Dissertation > Excellent graduate degree dissertation topics show

Preparation and Property of CdS Film

Author: ZhangZhengJie
Tutor: MaTieCheng
School: Dalian University of Technology
Course: Materials Engineering
Keywords: CIGS CdS Chemical bath deposition Magnetron sputtering
CLC:
Type: Master's thesis
Year: 2012
Downloads: 2
Quote: 0
Read: Download Dissertation

Abstract


Copper indium gallium selenium thin film solar cell(CuIn1-xGaxSe2solar cells, referred to CIGS) is a new kind thin film solar cell developed in the last century. The first CIGS solar cell was produced by pulling method in Bell Labs (CIGS is based on the CIS evolved). From then on CIGS solar cells became the research focus in all over the world and developed quickly. ZnO and CIGS contact directly lead to the conversion efficiency of cell was not high, until1985, R.R.Potter developed the current CIGS the basic structure of solar cells. Adding a layer of CdS film was used as the transition layer between ZnO and CIGS in this kind of cell, so the conversion efficiency of cells improved greatly. Therefore, how to improve the performance of the transition layers is the concern of the majority of scholars. At present, the highest conversion efficiency CIGS colar cell in which the CdS film is the transition layer has reached20.3%,by German solar energy and hydrogen research center to create.CdS was prepared by chemical bath deposition and the magnetron sputtering method in this experiment. Ammonium acetate, cadmium acetate, ammonia and thiourea was used as the main raw materials, and then deposit CdS by the way of spinning on soda-lime glass. Analyzes the influence of the deposition time, deposition temperature, rotating speed and Cd2+concentration on crystalline phase of CdS film, surface morphology, resistance, transmissivity and forbidden band width and so on. In the magnetron sputtering method, we used CdS as the target material and deposited CdS on soda-lime glass. The influence of the sputtering time and sputtering pressure on the crystalline phase structure of CdS film, the crystal cell parameter and the transmissivity, so that we can determine the optimal process parameter.The experimental results show that the change of deposition time, deposition temperature, rotating speed and Cd2+concentration has effect on crystallization degree, transmissivity, surface resistance and the optical band gap value of CdS film by chemical bath deposition. When the deposition time of30min, the deposition temperature of80℃, rotating speed of2r/s, Cd2+concentration of0.001mol/L, the performance of CdS is the best. The change of sputtering time and sputtering pressure will affect the crystallization degree and optical properties of the CdS film by magnetron sputtering. When the sputtering time is20min, working pressure is0.5MPa, the performance of the CdS film is the best.The transmission of the CdS thin film prepared by chemical bath deposition is higer than that prepared by magnetron sputtering, and the transimssion is better when the walvelength below500nm. However, the CdS thin film prepared by chemical bath deposition has lower crystallization.

Related Dissertations

  1. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  2. A Research and Development for Single Chip Micyoco AVR Usage,TP368.12
  3. The Syntheses and Applications of Nanao Cadmium Sulfide Based on the Green Chemical Concept,O614.242
  4. Research on CIGS Thin-Film Solar Cell Made by Magnetron Sputtering,TM914.4
  5. The Study of Hemocompatibility of Fluorinated Diamond-like Carbon Films,R318.08
  6. The Microwave Properties of c-axis Oriented BaFe12O19 Films Sputtered on Pt-buffered Silicon Substrates,TM277
  7. Electrochemiluminescence Immunosensor Based on Nanocomposite Film of Surface Modified and Assembled CdS Nanoparticles,TP212.2
  8. P 2 Reparation and Photocatalytic H2 Evolution Study of NiS/CdS Composite Photocatalyst,TQ116.2
  9. Research on ZnO Film Preparation and Its Property by Radio Frequency Magnetron Sputtering,TN321.5
  10. Regenerated cellulose fluorocarbon film on the substrate morphology, structure and properties of,TB383.2
  11. Preparation and Optical Properties of ZAO Thin Film by Reaction RF Magnetron Sputtering,O484.4
  12. Studies on Hard Films of Stainless Steel by Magnetron Sputtering,TG174.44
  13. Colorimetric Determination of CdS Nanocrystals Concentration,TB383.1
  14. Synthesis of Carbon Nanotubes/ Titanium Dioxide Composite Photocatalyst by Fluidized Bed Chemical Vapor Deposition (FBCVD) and Its Photocatalytic Properties,TB383.1
  15. Two-dimensional Tunable Bandgap Photonic Crystals Based on VO2 Phase Transition,O734
  16. Preparation and Properties Research of Ba0.8 Sr0.2 Tio3 /CoFe2O4 Multi-iron Thin Films,O484.1
  17. Growth and Properties of La0.5Sr0.5CoO3/Pb(Zr0.52Ti0.48 O3/La0.5Sr0.5CoO3 Integreted Ferroelectric Thin Films,O484.1
  18. Preparation and Characteristic of BiFeO3 /Bi3.25 La 0.75 Ti3O12 Multiferroic Bi-layer Films,O484.4
  19. Study on the Graphene Preparation on Cu–Ni Alloy Substrate by Chemical Vapor Deposition,O484.1
  20. Preparation and Characterization of Doped Cu3N Thin Films by Magnetron Sputtering,O484.1
  21. The Preparation and Photocatalytic Reduction of CO2 with H2O of CdS/TiO 2 Photocatalyst,X701

CLC: >
© 2012 www.DissertationTopic.Net  Mobile