Dissertation > Excellent graduate degree dissertation topics show

The Numerical Simulation and Optimization Research of Steel Billet Stack Cooling Process

Author: SunXianJin
Tutor: XieZuo
School: Central South University
Course: Thermal Power Engineering
Keywords: billet cooling numerical simulation orthogonal experiment optimization
CLC: TG307
Type: Master's thesis
Year: 2010
Downloads: 44
Quote: 0
Read: Download Dissertation

Abstract


Steel billet stack cooling is an important process to ensure the quality of heating and rolling before carried into furnace. It’s very significant to analyze billet’s temperature decreasing law for reducing the energy consumption of rolling process. A mathematical stack cooling model was established in rolling process line 1# of Xiangtan Iron and Steel Group which includes the standardκ-εand bossinesq model for convection and the DTRM model for radiation based on the FLUENT software.Numerical calculation and optimization testing by orthogonal experiment show that:1.The surface,internal and average temperature of billet follow the exponential decay law:T=Ta+Ae-Bt during cooling process. Billet’s temperature meet the parabolic distribution law:T(x,t)=-Cx(t)x2+TG(t) and T(y,t)=-Cy(t)y+TG(t) in length and width direction respectively.2.The billet temperature uniformity increased gradually during cooling process through the analysis of the temperature uniformity coefficient:3.Optimum condition is staggered arrangement, spacing 1m, stack height 4m, inlet velocity 0.1 m/s, air temperature 40℃. Compared with normal condition, the output of 3# furnace increased 12.47% and the unit consumption reduced 11.76% under optimum condition which has great application value because of the production-increasing and energy-saving benefit.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Study on Properties of Thermal Shock and Ablation Resistance for Gr/Al-Mg Composites,TB332
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  8. Heat Transfer Performance of the Metallic Honeycomb and Regenerative Cooling Channel,V215.4
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  14. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  15. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  16. Numerical Simulation of Biomass Direct Reburning,TK16
  17. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  18. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  19. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  20. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  21. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > General issues > Heating and heating equipment
© 2012 www.DissertationTopic.Net  Mobile