Dissertation > Excellent graduate degree dissertation topics show

The Intelligent Reactive Power Compensation Based on MCS-51

Author: NingShouChen
Tutor: WangHong
School: Northeastern University
Course: Mechanical Engineering
Keywords: Reactive power Single chip Microcomputer AT89S52
CLC: TP368.12
Type: Master's thesis
Year: 2009
Downloads: 175
Quote: 0
Read: Download Dissertation

Abstract


The reactive power compensation is an important project in the power system. This project designs reactive power automatic controller which casts or cuts off parallel capacitors in order to achieve reactive power compensation, ensuring qualified power factor.The principle of the design is that we judge by both power factor and voltage to cast or cut capacitors. When voltage is in the quality limit, we raise power factor and degrade electric power loss. When voltage is beyond assigned voltage, we cut of capacitors that are working.In hard ware design, AT89S52 is used in the controller, which carries out the function such as sampling and calculating, regulating the reactive power automatically, giving an alarm and protection in case of faults, data saving etc. The cast-cut equipment uses compound switch which composed of contactor and thyristor. A zero triggered circuit is used to restrict the inrush current.The control apparatus can display the condition of voltage, current, power factor and capacitors operation, and have the function of warning and bottoming. Moreover users can set some parameters such as power factor upper limit, lower limit and so on. In this system, we use RS-485 bus standard realizing serial data communications of PC and single-chip computer. The PC can monitor the condition of power factor, voltage and so on.

Related Dissertations

  1. Research of Three-Phase Four-Wire Active Power Filter Based on Dual DSP,TN713.8
  2. Research and Design on Low Voltage Reactive Power Compensation Device,TM761.1
  3. Design and Implementation of AT89S52 temperature measurement and control system,TP273.5
  4. Research on the Monitoring Device for the Main Components of Combine Harvester,S225.3
  5. The Research and Development of Low-Voltage Static VAR Generator Based on TMS320F2812,TM761.1
  6. Design of the Telephone System with Calling Information Processing,TP274
  7. Excavator loading overload alarm system design,TU621
  8. Design and Research on Active Power Filter Device for Hybrid Reactive Power Compensation,TN713.8
  9. Solar tower heliostat Tingri accuracy of online measurement technology research .,TM615
  10. The Error Analysis and Solutions of the Instantaneous Verification Current,TM561
  11. Exploitation of Intelligent Slave Based on PROFIBUS-DPV1,TP273
  12. The Design of Buffer Tank Liquid Level Balancing Controller,TE938
  13. Design of Graphic Reactive Power Optimization Software and Research on Algorithms of Reactive Power Optimization,TM714
  14. Researches on Reactive Power Optimization and Voltage Control in Ningbo Grid,TM714.3
  15. Design of Static Var Compensator’s Digital Control System Based on dsPIC,TM761.1
  16. Research on Electric Network Comeprehensive Line Loss Calculation and Loss Reduction Design Support System,TM73
  17. Water-Bunker Level Monitoring System Underground Coal Mine,TP274.4
  18. Development of Visual Software for Reactive Power Optimization of the Large Consumers’ High Voltage Distribution Network,TM769
  19. Reactive Power Optimization Based on Hierarchical Clustering and Ant Colony Optimization Algorithm,TM714.3
  20. Development of Low-voltage Reactive Power Compensation Controller of Smelting Electric Furnace,TF806.7
  21. Compensation Calculation and Construction Practice of Reative Power Optimization in Country Power Grid,TM744

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Micro-computer > A variety of micro-computer > Microprocessor
© 2012 www.DissertationTopic.Net  Mobile