Dissertation > Excellent graduate degree dissertation topics show

Research on Microstructure Property and Production Technology of Hot Rolling of X65 Pipeline Steel

Author: SunJing
Tutor: FengYunLi
School: Hebei University of Technology
Course: Materials Processing Engineering
Keywords: X65 pipeline steel controlled rolling and controlled coolling microstructure properties
CLC: TG335.5
Type: Master's thesis
Year: 2008
Downloads: 100
Quote: 0
Read: Download Dissertation

Abstract


For long distance transportation used pipe steel, high ductility is the key to assure pipeline’s safty and cost reduce. Appropriate chemical combination is one of the methods that can improve final properties, and technology of rolling and cooling control is another effective method to improve properties.This paper makes X65 pipeline slab made by hot slab factory as research object, through thermal simulated test and lab rolling test, effects of technologic parameters of controlled rolling and controlled cooling on microstructure and properties are studied. With methods of microstructure control and refinement, X65 pipeline steel meets the national standard of properties.This article makes analysis of the effect of different technical conditions on microstructure and properties of X65 pipeline steel by simulated test. Analysis shows that during the period of rough rolling, smaller and more homogeneous austenit grain can be gained in five-pass rolling than three-pass rolling. Starting finish-rolling temperature should be controlled under 900℃. The much lower the finishing rolling temperature is, the smaller and more homogeneous the microstructure is. When finishing rolling temperature is 750℃, the grain is very small with continuous distributing of small particle and average grain size is about 4μm. Cooling rate after rolling should be controlled between 10℃/s and 15℃/s. Batching temperature has little effect on refinement of microstructure under the condition of 15℃/s or more.X65 pipeline steel has been practically simulated rolled after technologic parameter set, based on experimental results of thermal simulation. Microstructure and properties are analyzed which offer theoretical principles to establishing production technology of X65 pipeline steel in Tangshan Steel Co.Ltd. It shows that techniques with finishing rolling temperature of 810℃, cooling rate after rolling of 14℃/s and final cooling temperature of 535℃are perfect. X65 pipeline steel with superior properties can be obtained.Production technology is adjusted and X65 pipeline steel is testing rolled in 1700 production line in Tangshan Steel Co.Ltd. on the base of experimental results. Microstructure is ferrite and a little pearlite. Types of impurity are silicate and sulfuret. Mechanical properties of X65 pipeline steel are content to the national GB/T1591-94 standard. Finally, the perfect technologic scheme of X65 pipeline steel is obtained: finish-rolling temperature of 990℃, finishing rolling temperature of 822℃, cooling rate after rolling of 12℃/s, final cooling temperature of 608℃and rolled reduction of 29.8%, 34.4%, 27.8%, 16.4%, 13.1%, 7.3%. That provides theoretical and technical support for the realization of X65 even more higher grade production in Tangshan Steel Co.Ltd.

Related Dissertations

  1. A Research on Factors of the Establishment American Family Properties Decalaration System,D771.2
  2. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  3. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  4. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  5. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  6. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  7. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  8. Simulation and Experimental Study on the Scattering Properties of Two Dimensional Rough Surfaces,TP391.41
  9. Urothermal Synthesis, Structure and Characterization of Functional Coordination Polymers,O631.3
  10. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  11. Effects of Enzyme/Chemical Agents on Refining of Plant Fiber,TS713
  12. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  13. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  14. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  15. Flexible,rigid,Synthesis and characterization of mixed ligand complexes,O621.1
  16. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  17. Study on the Synthesis and Properties of Copolyimides Derived from ODPA/Isomeric ODA,TQ323.7
  18. Study on Application of Red Yeast Rice in Fermented Sausage,TS251.65
  19. Soil Eoclogical Risk Evaluation of Transgenic Bt Rice Through Nematode Community Analysis,S154.1
  20. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  21. Biochemical Characterization and Molecular Modification of a Novel Marine Mud-derived Pyrethroid Hydrolase,X172

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process > Sheet, strip,foil rolling
© 2012 www.DissertationTopic.Net  Mobile