Dissertation > Excellent graduate degree dissertation topics show

Design and Control of a Novel Bearlingless Switched Reluctance Motor with Double Stator

Author: PengZuo
Tutor: ZhangFengGe; Ahn Jin-Woo
School: Shenyang University of Technology
Course: Motor and electrical
Keywords: double stator bearingless switched reluctance motor finite elementmethod motor design suspension control
CLC: TM352
Type: Master's thesis
Year: 2012
Downloads: 76
Quote: 0
Read: Download Dissertation

Abstract


Bearingless switched reluctance motor (BLSRM) is a new type of motor whichdeveloped on the basis of traditional switched reluctance motor (SRM). It not only hassuperior performance of SRM, but also has a good feature of bearingless motors, such asno abrasion and no friction. It will be widely used in high speed motor, aerospace and soon. BLSRM have two kinds of stator windings composed of motor main windings andradial force windings in the same stator in order to produce the radial force that can realizerotor shaft suspension. However, the radial force of BLSRM is coupled with the rotationaltorque, and the control of radial force is very difficult.In this paper, a novel BLSRM with double stator is proposed. Inside stator generatesradial force to suspend the rotor. Outside stator produces rotational torque. Compared withthe previous BLSRM, decoupling control between torque and radial force can be realizedin double stator BLSRM, at the same time, a wide and almost constant radial force can beachieved at any rotor position with a given current, so a simpler control algorithm ispossible to be applied to implement suspend the rotor.To verify the proposed structure, a novel structure and operating principle arepresented. Based on the existing work of previous researches for BLSRM, mathematicalmodels of the radial force in x-axis and y-axis direction are deduced. Through finiteelement method (FEM) analysis, the characteristics such as inductance, torque and radialforce profiles of two stator windings are analyzed with the cases of non-eccentric andeccentric rotor. From the analysis, the proposed BLSRM has linear characteristic of radialforce and independence from torque current, decoupling control between torque and radialforce can be realized. Meanwhile in order to realize steady suspension, control scheme ofdesired radial force is proposed. Some simulation results are shown to verify the validity ofcontrol strategy. The experiment system is constructed. From experiment results, it can beseen that the motor can operate steadily, the torque current has almost no effect on thesuspending force and the suspending force current also has almost no effect on the output torque, which further verifies the validity of the double stator BLSRM and its controlscheme.

Related Dissertations

  1. Consider the track vertical curve caused by the interference of suspended load control technology,U266.4
  2. Motor Design and Simulation of Charging and Discharging Control of Flywheel Energy Storagye System,TM919
  3. Double mechanical port permanent magnet motor design and analysis,TM351
  4. Research on Anti-Load Disturbance for Suspension System of EMS Maglev Train,U266.4
  5. Research on Permanent-magnet EDS＆EMS Hybrid Suspension System Based on Halbach Structure,U266.4
  6. Study on the Design and Magnetic Field’s Computation of Bearingless Switched Reluctance Motor,TM352
  7. Research and Design of Double-Stator Permanent Magnet Synchronous In-Wheel Motor,TM341
  8. Research on Noise and Its Reduction for Permanent Magnet Brushless DC Motor,TM351
  9. Design and Simulation of a Rotary-linear Permanent Magnet Motor,TM351
  10. Analysis of Double-Stators Motor with Triangle Slider,TH137.51
  11. Vibration Control of Rotor Eccentric for A Bearingless Switched Reluctance Motor,TM352
  12. Analysis of Trapezoidal Slider Double Stator Axial Motor,TH137.51
  13. Fuzzy Logic Compensation Inverse System Decoupling Control for Bearingless Switched Reluctance Motor,TM352
  14. Design and CAD System Exploitation for Combined Permanent Magnet Synchronous Motor,TM341
  15. The Design and Simulation Research of Permanent Magnet Brushless DC Motor by Finite Element Method,U260.13
  16. Research on High-Speed Digital Control System for Bearingless Switched Reluctance Motors,TM352
  17. Semi-Active Control of Lateral Suspension Systems for High Speed Railway Vehicle Based on GPC-PID,U270
  18. Research of Electromagnetic Suspension Control System Based on DSP for Vehicle,U266.4
  19. Dedicated permanent magnet synchronous generator and DC-DC regulator system,TM44
  20. CAD System of Rare Earth Permanent Brushless Direct Current Motor,TM351
  21. Investigation of Semi-Active Suspension for Locomotive Lateral Dynamic Performance,U260.11

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Reluctance motor
© 2012 www.DissertationTopic.Net  Mobile