Dissertation > Excellent graduate degree dissertation topics show

The Research on the Corrosion Inhibition Performance of TDPA SAMs on the Surface of2024Aluminum Alloy

Author: ChenGeng
Tutor: WangHaiRen
School: Hubei University
Course: Materials Science
Keywords: self-assembled monolayer (SAM) 1-tetradecylphosphonic acids(TDPA) corrosion inhibition 2024aluminum alloy
CLC: TG174.42
Type: Master's thesis
Year: 2013
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


As one of the environmentally friendly techniques, self-assembled monolayers(SAMs) has attracted tremendous attention due to its easy-processing, mild assembling condition and friendly to environment advantages compared with the traditional corrosion inhibition techniques. Meanwhile, SAMs with highly ordered packing structure have high corrosion inhibition performance. In recent years, the corrosion resistance of metal alloys was extensively studied as well as that of pure metal. The corrosion resistance of aluminum alloy, one of the most important metal alloy, has been studied by many researchers. One of the most popular corrosion inhibitor is silane.Based on the report that alkyl phosphinic acid self-assembly film on pure aluminum surface is more stable and corrosive resistant than silane in the corrosive environment. In this work, SAMs of1-tetradecylphosphonic acid (TDPA) prepared on2024aluminum alloy were studied with the adsorption behavior and corrosion inhibition performance.The corrosion inhibition performance was studied by potentiodynamic scanning, Electrochemical Impedance Spectrum (EIS), contact angle measurement, Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM). The corrosion electrolytes are3.5%NaCl and0.1M H2SO4. Both the effects of water and assembling time period on the formation of TDPA SAMs and the inhibition performance were studied. The results of FTIR, XPS and contact angle measurement show that adding water into the assembly solution is beneficial to improve the corrosion inhibition efficiency of SAMs. Furthermore, the higher water content results in greater corrosion inhibition efficiency. Through electrochemical and AFM measurements, it was found that the optimized assembly time to reach the greatest efficiency is2-4hrs. increasing water content may aggravate the dissolution effect of oxide film which is caused by ionization of TDPA molecules. At the same time, increasing water content is beneficial to the hydration of AA2024and it enhanced the adsorption of TDPA molecules. The local corrosion is more susceptible to the dissolution of oxide film than uniform corrosion, So the effect of water on the corrosion inhibition efficiency is different for different corrosion electrolyte. In NaCl corrosion electrolyte, the corrosion inhibition performance of SAMs prepared in solution with20%water is better than that with40%water. However, in H2SO4corrosion electrolyte, the corrosion inhibition performance of SAMs prepared in solution with40%water is better than that with20%water.

Related Dissertations

  1. Scale Clean and Inhibition of Heat Exchanger in Sulfate Titanium Dioxide Process,TQ621.12
  2. Synthesis and Properties Study of Quaternary Ammonium Salts of Fatty Ester,TQ423.12
  3. Formulation Synergism of Amino Acid Compounds as Copper Corrosion Inhibitors,TG174.42
  4. Rearch on the Scale and Corrosion Inhibitor of Naphthenic Imidazoline Betaine,TG174.42
  5. The benzotriazole derivatives lnhibitors and applied research,TG174.42
  6. Study on the Synthsis Naphthenate Imidazoline Borates and Corrosion Inhibition Performance,TG174.42
  7. Corrosion Inhibitor and Antirust Mechanism of the Second-Generation Phosphate Antirust Pigments,TG174.42
  8. Studies on Corrosion Inhibition for Zinc in Nitric Acid Solution,TG174.42
  9. Synthesis and Application of Aqueous Corrosion Inhibitors,TG174.42
  10. Study of Self-assembled Monolayers on the Surface of Copper and Q235 Steel,TG174.4
  11. Preparation of Corrosion Inhibitor for Aluminium in Sodium Hydroxide Solution,TG174.42
  12. Study on Corrosion Mechanism of Q235 Steel and Stainless Steel in Natural Seawater,TG172.5
  13. Study on the Pyrazolone and Azole Corrosion Inhibition for Copper in NaHCO3 Medium,TG174.42
  14. DG - type copper corrosion inhibitor properties and mechanisms of,TG174.42
  15. Sodium polyacrylate scale inhibitor , corrosion inhibition mechanism of,O634
  16. Synthesize and Study of a Novel Vapor Phase Inhibitor,TG174.42
  17. Study on Corrosion Inhibition Effect of Polyaspartic Acid to Carbon Steel in H2SO4 Solution,TG174.1
  18. Research on Surface Effect and Size Effect of Stiction in Mems,TH703
  19. The Investigation on Corrosion Inhibition Effect and Mechanism of Polyaspartic Acid to Copper in HCl Solution,TG174.42
  20. Study of Environment-friendly Corrosion Inhibitor for Drill Tool in Saltwater Drilling Fluids,TG174.42
  21. The Synthesis of N-heterocyclic Organic Inhibitors and Study on Their Inhibitory Effects,TG174.42

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology > Metal preservatives,corrosion inhibitors
© 2012 www.DissertationTopic.Net  Mobile