Dissertation > Excellent graduate degree dissertation topics show

Performance of Rigid Composite Joints under Combination of Hogging Moment and Tensional Force

Author: ZhaoJinTao
Tutor: ZhangSuMei；GuoLanHui
School: Harbin Institute of Technology
Course: Structural Engineering
Keywords: composite joints rigid connection tensional force hogging moment load-carrying capacity
CLC: TU398.9
Type: Master's thesis
Year: 2011
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Composite beams are widely used in high-rise steel structures and steel-concrete composite structures. Compared with steel beams, it has the advantages, such as higher load-carrying capacity, higher stiffness, less height. The connections between composite beams and columns are seen as composite joints. As high-rise buildings are widely used, progressive collapse will lead to huge economic loss and evil social influence for high-rise buildings. Since the performance of progressive collapse resistance of structures and design methods have drawn great attention for engineers. If a key column fails, the loads on superstructures cannot be transferred by this failed column and the internal force is redistributed by the catenary action of joint to prevent the progressive collapse of structure. The joint is under the state of bending moment combined with tensional force which would affect the moment-resistance ability and ductility of joints. This paper presents the experimental and theoretical study on composite joints under the state of hogging moment and tensional force. The main contents are as follows:(1) The tests of rigid composite joints are carried out in order to study its mechanical properties under hogging moment combined with tensional force. The stiffnesses, load-carrying capacities, experimental phenomena and the stress states of concrete panels and steel beams under different loading steps were studied.(2) The finite element software ABAQUS is adopted to develop the three-dimension model of composite joints. The accuracy of analysis results are validated by comparing with experimental results. After this, the effects of parameters, such as reinforcement ratio, moment level, rebar strength, height of the slab, etc, on the capacity of the joint under the state of bending moment combined with tensional force are investigated.(3) Based on the experimental and analytical results, a design formula on connection load-carrying capacity under the state of hogging moment combined with tensional force are derived by“Force Balance Method”. The accuracy of the formula is validated by comparing with the analysis results.

Related Dissertations

  1. Analysis of Steel Frame with a Key Column Destroyed,TU391
  2. Analyze on Negative Moment Area of Steel-concrete Composite Beam Force Behavior,TU398.9
  3. Reliability-based Investigation on Design of Flexural Concrete Beams Reinforced with GFRP Rods,TU377
  4. Research on Mechanical Performance of Multibarrel Tube-Confined Concrete Columns under Axial Compressive Loads and Lateral Loads,TU398.9
  5. Static Experiment and Theoretical Research of Endplate Semi-rigid Connection to Concrete Filled Steel Tubular (CFST) Columns with Blind Bolts,TU398.9
  6. The Finite Element Analysis and Experiment Research of the Semi-Rigid Steel-Braced Frame,TU391
  7. Load-Carrying Capacity Analysis of the Parabolic Arch Supported by Cable Under Certain Condition,TU399
  8. Research of Structure Nonlinear Dynamic Performance of Steel Frame-Concrete Tube Residential Building,TU973.17
  9. Research of the Stability and Ultimate Load Carrying Capacity of Steel Truss Arch Bridge,U448.22
  10. Finite Element Nonlinear Analysis on Distortional Buckling of High Strength Cold-Formed Steel Columns,TU392.1
  11. Analysis on the Design and Influence of the Fire Engine Load in Residential District,TU312.1
  12. Strength and Buckling Analyses of Ship Girders with Cutout,U661.4
  13. Study on Microstructures and Properties of Aluminum-steel Explosion Cladding Joint,TG407
  14. Prediction of dynamic test method for bearing capacity of reinforced concrete beams,TU375.1
  15. Study on the Capacity and Application of Aluminum Assembled Mobile House,TU391
  16. The Regulation of Function and Structure by Different Dynamic Tensile and Compressive Stress in Cultured Human Periodontal Ligament Fibroblasts in Vitro,R78
  17. Effective Length Factor of Semi-rigid Connected Steel Frames,TU391
  18. Design Method Research and Experimental Research on Tall Bulidings with Concrete-Filled Steel Tubular Structure,TU973.14
  19. Research on Mechanical Behavior of Reduced Beam Section of Bone Shape Moment Connections to Deep Columns under Cyclic Loads,TU973.2
  20. Research on the Elastic-Plastic Behaviors and Seismic Behaviors of Plane Steel Frames with Semi-Rigid Connections,TU391

CLC: > Industrial Technology > Building Science > Building structure > Composite structure > Other composite structures
© 2012 www.DissertationTopic.Net  Mobile