Dissertation > Excellent graduate degree dissertation topics show

Three-Dimensionally Ordered Sub-Micron Structure Thin Films Fabrication and Their Optical Properties

Author: WangFei
Tutor: ChenJianFeng
School: Beijing University of Chemical Technology
Course: Chemical Engineering and Technology
Keywords: two-step template method photonic crystal colloidal crystal macroporous material three-dimemsionally ordered structure film material
CLC: TB383.2
Type: Master's thesis
Year: 2010
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


Three-dimensionally ordered sub-micron structure thin film, thickness of which was in micron range, consisted of sub-micron units which were assem-bled into long distance like crystal structure. Due to the interactions between light and their periodic structure, these films can be used as photonic crystals to shield light and reinforce reflex. Because of that, recently, many researches were focused on their preparations and properties in nano-micron electronics, thermal electronics, biosensors and so on.This project aimed at discovery of 3D full photonic band gap materials through colloidal crystal template oriented method using a variety of infiltrated technologies. So, for the purpose of the project, some films’optical properties needed to be investigated.During the preparation procedure, firstly, as template bases of colloidal crystal, polystyrene and sub-micron polymethyl methacrylate spheres were synthesized by emulsifier-free polymerization. Results showed that polystyrene spheres had diameter of 380nm, while PMMA 250nm. And both of these partilces’deviations were less than 5%. Secondly,380 nm PS spheres were assembled into colloidal crystal film on FTO conductive slide by vertical deposition technology. The optimized experimental conditions were ethanol as dispersed phase,0.5% w.t. alcoholic solution and 30℃for growth temperature. Under those conditions, the prepared colloidal crystal films could be low ratio of defects, ordered structure and relatively high affinity for the slide, with thickness of 4μm. In spectrum tests, these films exhibited their photonic band gaps in 400~450 nm.In the next step, colloidal crystal templates were transformed into macroporous materials, including silica, alumina, nickel, silver and PANI, by sol-gel, electrodepostion and chemical synthesis methods. For the macroporous silica film, the reforce reflex and transmission attenuation ranges were around 450nm.After that, two-step template was used to fabricate sub-micron silver spheres array by electrodepositing silver in macroporous silica film. The silver particles obtained were monodispersed and arranged into ordered structure.

Related Dissertations

  1. Investigation of Preparation and Properties of Ordered Porous TiO2,TB383.2
  2. Two-dimensional Tunable Bandgap Photonic Crystals Based on VO2 Phase Transition,O734
  3. Research on the High Birefringence Photonic Crystal Fiber Loop Mirror Comb Filter,TN713
  4. Research on the Spectral Characteristics and Sensing Applications of Photonic Crystal Fiber Grating,TP212
  5. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  6. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  7. The Research on Characteristics of Two-wavelength Terahertz Modulator Based on Compound Lattice Photonic Crystals,TN761
  8. The Research on Characteristics of Reconfigurable Optical Add/Drop Multiplexer Based on Photonic Crystals,TN929.1
  9. Studies on Manufacture of Photonic Crystal Fiber Combiners,TN253
  10. The Investigation of Photonic Crystal One-Atom Laser by Quantum Theory,O431.2
  11. Research on the Polarization Error and Key Component of Optical Fiber Gyroscope,TN253
  12. Preparation and Characterization of Three-Dimensionally Ordered Macroporous Cu2O Films,TB383.2
  13. Numerical simulation of the long-pulse laser damage mechanism of one-dimensional photonic crystal film,TN244
  14. Research on the Confinement Loss and Dispersion in W-type Photonic Crystal Fibers,TN253
  15. Investigation on Optical Characteristics of the Microstructure System Based on Optical Resonance,TN929.1
  16. Er-doped infrared light-emitting material properties,O482.31
  17. Photonic Crystal Optical Communication Components Simulation and Holographic Theory Research,TN252
  18. Research on Sensing Properties of Photonic Crystal Fiber Grating,TN253
  19. The Study on Birefringence Photonic Crystal Fiber Pressure Sensor,TN253
  20. Study of the Characteristics of Photonic Crystals Resonant Cavity Using Fdtd Method,TN25
  21. Large-Ratio Stretcher for Ultra-Short Pulses Using Photonic Crystal Fiber,TN253

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile