP273
  3. Design and Application Study of Instrument Control System for Dual Regenerative Walking-beam Reheating Furnace,TM924
  4. The Influence of Operation Parameter and Scale-up on Coal Gasification Process of Integrated Gasifier,TQ546
  5. Study on the Parameter Optimization of Ball Mills Based on the Technology of Distinct Element Method,TD453
  6. Research on Structural Optimization Design and Performance of Dynamic Hydrocyclone,TE977
  7. The Research and Development of Parameters Monitoring Device for Distributed Generation Connecting Electric Grid,TP274.4
  8. A Research of Practical Method about Power Transformer Economic Operation,TM406
  9. Study on the Treatment of Coke-Oven Wastewater with the ASBR-SBR Two-Stage SBR Technology,X784
  10. Application Study on Optimized Control of Operating Parameter of Electrostatic Precipitator,TM621.73
  11. Thermal Hazard Analysis of Sulphonation Process of Toluene,TQ202
  12. Study of Fabricated Rice and Systematic Model on Twin-screw Extruder,TS210.4
  13. The Research of Intelligent Optimization Methods in Oilfield Water Injection System,TE934.1
  14. Study on the Analysis Method of Structure with Transfer Story Considering Beam-Column Node Rigid Zones,TU973.2
  15. Surface-Wave Finite-Frequency Tomography Theory and Its Application,P631.4
  16. The Elastic-Plastic Stability Analysis of Single Story Frame of Steel Structure,TU391
  17. Thermocapillary Flow and Convection Control by Magnetic Field in Liquid Bridge under Microgravity,O361
  18. Study on Single Crystal Growth of Colossal Magnetoresistance La2-2xSr1+2xMn2O7 by Floating Zone Method and Characteristic,O782
  19. Growth and Characterization of A:Al2O3(A=Cr, Fe, Ni) Single Crystals by the Optical Floating Zone Method,O782
  20. Research on the Mathematical Models for Six Evaluating Form and Position Errors,TG83
  21. Research on Filtering and Evaluation Methods in Precision Measurement of form Error,TG806

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > General issues > Heating and heating equipment
© 2012 www.DissertationTopic.Net  Mobile