Dissertation > Excellent graduate degree dissertation topics show

Based on the ANSYS in Two Kinds of Modeling Method of Grid Structure Stress Analysis

Author: CuiZuo
Tutor: LiTieYing
School: Taiyuan University of Technology
Course: Architecture and Civil Engineering
Keywords: Space grid structure Finite element model ANSYS Staticanalysis Seismic load
CLC: TU356
Type: Master's thesis
Year: 2012
Downloads: 160
Quote: 0
Read: Download Dissertation

Abstract


With the development of reform and opening-up, great process has been made in China’s architecture. Especially by the increasing of steel production year by year, steel have been widely used in large-scale civil engineering of tall buildings. As the most representative system in the steel, space grid structure has a pivotal position in the large buildings at home and abroad, resulting in great concerne of a number of structural engineers and steel experts’space grid structure design. Many experts and scholars after years of unremitting efforts, assisted by the data obtained from the large number of experiments and practical engineering, and with the help of computer and other advanced technology, developed analytical methods and computing theory of the space grid structure have included in the Building Code. This paper targeted for the models built in ANSYS software, due to the different type of the selected elements, comparative analyze deflection change and leverage internal force under different loads change.In this paper, the main conlusions are the four parts as follows:First, according to the basic principles of the finite element theory, in the large-scale analysis ANSYS software, we choose different type of elements to create two models, and with a brief introduction on ANSYS analysis principles and the modeling process, have the stress analysis and comparing between two models, which the element of LINK8is used to simulate the element of pole and the element of BEAM44is used to simulate the element of beam.Second, according to the principle of statics analysis in the structural mechanicse, we should compare in the established micro-model, and then analysis of difference the two models in the static, which include analysis under the weight load, analysis under the concentrated force load, comparison between snow load and wind load. Particularly, the grid of the deflection and rod internal force, through the data and the comparison line chart, a very intuitive response of the two models by the outside world could be seen. It also can provide some experimental basis for the analysis of network structure in the different unit types.Third, describe ANSYS modal analysis algorithm of the free vibration frequency of space grid structure, and example conditions of different algorithm. Through analyzing the natural frequency of the two kinds of space grid structure, we can get the influence of element type and node processing to the space grid structure itself.Finally, according to the principle of transient dynamics, research on the seismic response of two models, enter the EL-Centro wave to analyze seismic load on the two models, and compare the maximum relative displacement and internal forcechanged under the two different element models under the seismic waves.

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  4. Research on a Fire-fighting Shell for Towers,TU892
  5. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  6. FEA Analysis for Contact Roller of Sanding Machine,TS64
  7. The Analysis Research and Design of Backstop Roller Based on Virtual Prototype Technology,TH222
  8. The Plastic Sheet Surface Spraying Technology’s Exploit Research,TQ320.67
  9. Research and Manufacture of SZL1000/300 Hydraulic Support Test-Bed,TD355.4
  10. A Ribbon Cage Separated Automatically Technology Research,TH133.3
  11. Dynamics Simulation and Finite Element Anslysis of the Loader Working Device,TH243
  12. The Structure Analysis and Optimization of Casey Green Laser Emission Dishes Support Bracket,TH743
  13. The Influence of Frame Structure Local Column Failure on Overall Performance,TU375.4
  14. Research of Wear-resistant and Finite Element Analysis of ADI for Track Rollers,TG156.3
  15. Bearing Capacity of Cast-in-place Piles in the Karst Region of Yichun, Jiangxi,U213.1
  16. Analysis of Seismic Behaviour of Mega Frame-Tube Structure Based on ANSYS,TU352.11
  17. Parametric Finite Element Analysis System Development of the Jib of Tower Crane Based on ANSYS,TH213.3
  18. Dynamic Simulation and Force Analysis of Human Knee Joint,R318.01
  19. Research of a New Integrated Printing, Drying and Sticking Films’ Machine,TS851
  20. The Design of the Interferometric Fiber-optic Microphone System Based on 3X3 Coupler,TN912.2
  21. Dynamic Response and Reliability Analysis of Bus Body,U463.82

CLC: > Industrial Technology > Building Science > Building structure > Special Structure > Network structure
© 2012 www.DissertationTopic.Net  Mobile