Dissertation > Excellent graduate degree dissertation topics show

The Synthesis and Application of Decane Diamine from Sebacic Acid

Author: PanYu
Tutor: HuGuoSheng
School: University of North
Course: Polymer Chemistry and Physics
Keywords: sebacic acid ammoniated sebaconitrile hydrogenation decane diamine 1010nylon
CLC: TQ226.31
Type: Master's thesis
Year: 2014
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Decane diamine was an important raw material of synthetic polyamides and polyamide,which was also known as1,10-diamino decane or1,10a decamethylenediamine. Thesynthesis and development of decane diamine was derived from the production needs of1010nylon resin. PA1010resin were widely used in apparel fabrics, surfactants, all kinds of resin,chemical and other industries, and so decane diamine as a versatile chemical intermediates,which was applied in clothing hot melt adhesive especially.This paper mainly studied three reactions processes: firstly, the sebaconitrile wasprepared by amide dehydration from sebacic acid, and then sebaconitrile hydrogenationsynthesis decanediamine, finally, nylon1010were obtained by sebacic acid and decanediamine melt polycondensation reaction. Structure and performance of sebacic acid andsebaconitrile were investigated by Fourier transform infrared (IR), nuclear magneticresonance spectroscopy (1HNMR), differential scanning calorimetry (DSC) and otherdetection means. The main results obtained are as follows:1、The sebaconitrile has been successfully prepared using sebacic and ammonia as rawmaterials under the condition of catalysts. The result showed that the optimal synthesiscondition as follows: the lower temperature region (140-210℃) were favorable for amiditionreaction and the corresponding reaction time is8h, however the dehydration reaction is veryeffective under the higher temperature region (210-265℃) and the corresponding dehydrationtime is5h. ZnO/Al2O3catalysis with mass faction of6%revealed the yield of83%. Thecrude product had been characterized by HNMR and the purity of prepared sebaconitrile was92%via temperament chromatograph, which indicated that the sebaconitrile synthesized inthis paper would have the good value of industrialization.2、The decanediamine had been synthesis using sebaconirile and hydrogen as rawmaterials, ethanol as solvent, potassium hydroxide as co-catalysts and raney nickel as the catalyst. The results showed that the optimal synthesis condition as follows: the range oftemperature at80~85℃, reaction pressure on2.1~2.4MPa, stirring speed at800r/min,0.6to0.8%inhibitors potassium hydroxide (Sebaconitrile mass fraction),20μm Raney nickelcatalyst and15%mass fraction. The best yield of decamethylenediamine92%was displayedunder the optimal conditions.3、The nylon1010was obtained by high temperature melt polycondensation, withpurified decane diamine and sebacic acid as monomers, water as solvent. The intrinsicviscosity test and differential scanning calorimetry were demonstrated the structure andthermal characterization of the product. The result showed that melting temperature was202℃, the crystallization temperature was173℃, PA1010was decomposed at340℃, whichverify the practicality and commercial decamethylenediamine similar.

Related Dissertations

  1. Study on Using Sepiolite As Supported Catalysts in Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol,O643.32
  2. Ni / TiO 2 -SiO 2 Preparation, Characterization and Hydrogenation of Maleic Anhydride,TQ225.2
  3. Study on the Benzene Selective Hydrogenation over Rur Catalyst Supported on the mesoporous Molecular Sieve,TQ426.94
  4. Fabrication of Pt Nano-cluster/Chitosan and Its Derivatives Hybrid Membrane and Its Catalytic Activity for Partial Hydrogenation of Benzene,TQ231.2
  5. Functionalization of Carbon Nanotubes and Their Preliminary Applications as Supporting Materials,TB383.1
  6. Research of the FF-36/FC-32 Catalyst Applied in Hydrocraking Unit,TE624.9
  7. Biomass alcohol solution of heavy oil hydrogenation process,TE624.43
  8. The Reserach of Copper Catalysts for Acetonitrile Synthesis by Ethanol Ammoniation,TQ226.61
  9. Study on Vapor-phase Aldehyde Hydrogenation Catalyst Preparation by High Gravity Precipitation Method,TQ426.94
  10. Study on the Process and Dynamics of Catalytic Hydrogenation of Adiponitrile Preparate Hexanediamine,TQ226.31
  11. Study on the Preparation Technology of 2,3,5,6-Tetraaminopyridine through Catalytic Hydrogenation,TQ253.2
  12. Study on Preparation of Modified Bentonite and Its Supporting Nickle Catalysts for Benzene Hydrogenation,TQ203.2
  13. Studies on the Molecular Design and Modifications of Biodegradable PBS-based Polyesters,TQ323.41
  14. Trimethoprim Synthesis of Fluorine permethrin,TQ453.2
  15. Physicochemical Properties and Refined Processing Technology of Lacquer Wax,TQ351.47
  16. The Study of Preparation of Supported Catalysts in the Supercritical Fluid,O643.36
  17. The Periodically Inspection and Safety Assesses of Hydrogenation Reactor in Service,TE966
  18. Catalytic Hydrogenation Process for Synthesis of Decalin from Crude Naphthalene,TQ241.52
  19. Studies on Resorcinol Selective Hydrogenation to Prepare 1,3-cyclohexanedione,TQ234.21
  20. Study on a Novel Organic Liquid Hydrogen Storage System,TQ116.2
  21. Synthesis of 5,6-diaminobenzimidazolone,TQ25

CLC: > Industrial Technology > Chemical Industry > Basic Organic Chemistry Industry > The production of aliphatic compounds ( acyclic compounds) > Aliphatic nitrogen-containing compounds > Aliphatic amines and their derivatives > Amines
© 2012 www.DissertationTopic.Net  Mobile