Dissertation > Excellent graduate degree dissertation topics show

Preparation and Properties of lead-free glass powder

Author: ZhuHua
Tutor: GanGuoYou
School: Kunming University of Science and Technology
Course: Materials Science
Keywords: Lead-free glass powder Transition temperature Chemical stability conductivity Adhesion
CLC: TQ171.6
Type: Master's thesis
Year: 2011
Downloads: 38
Quote: 0
Read: Download Dissertation


Glass frits is the important component of silver paste, its nature directly affect the properties of silver membrane. Glass frits in traditional silver paste is lead glass frits, Lead glass frits which used for binding element have excellent properties in many aspects, but lead considerable damage to the environment and people, as people of environmental protection consciousness to strengthen and the major developed countries had to legislate law to ban use and production the silver paste of containing lead, therefore, it is imperative for the development and application glass frits of lead-free.This paper mainly studied the production of low melting point glass frits which use for silver paste and related properties of glass had been studied. Properties of low melting point glass frits had been studied which based Bi2O3-B2O3-SiO2 system and performance adjusting oxide of Li2O、MgO、NaF、TiO2 and ZnO added in this system, through differential thermal analysis, acid-proof and acid-alkaline testing, The effects of Li2O、MgO、NaF、TiO2and ZnO on the soften point and chemical stability of glass was studied in details. The effects of MgO、TiO2 and ZnO on thermal properties were being discussed. Some explanations about the effects of Li2O and NaF on the soften point and melting point of glass frits were given out. In conclusion, based on the experimental and theoretical analysis, the optimized composition of the glass frits was given out:quality percentage of B2O3 is 10% to 19%, SiO2 is 5% to 15%, Bi2O3 is 45% to 70%, Al2O3 is 2% to 8%, Li2O is 1% to 5% MgO is 1% to 6%, NaF is 1% to 3%, TiO2 is 1% to 5%, ZnO is 1% to 7%. By using this formulation, the low temperature and lead-free glass frits with soften point is 462℃was successfully prepared, This lead-free glass frits of acid-proof and acid-alkaline is good. The XRD pattern of this glass frits showed that lead-free frits has the glass typical amorphous structure and the performance of forming glass was very good and the range of extension was very wide. Differen-tial thermal analysis (DSC) studies show that lead-free glass frits is microcrystalline glass. In this paper, the mechanism of action and effects of the lead-free glass frits with silver paste on electric conductivity and the adhesion strength were studied. The silver paste with the lead-free glass frits suitable for sintering at 630℃and the best time for keeping this temperature is 6min. High sintering temperature and longer holding time will make the conductivity of silver film becoming poor. The silver paste with quality percentage of the lead-free glass frits at 5% and size at around 3μm can obtain higher electric conductivity and the adhesion strength.

Related Dissertations

  1. Research on Mud Density Measuring Method Using Ultrasonic,TE256.7
  2. The Influence of Magnetic Field Topology on Electron Motion in Hall Thrusters,V439.2
  3. Treatment effect and its mechanism of lactose derivatives Gu- 4 in endotoxin shock in mice,R459.7
  4. Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
  5. Adhesion Molecule P-selectin Expression in Gastric Cancer Peritoneal Metastasis,R735.2
  6. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  7. Studies on Behavior of Potato Grafted Starch,TS103.846.1
  8. Study on the Dynamic Thermal Test Device of Sprinklers,TU892
  9. An Analysis of Bacterium Adhesions on the Surface of Restorative Materials of RPDs in Vitro,R783.6
  10. PPARγ in endometrial epithelial cells and their functions preliminary study,R321
  11. LPS activation of complement on endothelial cells and the inhibition of complement on LPS- induced acute lung injury,R563.8
  12. α1, 3 fucosyl transferase Ⅳ (Fut4) upregulated increased metastatic potential of squamous cell scc12,R730.2
  13. Gastric CD11c integrin adhesion molecule expression and prognosis,R735.2
  14. Based on inorganic Heteropolyoxometallate - organic composite proton conductor design, synthesis and performance,O621.3
  15. Dai Shun Mine Collapse Column 4325 track characteristics and control technology research and development,TD745
  16. Growth of Single-walled Carbon Nanotube Arrays and the Study of Their Adhesion Force,TB383.1
  17. The Changes and the Clinical Significance of Serum Ischemia Modified Albumin, Soluble Intercellular Adhesion Molecule 1 and C-reactive Protein in Patients with Coronary Heart Disease,R541.4
  18. A Study on the Impact of Knowledge Stickiness and Organizational Social Capital on Knowledge Transfer of the Multinational Retail Enterprise,F721
  19. The Function Analysis of Ceramidase (CER) from Arabidopsis Thaliana,Q943
  20. Evaluation of Material Mechanical Properties by Small Punch Test at Low Temperatures,TG115.5

CLC: > Industrial Technology > Chemical Industry > Silicate > Glass Industry > Production process and equipment
© 2012 www.DissertationTopic.Net  Mobile