Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation and Experimental Research for Hardness Field of Cylinder Head Casting of Gray Cast Iron

Author: ZhouZhou
Tutor: ZhouJianXin
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: gray cast iron cylinder head hardness field experimental research numerical simulation
CLC: TG251
Type: Master's thesis
Year: 2012
Downloads: 5
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of computer technology, casting CAE technology hasbeen widely applied in practical production, such as numerical simulation in castingsolidification process, casting mold-filling process, stress field and casting micro-structure.On this basis, to numerically stimulate and predict the mechanical performance of thecasting has always been one of the most important and difficult aspects for the research ofthe scholars at home and abroad, as well as one of the hot spots for casting CAEtechnology. As the casting of engine family, cylinder casting is the most representativecasting product. There are great practical values and research meanings to conductexperiment and simulation research on hardness performance.The current paper takes the grey casting iron as the research subject, which isproduced by NO.1Foundry of Dongfeng Commercial Vehicle Company. Taking thehardness field of casting as the key point, experimental research and numerical simulationare carried out. The experimental research on harness field of cylinder head casting refersto a set of practical plans of casting section and hardness experiment, according to thecharacteristics of cylinder heading casting of grey iron. Based on this experiment design,the whole process of casting production is followed and some teeming parameters of thecasting are obtained, such as teeming temperature, teeming time and teeming liquid ironcomponents. At last, the section and hardness experiment are conducted on two groups offinished cylinder heading castings, and85actually measured hardness data on eachcylinder heading casting are acquired.For the numerical simulation of the hardness field of the casting, based on theteeming parameters acquired from the experiment, InteCAST is applied to make thenumerical simulation on temperature field during solidification process of the casting.Solidification cooling speed of each hardness experimental point is acquired by analyzingand calculating the simulation results. Based on this mathematical model, secondarydevelopment on the software is carried out to finally realize the establishment of3-Dhardness data of the grey iron cylinder heading casting. Because the establishment of thestatistics is based on the actually measured hardness value of the casting, the current research sheds significant lights on the prediction of the hardness performance of thecylinder head of the grey casting iron.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Realization of Coal Liquefaction in the Continum Model System and the Experimental Research of Coal Liquefaction,TQ529.1
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. Outward Bound to the introduction of the experimental study of junior high school students sunshine sports,G633.96
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Iron casting > Gray cast iron castings
© 2012 www.DissertationTopic.Net  Mobile