Dissertation > Excellent graduate degree dissertation topics show

Based on the IPv6Address Automatic of Wireless Sensor Network

Author: LiZhenHai
Tutor: FengXiuFang
School: Taiyuan University of Technology
Course: Software Engineering
Keywords: wireless sensor network IPv6 automatic configuration MANETconf simulation
CLC: TN929.5
Type: Master's thesis
Year: 2012
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


Wireless sensor network, the future will go into all aspects of life, if each node in the wireless sensor networks can be connected to the Internet, so that the user or host will directly from the nodes in the wireless sensor network data acquisition. the wireless sensor nodes can be carried by a user or host directly manipulated, for wireless sensor network application will be more extensive, but the IPv4address now is depleted, it cannot meet the requirements of wireless sensor nodes at the same time many, the maturity of IPv6technology, together with the address number, suitable for use in wireless sensor networks, but now most of the IPv6address configuration method is mainly used in mobile ad hoc networks, the wireless sensor network, study is few in the wireless sensor network, in order to make any node can connect to the Internet, this thesis designs a protocol WSNACP (Wireless Sensor Network Automatic Configur-ation Protocol), the protocol in the wireless sensor network can be completed on the IP node address configuration. The WSNACP protocol consists of4states, respectively, is a new node> agent node、 common node and failure node, the different condition, different tasks and responsibilities, new nodes that does not have a legitimate IP addresses to nodes. there are generally two kinds of situations, one is just to join a network node, a network. Node duplicate address, then request assigns addresses to nodes. The new node in the network to apply for IP address, at the same time the new node has a detection network address the role of conflict; the agent node is the main distribut-ion node address, and management address allocation table, and forwards the data function; common node is transmitting data, assist the agent node to complete the new node address configuration, as well as to repeat address detection task; failure node is a node for a variety of reasons from the network is temporarily not to recover the IP address of the node. In this thesis, the detailed design of IPv6address structure, as well as the protocol configuration address needs all kinds of package, for a variety of state of the node data transceiver detail design. Node through mutual cooperation between different state reached automatically assigned IP address, the protocol is robust to fusion duplicate address detection function, at the same time protocol also has the address of the function recovery.Based on the WSNACP to achieve, with the OPNET (Optimization Performance Network Engineer Tool) simulation software on the agreement to carry out the simulation test, and analyzes the protocol performance index. Through the OPNET network simulation, the WSNACP protocol address configuration repetition rate lower than the traditional address allocation protocol, duplicate address detection is also relatively traditional address allocation protocol overhead is lower.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Wireless communications > Mobile Communications
© 2012 www.DissertationTopic.Net  Mobile