Dissertation > Excellent graduate degree dissertation topics show

Fabrication of Palladium Nanowires Using Insulin Fibers as Templates

Author: LiRong
Tutor: ZhouXingFei
School: Ningbo University
Course: Condensed Matter Physics
Keywords: insulin fiber oxide palladium particles metal nanowires
CLC:
Type: Master's thesis
Year: 2013
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


The fabrica of nanowires is an important sign in nanodevice application, butthe cost of preparation is very high, in older to reduce the cost, scientists are lookingfor alternative fibers as templates to preparation conductive nanowire. Now, mostamyloid have been confirmed can be used for the template. In this paper, we chooseinsulin fibers as template to fabricate chains of palladium nanoparticlesThere have three aspects for us to study:Firstly, research how to get fiber templates. In this experiment, in order to getfiber templates we controlled the temperature、concentration, and use AFM、FTIR tocharacte them, found that when in liquid， at the environment of70℃、500ug/mland cultivated25hours, fiber’s high up to3.3nm, its structure from alpha helix intostable beta–fold, the fiber’s toughness also is very good up to3.3G, is an betternanofibers template.Secondly, research how to get metal nanoparticles how to control the size. theprecious metal salts solution can hydrolyzed from insoluble into particles in the water.We through control the palladium solution in different temperatures、concentrationand time. From this study found that at a certain range, the temperature is higer andthe concentration is greater, then the insoluble particles will be more, and the sizewill be biger. By AFM characterizated the palladium chloride, when theconcentration is5mm at10℃and20℃the palladium chloride diameter from3.3nm to17.1nm. Experiments confirmed that we can obtaind oxidated palladiumnanoparticles. And the size can be controlled.Thirdly, research how to fabrica metal nanowies. We use protein fibers in liquidand surface mixturd with metal nanoparticles, found that in the liquid can abtaindgood result, and the sample surface is clean. characterizatid by AFM and gaussfitting found that at10℃and20℃,5mm oxygen metalthe average diameter ofnanowires vaird from7.5to20.1nm. were successfully achieved by heating thesample up to600℃under the hydrogen atmosphere and keeping for2hours before cooling down to room temperature. In addition, the X-ray photoelectronspectroscopy was also used to characterize the chemical composition of the fabricatedpalladium metal nanowires. most oxide palladium have been reducted.This experiment proved that the preparation of metal palladium nanowires useinsulin fibers as a template can be realized.

Related Dissertations

  1. The Structural and Mechanical Propertires of Bimetallic Cluster and Nanowire with Core-Shell Structure,TB383.1
  2. Fabrication of Ni and Co-Pt Nanowires Using AAO Template,TB383.1
  3. Fabrication of Metal Nanowires Using AAO Template,TB383.1
  4. Theoretical Studies of Nano-Materials and Development of Linear Scaling Electronic Structure Methods,TB383.1
  5. Study on Preparing Metal and Metal Alloy Nanowires & Nanotubes Using AAO Template,TB383.1
  6. Studies on Novel Structures and Mechanical Properties of Metal Nanowires and Graphene Nanomaterials,O469
  7. Deformation Behavior and Structure Evolution of Nanotube Filled with Metal Nanowire,TB383
  8. Molecular Dynamics Simulation of Plastic Yield and Deformation Mechanisms of Metal Nanowires under Tension, Compression, Torsion and Combined Loading,TB383.1
  9. Preparing One-dimensional Nanowires on DNA-templated Via an Electrochemical Technique and Its Application in Electro-analytical Chemistry,Q819
  10. The Electronic Transport Behavior of Bi and Pb Nanostructures in the Melting Process,TB383.1
  11. Preparation of ITO Quai-1D Nanostructures by Sol-Gel Method Combined with Porous Anodic Aluminum Oxide Template,TB383.1
  12. Study on the Synthesis Bi3.25La0.75Ti3O12（BLT） Nanotubes and Nano Wires,TB383.1
  13. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  14. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  15. The Preparation and Research of Magnetically Separable TiO2 Photocatalyst Nanofibers,TB383.1
  16. Fire Retardancy Performance of Poly (Ethylene Terephthalate) Containing Melamine Cyanurate,TB383.1
  17. Investigation of Fabrication, Characterization and Property of Fuctional Titanium Dioxide Nanoporous Materials,TB383.1
  18. Investigation of Preparation and Properties of Ordered Porous TiO2,TB383.2
  19. Silica fume wet purified preparation of spherical nano-silica,TB383.1
  20. Study on Separation、 Preconcentration and Analysis of Trace Elements with Carbon Nanometer Materials,TB383.1
  21. Preparation of One-dimensional Nano TiO2 and Study on the Decolorization of Dyeing Wastewater,TB383.1

CLC: >
© 2012 www.DissertationTopic.Net  Mobile