Dissertation > Excellent graduate degree dissertation topics show

Research on Behaviour of Concrete Filled Double-skin Steel Tubular Columns Subjected to Pure Torsion

Author: HuangBinJie
Tutor: HuangHong
School: East China Jiaotong University
Course: Structural Engineering
Keywords: double-skin concrete filled steel tubes pure torsion experiment finite elementanalysis
CLC: TU398.9
Type: Master's thesis
Year: 2012
Downloads: 52
Quote: 0
Read: Download Dissertation

Abstract


Concrete filled double-skin steel tubular (CFDST) is a new type of composite structurefilled with concrete between two concentric steel tubes. It can offer many advantages, such ashigh bearing capacity, good plasticity and malleability, convenient construction, high fireresistance, high bending rigidity, light deadweight. The cross-section of the outer and innersteel tube are various, such as circle, square, rectangle and some others. One kind of CFDSTsection tubes was studied in this paper, that is, the outer steel tubes are circular hollowsections (CHS), while the inner steel tubes are CHS.The pure torsional behavior of concrete filled double-skin steel tubular columns is thebasis of the behaviour of CFDST subject to compression-torsion, bending-torsion,compression-bending-torsion and compression-bending-shearing. Behaviour and mechanismof concrete-filled double-skin steel tubular columns were investigated in this paper includingexperimental and theoretical studies. Through the parametric analysis, the practicalcalculation methods for pure torsional capacity were developed.The main achievements were summarized in detail as follows:(1) The relevant researches were reviewed firstly. The finite element method and testprogram were selected for the behaviour analysis of concrete filled double-skin steel tubularcolumns subjected to pure torsion.(2) Six concrete filled double-skin steel tubular columns and one double hollow tubeswere tested under pure torsion. The primary parameters in the tests were nominal steel ratioand hollow section ratio, and the phenomena and data of the tests were analysed in detail.(3) Torque-angle relationship curves of concrete filled double-skin steel tubular columnssubjected to pure torsion were analyzed by finite element software ABAQUS. The numericalresults are compared with the experimental results. The calculated results were in goodagreement with experimental data, the reliability of finite element model was verified. Workmechanism on the composite columns was analyzed at three aspects: Failure modes of thecomposites, stress distributions of steel and concrete and interactions between steel andconcrete.(4) Based on the finite element method, parametric analysis was performed on thebehaviors of Torque-angle relationships for the composite columns. The selected parameterswere the nominal steel ratio, the inner and outer tubes yield strength, hollow section ratio,concret compression strength, etc. Finally, practical calculation methods for pure torsionalcapacity were put forward, which can serve the engineering design.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  4. The Design and Accomplishment of Simulition Platform for Voltage Clamp Experiment Based on Cell Electrophysiological Model,R318.0
  5. The Current Situation and Countermeasure Research on Guangzhou High School Students’ Interests in Biology Experiment,G633.91
  6. Differences in the Productivity and Stress Resistance of Double Rice Cropping System between Different Fertilization Regimes in Jiangxi Province,S511.42
  7. The Research of Ian Hacking’s Thoughts on the New Experimentalism,N02
  8. Study of Smoke Flow of Enclosed Space Fire with Horizontal Openings,X928.7
  9. Study on the Design of Magnetic Drum Planting Machine for Tobacco,S223.2
  10. Development of Small Mobile Cyclic Drying Machinery,S226.6
  11. The Study on the Detection Technologies and Equipment of Flue-cured Tobacco Leaves Physical Performance Parameters,S572
  12. Effects of Long-Term Green Manure Application on the Productivity and Stress Resistence of Double Rice Cropping System in Jiangxi Province,S511.42
  13. Identification of New Protective Antigens of Streptococcus Equi SSP. Zooepidemicus,S855.11
  14. Monitoring of Degaradation of CP4-EPSPS Protein, Endogenous and Exogenous Gene in Roundup Ready Soybean during Food Processing,S565.1
  15. Action Research on "Unconventional" Experiments Improving the Effectiveness of Physics Concept Teaching in Junior High School,G633.7
  16. Study on the Extracting Technology of Polygonatum Polysaccharides and Preparation of the Polygonatum Sibiricum Yoghurt,TQ461
  17. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  18. Theoretical Analysis and Experiment Study on Maize Pair Seeds Thresher,S226.1
  19. Studies on the Quality Standard of Brassica Rapa L.,R284.1
  20. Motivation types on the basis of the quality of teaching soccer in rats,G843-4
  21. Domestic isoflurane inhalation anesthesia effect depends on learning and memory in adult rats related research,R965

CLC: > Industrial Technology > Building Science > Building structure > Composite structure > Other composite structures
© 2012 www.DissertationTopic.Net  Mobile