Dissertation > Excellent graduate degree dissertation topics show

The Design and Research of Pilot Type Zero Steady-state Error of Water Hydraulic Pressure Reducing Valve

Author: ZhangYiBo
Tutor: YuanRuiBo
School: Kunming University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: Pure water hydraulic transmission Pilot type hydraulic pressure reducingvalve Steady-state error Analysis of flow field The static and dynamic characteristic
CLC: TH137.5
Type: Master's thesis
Year: 2013
Downloads: 1
Quote: 0
Read: Download Dissertation


Hydraulic transmission, which has many outstanding advantages such as utilizing green energy, environment protection, safety&reliability and lower-cost&abundance etc, will become to a main developing direction in the field of fluid power transmission&controlling in future. The pressure value, as one of the key component in Hydraulic Transmission, is particularly important for researching of it’s higher performance. But the pressure value do have some negative features, for example, the static-state error, with the impact of high vapor pressure, the low viscosity and the small compressibility of water, the pressure value will easily come up with produce cavitation erosion and wire drawing because of the significantly increased fluid power and friction. Those appearances would seriously affect the performance of the pressure value and its life cycle. Therefore, to eliminate static-state error of the valve becomes one of the problems in improving the regulating accuracy of hydraulic pressure valve.This paper first introduced the hydraulic transmission and pressure valve of the development process, present situation and research at home and abroad, defines the static-state error, illustrates the generation mechanism and reveals its essence. By analysing of static-state error in the hydraulic control system it sums up the harm of the static-state error, followed with indicating the difficulties in eliminating of static error, and giving up the key technology against those difficulties which provides the theoretical guidance in the design of static water pressure reducing valve. Then, on the basis of experiences in designing of the hydraulic valve control, this paper designs a new type of static water pressure reducing valve with a special structure which can complete the internal dynamic pressure feedback of the valve. According to the design index, it designs&calculates the basic parameters of the valve structure. Further more, it selects based on the particularity of virous types of material which are utilized in water pressure control valve. The SolidWorks Flow Simulation model is also been used in simulation based analysis of the pilot no static water pressure reducing valve for flow field in order to validate the rationality of this structure.Finally, this paper establishes the pilot with no static and dynamic mathematical model of water pressure, and analyses the static and dynamic characteristics by using MATLAB simulation, which provides the static pressure characteristic curve, static pressure flow curve. It comes up with a result that this valve has good static pressure, and high precision pressure regulator. Based on static calculation formula, the valve static error remains lower than0.3%, which keep within the requirement of design indexes. The simulation results prove that the valve takes up a stable outlet pressure in the step response with a time interval of about2seconds, it gets the amplitude frequency, which is at4.8Hz.

Related Dissertations

  1. Analysis and Simulation of Static and Dynamic Characteristic for Electromangetic Mechanism of DC Contactor,TM572.1
  2. Aircraft active stick control system and its implementation,V249.1
  3. Study of Active Power Filter by Improved Repetitive Control,TM761
  4. Static and Dynamic Characteristics of Cab Air Suspension of Commercial Vehicle,U463.33
  5. The Study of Electro Magnetic Force Driving Actuator of Circuit Breaker,TM561
  6. The Research for Static and Dynamic Character Finite Element Analysis of Connecting Rod,TK401
  7. Viscous clutch governor Development and experimental and simulation,TH133.4
  8. Static and Dynamic Response Analysis of Frame by Finite Element Method,U463.32
  9. Property Analysis and Study on Computer Simulation of the Offset Inking System,TS825
  10. Design and Research on the Hydraulic Cutting System for High-Speed Steel Bar Cutter,TG333.21
  11. Smart antenna based LMS algorithm research,TN821.91
  12. Finite Element-Based Ultrasound Images Analysis,TP391.41
  13. The Research on of Controlling Queue of Routers Based on Differential Equation Traffic Model,TP393.02
  14. Medium-sized electro-hydraulic conversion element characteristics of strong complex,TK730.41
  16. Research and Simulation on the Static and Dynamic Characteristics of Turbine Liquid Fuel Metering Valve,TH814.2
  17. Diversity Techniques Based Blind Equalization Algorithm and Simulation,TN911.5
  18. Design and Analysis of Dynamic and Static Characteristics for High-Speed Motorized Spindle System,TG659
  19. The 3D Numerical Simulation of the Flow Field and Experiment Study on High-pressure Water Descaling Nozzle,TG335.11
  20. Theoretical and Theory Research on Single-Loop Planetary Transmission,TH132.425

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Hydraulic transmission > Hydraulic components
© 2012 www.DissertationTopic.Net  Mobile