Dissertation > Excellent graduate degree dissertation topics show

Research and Design of Multi-function Control System of LED Display Based on ARM

Author: LiWeiWei
Tutor: QianJianMin
School: Donghua University
Course: Control Theory and Control Engineering
Keywords: LED Display ARM Processor Serial Control SMS control GPRSCommunication
CLC: TN873.93
Type: Master's thesis
Year: 2013
Downloads: 179
Quote: 0
Read: Download Dissertation

Abstract


The LED display is the late eighties in the rapid global development of a new type of display media. Traditional LED display information input is only through the data cable from the computer directly connected to, usually using RS232as a data transfer standard, the maximum baud rate is generally not more than115200bps its inherent low-speed characteristics restrictions LED display content quickly updated simultaneously. For traditional LED display can not meet the need for real-time telematics; using SMS text message control will have to display fonts and word limit; using GPRS wireless network communications can be a good solution to remote information dissemination and large-scale group network problems, but their high cost, poor stability.In this paper, the problems of large-screen LED display system, taking into account the advantages and disadvantages of the different control modes, combined with today’s advanced microcontroller products, control and communication technology, launched by TI’s Stellaris family of Cortex-M3core, new generation32-bit embedded RISC microprocessor composed of a pre-driver circuit, the innovative integration of markets used three different control modes:UART serial control mode, the SMS SMS control mode and GPRS wireless control mode with a control card. Stable display and with the traditional comparison based on8/16of the LED display of the ordinary single-chip system, the system is not a significant increase in system cost, can support a larger viewable area of the content updated in real time control, can be stored more more than the contents of the display, and the control mode is more flexible to meet different customer control demand.Thesis completed the following works:(1) Design of display system hardwareCortex-M3core microcontroller LM3S1138, the external expansion FLASH memory chip EN25F32, display the content through the serial port SMS SMS and GPRS network in three ways to be sent from the host computer to the LED display controller, and then the text is displayed in the dot matrix The effect of the screen, as well as through the host computer on the dot matrix display brightness, display control.(2) The preparation of this thesis PC software and lower machine software, lower computer software by the main program and the special effects program is composed of two parts, the main program to complete initialization is also responsible for the display, serial port using interrupt and host communications. PC software using C+to write the content displayed on the the lower machine’s display settings.The results of this research in the debug LED display system can achieve the desired function, and has been initially applied in the joint venture products, and verify the effectiveness and practicality of the method to achieve the desired objectives.

Related Dissertations

  1. Research on Gas Monitoring System Based on ARM and Multi-sensor Fuzzy Data Fusion,TP277
  2. ARM9-based Monitoring System for Aquaculture,TP368.1
  3. Design of Weather Message Receiving and LED Display System,TN93
  4. The Design and Implementation of LED Broadcasting System Based on Wireless Network,TP311.52
  5. The LED Lattice Screen System Based on Wireless Transmission,TN873
  6. Based on CAN Bus Embedded Data Acquisition System,TP274.2
  7. Web and SMS integration Embedded Remote Monitoring System,TP277
  8. Design on ARM-based Embedded Engineering Machinery Monitor System,TP277
  9. Design of Wireless LED Display System Based on ARM,TN873
  10. The Research of High_Level Data Link Control Protocols Based on ARM,TN919.2
  11. Design of Embedded Numerical Control System Based on ARM and R8C,TP273.5
  12. The Line-protectional Research Based DSP and ARM,TM774
  13. The Study of Single-phase Bridge Votage Inverter Based on ARM and PEBB,TM464
  14. Design and Implimentation of Software for Embedded Terminal Device of Online Testing System,TP311.52
  15. Gait Rectifition System Based on FPGA Drived Floor Screen,TH771
  16. A High Consistency 16-Channel CMOS LED Driver IC,TN312.8
  17. Research on ARM-based Wireless Data Acquisition System of Hydraulic Equipment,TP274.2
  18. The Research and Development of Monochrome LCD Driver in the Embedded Linux,TN873.93
  19. The Research and Design of Embedded Security Systems Based on ARM Processor,TP273.5
  20. Design and Realization of Large-scale LED Display-screen System,TN873
  21. Embedded Web Server and Application of Construction,TP393.05

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Terminal equipment > Display device,the display > LCD monitors
© 2012 www.DissertationTopic.Net  Mobile