Dissertation > Excellent graduate degree dissertation topics show

Research on Concrete Filled Double-skin Steel Tubular Columns Subjected to Compression Bending Torsion

Author: FanZhiJie
Tutor: HuangHong
School: East China Jiaotong University
Course: Structural Engineering
Keywords: double-skin concrete filled steel tubes pure torsion experiment finite elementanalysis correlation equation
CLC: TU398.9
Type: Master's thesis
Year: 2013
Downloads: 8
Quote: 0
Read: Download Dissertation

Abstract


Concrete filled double-skin steel tubular (CFDST) is a new type of composite structurefilled with concrete between two concentric steel tubes. It can offer many advantages, such ashigh bearing capacity, good plasticity and malleability, convenient construction, high fireresistance, high bending rigidity, light deadweight. The cross-section of the outer and innersteel tube are various, such as circle, square, rectangle and some others. One kind of CFDSTsection tubes was studied in this paper, that is, the outer steel tubes are circular hollowsections (CHS), while the inner steel tubes are CHS.The compression torsional and compression bending torsion behavior of concrete filleddouble-skin steel tubular columns is the basis of the behaviour of CFDST subject tocompression-torsion, compression-bending-torsion, and compression-bending-shearing.Behaviour and mechanism of concrete-filled double-skin steel tubular columns wereinvestigated in this paper including experimental and theoretical studies. Through theparametric analysis, the practical calculation methods for compression torsional andcompression bending torsion capacity were developed.The main achievements were summarized in detail as follows:(1) The relevant researches were reviewed firstly. The finite element method and testprogram were selected for the behaviour analysis of concrete filled double-skin steel tubularcolumns subjected to compression torsion and compression bending torsion.(2) Seven concrete filled double-skin steel tubular columns and two soild steel pipeconcrete were tested under compression torsion and compression bending torsion. Theprimary parameters in the tests were axial compression ration and slenderness ratio, and thephenomena and data of the tests were analysed.(3) Torque-angle relationship curves of concrete filled double-skin steel tubular columnssubjected to compression torsion and compression bending torsion were analyzed by finiteelement software ABAQUS. The numerical results are compared with the experimentalresults. The calculated results were in good agreement with experimental data, the reliabilityof finite element model was verified. Work mechanism on the composite columns wasanalyzed at three aspects: Failure modes of the composites, stress distributions of steel andconcrete and interactions between steel and concrete.(4) Based on the finite element method, parametric analysis was performed on thebehaviors of Torque-angle relationships for the compression torsion columns. The selectedparameters were the nominal steel ratio, the inner and outer tubes yield strength, hollow section ratio, concret compression strength,slenderness ratio, etc. Finally, practical calculationmethods for compressin torsional capacity were put forward, which can serve the engineeringdesign.(5) Based on the finite element method was performed on the behaviors of Torque-anglerelationships for the compression bending torsion columns. a large amount of circle hollowcompression bending torsion columns are calculated and analyzed, and the reference circle ofsolid concrete filled steel tube compression bending torsion correlation equation. Finally,practical calculation methods for compressin bending torsional correlation equation were putforward.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  4. Study on the Extracting Technology of Polygonatum Polysaccharides and Preparation of the Polygonatum Sibiricum Yoghurt,TQ461
  5. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  6. Theoretical Analysis and Experiment Study on Maize Pair Seeds Thresher,S226.1
  7. Studies on the Quality Standard of Brassica Rapa L.,R284.1
  8. Motivation types on the basis of the quality of teaching soccer in rats,G843-4
  9. Domestic isoflurane inhalation anesthesia effect depends on learning and memory in adult rats related research,R965
  10. Guide the process of deceleration spin dynamics analysis sensitivity Projectile,TJ410
  11. Research of Innovative Forms of Books,J524
  12. Modelling and Development of Simulation Software of Rolling Mill Bending Roller Control System,TG334.9
  13. Junior Middle School Chemistry Experiment Adaptive Learning System Model to Study the Learning Style,G633.8
  14. The Research of Virtual Physics Experiment Operation Evaluation System,TP311.52
  15. The Design and Implementation of Virtual Experiment of the Chemical Liquid and Metal Reaction Based on OpenGL,TP311.52
  16. Optimum Design and Test Research of Low-specific-speed Pump with Complex Impeller,TH311
  17. The Contrast Test of the Suitability of New Varieties of Flue-cured Tobacco in Tengchong, Baoshan,S572
  18. Construst Accounting Course Simulation Teaching Method on the Basis of Higher Vocational,F230-4
  19. The Input Way of Methylmercury on Hibernating Rana Chensinensis and the Preliminary Study of the Level of DNA Methylation,X174
  20. Research on DEM-Simulation in Vibration Screening Process,TD921.3
  21. Study on Subsoil Settlement and Numerical Simulation of Eolian in West LiaoNing,U213.1

CLC: > Industrial Technology > Building Science > Building structure > Composite structure > Other composite structures
© 2012 www.DissertationTopic.Net  Mobile