Dissertation > Excellent graduate degree dissertation topics show

Preparation and Properties Study of Three Dimension Porous Network Al2O3/ZL102as Aerostatic Bearing

Author: ZhangWei
Tutor: DaiBinZuo
School: Nanchang University of Aeronautics and
Course: Mechanical Manufacturing and Automation
Keywords: Three dimensional continuous Al2O3/ZL102composite materials aerostatic bearing preparation method static property FLUENT simulate
CLC: TB333
Type: Master's thesis
Year: 2013
Downloads: 34
Quote: 0
Read: Download Dissertation

Abstract


Three dimensional continuous ceramic/metal composite was obtained byinfiltration process, in which the liquid metal was poured into three-dimensionalnetwork of the porous ceramics perform body. Just as the porous material which isproduced by powder metallurgy technology, the composite material also has the specialperformance of penetration of gas or liquid, and has a good development prospect. Nowit had been applied abroad, but in domestic there are few relevant researches in thisaspect. In this paper, aimed at studying a new type of low permeability coefficientporous aerostatic bearing material, FLUENT software was used to simulate the staticperformance of this material, providing theoretical and experimental basis for theapplication of three dimensional continuous Al2O3/ZL102composite aerostatic bearing.With α-Al2O3, B4C, alkyd resin varnish and polyurethane foam as raw material,porous alumina ceramic perform bodies of various PPI were first prepared using hangpulp forming technology, then infiltration process was used to prepare threedimensional continuous Al2O3/ZL102composite, the subsequent processingmanufacturing the aerostatic bearings. The porosity, microstructure of the aerostaticbearing of this material were tested and analyzed; the effect of permeability, theparameters of operation condition, and the restrictor structure parameters on the staticperformance of aerostatic bearings of this material were simulated using FLUENTsoftware.The study of preparation process and the performance of the materials showed: atthe infiltration temperature of720℃，the infiltration pressure of0.04MPa，the threedimensional continuous Al2O3/ZL102composite materials prepared using30PPI Al2O3perform has a15.7%porosity、0.4×10-12m2permeability, and a uniformity andisotropic porous distribution. The material has better mechanical properties thanmaterials made of10PPI,20PPI Al2O3perform and ZL102, can meet the requirementsof porous aerostatic bearings, and was expected to be used for porous aerostaticbearings.Simulation results of porous composite material aerostatic bearings usingFLUENT software showed that the simulation value of aerostatic bearings loadcapacity at the pressure of0.6MPa is only9.82%different from experiment value. The result showed that the model has certain credibility.

Related Dissertations

  1. Research on the Key Technologies of Fast Axis Servo System,TH133.36
  2. Analysis on the Static and Dynamic Characteristics of Radial-Thrust Aerostatic Bearing,TH133.36
  3. Reseach on the Performance of Externally Pressurized Gas Bearing with Vacuum Pre-Load,TH133.36
  4. Porous aerostatic thrust bearing key technology research,TH133.36
  5. Study on Gas-Magnetic Bearings Spindle and Digital Control for Precision NC Grinder,TG596
  6. Research on Improving Stiffness and Load Capacity of Externally Pressurized Gas Bearings,TH133.36
  7. Studies on Preparation and Catalytic Performance of High Dispersion Pt Based Catalysts,O643.36
  8. Study of Catalyst and Technology for Hydrogenation of Reformed Raffinate Oil,TE624.43
  9. Research on the Single Orifice Static Gas Bearing Lubrication Mechanism and Bearing Capacity,TH133.3
  10. Research on Aerostatic Bearing-rotor System Based on High Speed Precision Motorized Spindles,TH133.36
  11. Study on Dynamic Model and Static Characteristic of CNC Lathe Spindle System with Static Pressure Gas Bearings,TG519.1
  12. Study of Sulfided NiMo Catalysts and Preparation Process for Diesel Hydrotreating,TE624.93
  13. Finite Element Analysis and Experimental Study on the Stability of Precision Aerostatic Bearing Stage,TH703
  14. The Design and Research of High-Precision Stylus Contact Measuring Instrument of Screw Thread Parameters,TG85
  15. Preparation and Properties of Polymeric Composites Filled with Sn-Pb Alloy,TB332
  16. High-speed full support electric spindle aerostatic bearing characteristics,TG502.3
  17. Finite element analysis and experimental study of static and dynamic properties of high-speed high-power support air spindle,TH133.35
  18. Application of the Dielectric Barrier Discharge (DBD) on the Surface Modification of Textiles,TS195
  19. Finite Element Coupling Analysis and Experimental Study on the Static Characteristic and Thermal Performance of the Aerostatic Motorized Spindle,TH133.2
  20. Simulation Based on FLUENT and Experimental Research of Porous Aerostatic Bearing,TH133.36
  21. Analysis of Dynamic Characteristics of Aerostatic Bearing with Orifice Restrictors and Corresponding Rotor-Bearing System,TH113

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Metal - non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile