Dissertation > Excellent graduate degree dissertation topics show

Technology of the Retaining Roadway Along Goaf in Middle Thick Coal Seam

Author: ShenJiaXiao
Tutor: YangShuangSuo
School: Taiyuan University of Technology
Course: Mining Engineering
Keywords: retaining roadway along goaf numerical simulation surroundingrock deformation surrounding rock control roadside packing
CLC: TD325
Type: Master's thesis
Year: 2013
Downloads: 116
Quote: 0
Read: Download Dissertation

Abstract


With coal production increasing, exceed of the gas content has become the main reason of high production and efficiency in the working plane of medium-thickness coal seam. The technology of retaining roadway along goaf is one of the most effective ways to govern high gas in the working plane. Roadway along goaf can also greatly improve the recovery rate of coal resources, to realize reciprocating mining, to reduce the mining roadway drivage rate and the moving time. This technology is superiority, and has remarkable economic benefit. In this paper, through the combination of theoretical analysis, numerical simulation and engineering practice, surrounding rock deformation and activity patterns were studied on the basis of previous analysis. The article proposes technology of surrounding rock control of retaining roadway along goaf in medium-thickness coal seam.The main research works are as follows:(1) Introducing Hou Chaojiong concept of big and small structures into surrounding rock stability study of retaining roadway along goaf in medium-thickness coal seam. Under the action of obturator and Mined-out areas’broken rock, the hard old roof which is above at the test roadway has rebalanced and formed the new structure. We called large structure of surrounding rock of roadway. The hanging action with bolts and anchor cable made the unstable roof anchor together,and this structure called the small structure of surrounding rock.(2) Through the establishment of the key block mechanics model and mechanical analysis,we concluded that:during the period of recovery of the upper and lower working face, the key block of test roadway has large rotation, but not lose its balance.So if they can maintain immediate roof stability, retaining roadway along goaf can be successfully implemented in medium-thickness coal seam.(3) Proposed obturator must both has enough initial support force and has certain contractility.Because sufficient initial support force can ensure the obturator cut off the roof at the edge of Mined-out areas. Cntractile properties can prevent obturator from damaged by upper large structure’s rotary sinking.(4) Roadside packing in medium-thickness coal seam was studied.Using methods of the numerical simulation, we analyzed the vertical displacement and stress characteristics of obturator in different widths.A reasonable width of obturator was confirmed in the end.(5) The research results of analysis and numerical calculation is used in engineering practice. Some observations of strata behavior are carried out.(6) By analyzing and summarizing the law of mining pressure of18207retaining roadway along goaf evaluated the feasibility of the retaining roadway along goaf in middle thick coal seam.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Rock pressure and rock movement > Rock movement
© 2012 www.DissertationTopic.Net  Mobile