Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Heat and Moisture Transfer under High Temperature Based on FLUENT

Author: MaFeng
Tutor: WangEnYu
School: Hebei University of Technology
Course: Thermal Power Engineering
Keywords: two-dimensional axisymmetric heat and moisture migration high-temperature FlUENT
CLC: TK124
Type: Master's thesis
Year: 2012
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Reference the previous two-dimensional axisymmetric model concept,thispaper establish the mode which regard the temperature gradient, soil waterpotential,and gravity as the driving force to drive heat and moisture migration.Themodel is suitable for the high-temperature heat and moisture migration. In theory, themigration of moisture is subdivided into migration under a temperature gradient andthe migration under the soil water potential, the migration of energy is also dividedinto thermal migration with thermal conductivity and thermal migration with themigration of liquid water.Summarize the empirical formula of previous heat and moisture migrationmodel, we have obtained the empirical formula of hydraulic conductivity coefficientsuch as water conductivity coefficient under temperature gradient, vaporconductivity coefficient under temperature gradient, and water conductivitycoefficient under the soil water potential.In this paper, on the cylindrical heat and moisture migration test bench, we havecompleted the low moisture content (volumetric moisture content3.5%) in soil high-temperature(80℃) heat and moisture migration experiment.The paper useexperimental results to verify the two-dimensional axisymmetrical heat and moisturetransfer model, and found that the temperature and humidity field changing trend isconsistent with the reality, the key phenomenon is obvious, it proves that thenumerical values are similar to high temperature heat and moisture transfer beforethe accuracy of that mechanism. This confirms that the speculation is correct before.In the initial volumetric moisture content of8%(80℃heat removal)conditions, this paper compares the results of the calculations of the model withpure heat conduction model, and found that the heat and moisture migration is notconducive to the heat removal of heat source.The paper select different initialvolumetric moisture conditions and different heat rejection temperature conditions tocalculated and contrast the moisture and temperature field by the new model. For theinitial moisture content of the unsaturated soil which is less than15%, the higher theinitial volumetric moisture content is, the faster the remove heat rate of thecorresponded drastic change stage. But the effect is gradually reduced in the slowlyvarying stage.The higher the temperature of the heat source is, the faster reduce ofthe remove heat rate.

Related Dissertations

  1. Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
  2. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  3. Photosynthetic Apparatus Response to Heat Stress and the Mechanisms in Two Different Cotton with Various Leaf Colours,Q945.11
  4. Construction and Primary Analysis of Differentially Expressed cDNA Library of Alfalfa by Using Suppression Subtractive Hybridization under the High Temperature,S541.9
  5. Study on Agrobacterium-Mediated Transformation of ’Benihonpe’ Strawberry with ALA Synthase Gene,S668.4
  6. Comprehensiv Evaluation of the Tolerance of Sweet Cherry Drafted on Five Different Rootstocks under Drought, Waterlogging and High-Temperature Stress by Subordinate Function Values Analysis,S662.5
  7. Study on Growth and Physiological Metabolism of Tomato Seedlings under High Temperature Stress,S641.2
  8. The Study of Goaf’s Flow Field and Gas Distribution Rules Base on Fluent,TD712
  9. Preparation and Characterization of Luminescent Materials BaWO4:Eu3+,TB383
  10. Research of High-temperature Alloy Machining Simulation Technologies,TG506
  11. Analysis and Control of Flow Field in Coat-hanger Foamed Sheet Die,TQ320.52
  12. Preparation and Properties of ZAO Target,TB383.1
  13. Hongyuan Coal Mine Methane Emission Forecast and Prevention Research,TD712
  14. Method and Theory about Defect Detection of Empty Tube Detonators Made in Metal,TQ565.2
  15. Hydraulic Support with Double-unload Protection Safety Valve Characteristic Simulation and Experimental Research on the System,TH137.52
  16. Three-dimensional Stimulation about Outflow Coefficient of the V-Cone Flow Meter,TH814
  17. Numerical Simulation of Fluid Field and Temperature Field Within the Breaking Rotary Dryer,TK173
  18. Research on Gas Drainage Techonlogy Form Goaf of High Gas and Thick Coal Seam,TD712
  19. The Performance Analysis and Improvement of the Core Parts of Ground Source Heat Pump,TK523
  20. Study of Crystallization Process of Magnesium Hydroxide,TQ132.2
  21. Preparation and Properties of High Temperature Tolerance Microemulsified Acid,TE39

CLC: > Industrial Technology > Energy and Power Engineering > Thermal engineering, heat > Thermal Engineering Theory > Heat Transfer
© 2012 www.DissertationTopic.Net  Mobile