Dissertation > Excellent graduate degree dissertation topics show

Reserch of Frequency Selective Surface in Ceramic Material

Author: DaiYuHan
Tutor: YangChuanRen
School: University of Electronic Science and Technology
Course: Electronic Science and Technology
Keywords: Frequency Selective surface(FSS) fused silica ceramics doped
CLC: TN820.81
Type: Master's thesis
Year: 2013
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


The radome is one of the key components in aircraft, not only to ensure the normalwork of the radar system, protect it from being affected by the harsh environment, butalso is the important factor to the performance of stealth of aircraft, so the radometechnology is important to design and manufacture of aircraft. This project has tworesearch topics: On the one hand, the effect of frequency selective surface（FSS） inradome to stealthy of aircraft is researched, the research method of FSS is summarized,three kinds of FSS model work in10GHz is designed. On the other hand, the fusedsilica ceramics with low dielectric constant is researched, include the theory of phasetransformation of quartz crystal and manufacture method. Finally, get the ceramicradome materials with good mechanical properties and dielectric properties by doping.First, the basic theory and analysis methods of FSS are summarized, and the onemedium loaded Y-shaped FSS model is designed. The influences of arm length, armwidth, dielectric thickness, incidence angle, incidence wave polarization of the FSS onfrequency response characteristic are simulated by CST, The results show that the centerresonant frequenciey of FSS is10GHz,and-3dB bandwidth is1.6GHz. It has very goodangle and polarization stability within the±40°range, so the FSS has very good filteringcharacteristics. Then, a kind of Three medium loaded Y-shaped FSS model working in10GHz is designed, it has wider bandwide, flatter passband, and angle and polarizationstability. A kind of unit which has a tortuous inner ring also is proposed, it is stable fordifferent angle and polarization, and could be work in different frequency if it isimproved. Its sample is manufactured, and the test result is same as simulation result.Second, the phase transformation of quartz crystal and the sintering process areresearched. It is found that dielectric constants of quartz ceramics increases with the riseof temperature, The minimum dielectric loss is4.1×10-3at1175℃, but the maximumbending strength is just15.5MPa. Then nano SiO2, Si3N4and Li2O-K2O-Al2O3arerespectively doped. The results show that nano SiO2could reduce the dielectric loss,improve the material sintering density and bending strength. Si3N4would becomeamorphous silicon at high temperature so that it could suppress the crystal phase in the sintering process, but it also increase the dielectric constants and loss. The samplewhich doped Li2O-K2O-Al2O3almost melt into glass state at1300℃, and its bendingstrength reached163.65MPa, has greatly improved. Its dielectric constant is stablebetween5.5to6, and minimum dielectric loss is4.15×10-3, so the doping ofLi2O-K2O-Al2O3is the most potential improvement program.

Related Dissertations

  1. The Preparation and Thermoelectric Properties of Rare Earth Subsituted Ag Composite Ca3Co4O9-Based Oxides,TQ174.1
  2. Studies on Synthesis, Characterization and Properties of Fe-V Co-doped TiO2 Catalyst,O614.411
  3. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  4. Investigation of Fabrication, Characterization and Property of Fuctional Titanium Dioxide Nanoporous Materials,TB383.1
  5. Investigation of Preparation and Properties of Ordered Porous TiO2,TB383.2
  6. Iron-doped SnO \u003csub\u003e 2 \u003c/ sub\u003e ceramics and thin films research,TQ174.6
  7. Preparation of graphene Defects,O613.71
  8. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  9. Substrate microstrip bandpass filter parameters on the transmission characteristics of impact studies,TN713.5
  10. Total doped TiO 2 Visible Preparation, Characterization and Properties,O643.36
  11. Photocatalytic Bactericidal of Er3+-Yb3+-Fe3+ Tri-doped TiO2 under Visible Light,O643.36
  12. Study on the Laser Characteristic of Tm3+-doped Double-cladding Fiber,TN248
  13. Investigation of 2μm Tm3+-Doped Double-Clad Fiber Lasers,TN248
  14. Property Research on NiMnGa Magnetic Functional Materials,TG139.6
  15. Analysis and Research about Optical Fiber Amplifier,TN722
  16. Based on the spectrum of rare earth doped materials under conversion and Its Application,TM914.4
  17. Fabry-Perot resonator printed antennas,TN820
  18. Study on Performance of LiFePO4 Cathode Material Synthesized by Solid-State Reaction,TM912.9
  19. Study on Properties of FeS2 Prepared by Hydrothermal Method,TM912.9
  20. Preparation, Enhancement and Toughening of PBSZT Piezoelectric Ceramics,TM282
  21. Preparation and Photo-catalytic Activity of TiO2 Doped with Iron and Nitrogen Coating on Forming Fly Ash Absorbent,O643.36

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Antenna > General issues > Antenna auxiliary equipment > Radome
© 2012 www.DissertationTopic.Net  Mobile