Dissertation > Excellent graduate degree dissertation topics show

Vehicle Stability Research During Curved Brake Based on Abs

Author: LiJun
Tutor: ZhangWeiQiang
School: Nanjing Agricultural College
Course: Vehicle Engineering
Keywords: Curved Brake Expected Slip Fuzzy Logic Control ABS
CLC: U463.526
Type: Master's thesis
Year: 2010
Downloads: 51
Quote: 0
Read: Download Dissertation

Abstract


Brake stability is one of key and important criterion for vehicle brake quality. Curved brake,different from straight line brake, will cause vehicle oversteer or understeer even spin for the reason of load transferred. Based on ABS, this paper focused on the vehicle stability when curved brake.First, by introduction of tyre coordinate,tyre model and brake actuator model, an eight degrees of freedom of vehicle dynamic model has been established. These eight degrees were longitudinal motion, lateral motion, yaw movement, roll movement and turn movement of four wheels. Meanwhile this paper analyzed the calculation of wheel lateral deviation angel and load transfer.Second, the eight degrees of freedom of vehicle dynamic model has been simulated in this paper by using Matlab/Simulink. Then the reason of vehicle unstable when curved brake was analyzed and the way to improve the stability has been told which was differential brake by changing front and rear wheel slip.Third, a function for optimization which is under consideration of both brake efficiency and lateral stability has been built up, then by using PSO the slips of front and rear wheel were optimized.Then, the disadvantage of traditional ABS based on threshold is analyzed. A new control model, fuzzy logic control, for ABS is designed in Matlab Fuzzy Logic Controller and the controller is simulated in Matlab. The slip and the changing ratio of slip are the principle for designing the new ABS controller. The simulated results prove the efficiency of the new ABS controller.At last, the eight degrees of freedom vehicle dynamic model and the ABS fuzzy logic controller is combined together for simulation. Two working conditions, high mue road and low mue road, are simulated with certain inputs. Also, the simulated results proved the efficiency of the new ABS controller in cured brake and the simulated results also proved the expected slip that optimized before are right.

Related Dissertations

  1. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  2. The Detection and Research of Serum p53 Antibodies in Cancer Patients and Check-up Population with ELISA Method,R730.4
  3. Research and Simulated Vehicle Stability Control on Turning and Braking Maneuvers,U463.5
  4. Company CSN Sensor Marketing Strategy Study,F426.6
  5. ABS Slurry Dehydration Process Optimization,TQ325.2
  6. Preparation and Properties Study of PC/Bulk ABS Alloys,TQ325.2
  7. The Development and Research of ABS Test Bench Based on Virtual Instrument,U463.526
  8. A Research of DC-DC Converter by Fuzzy Variable Structure Common Model Adaptive Control Methods,TP273
  9. Simulation Analysis of Integrated Control System of Vehicle Chassis,U463.1
  10. An Improvement Protocol of WLAN MAC Based on Fuzzy Logic Control,TN925.93
  11. A novel organic-inorganic hybrid mesoporous materials synthesis and for PC / ABS flame retardant research,TB33
  12. Chassis Electronic Control Unit and System Integration Technology Based on BUS,U463.1
  13. Research on Rare Earth Doping and Modifying Plastic,TQ320.7
  14. Processing technology and flame retardant properties of PC / ABS Blends,TQ325.2
  15. Development and Production of Heat-resistant Special-purpose ABS Resin,TQ325.2
  16. Research on the Dynamic Characteristics of High Speed Solenoid Valve for ABS,U463.526
  17. The Study of Financing Pattern of ABS on Public Rental Housing in China,F293.3
  18. Polycarbonate reaction with anhydride groups Capability,TQ320.1
  19. The structure and properties of ABS resin,TQ325.2
  20. Study on Simulation of Brushless Double-fed Wind Generator Control System,TM315
  21. The Research of MPPT Control in Grid-connected PV System Based on Soft Switching Technique,TM615

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Braking system > Brake control device > Anti-lock brake
© 2012 www.DissertationTopic.Net  Mobile