Dissertation > Excellent graduate degree dissertation topics show

The Expeirmental Study of Improving Processing Strainless Steel Micro-drill Life

Author: JiangZhengJian
Tutor: ZhangWei
School: Dalian University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: micro-drill rake angle chisel edge thining cutting edge honing
CLC: TG713.1
Type: Master's thesis
Year: 2010
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


Micro-drill with planar flank point is prevalent in stainless steel drilling. But heat dissipationand drill tip strengthen become serious, due to high toughness and poor heat conductivity of thismaterial. Novel drill point is developed by experiment study of the characteristics of the drillingbehavior. Tool life tests for drills with different geometry parameters, including relief angle, pointangle, and flute helix angle, are investigated. The results demonstrate that the optimized drill pointis improved in wear resistance.The force and torque are reduced due to thinning of chisel edgelength. The results demonstrate that the optimized drill point with modified rake angle distributionis improved in wear resistance.The tool life is enhanced through reduced chipping by honing thecutting edge. Industrial on-line tests demonstrate the drill life is improved by50%in comparisonwith that of conventional micro drill.

Related Dissertations

  1. Characteristic Analysis of Single CBN Grit Honing Based on Finite Element Method,TG618.2
  2. Study on Tool Tip Wear and Cutting Parameter for Micro-groove Turning,TG51
  3. Clinical Research of Audiology and Surgery Technique in Patients with Otosclerosis,R764
  4. The Study and Improvement of Deformation Aluminium Alloy Component Finish Machining Hole Reamer,TG713.4
  5. Machine Vision Based Precise Detection of PCB Micro-Drill’s Geometry Parameters,TN41
  6. Repeating Sharpening of the Twist Drill and Computer Simulation,TG713
  7. Shengli exploration area Futai oilfield PDC drilling bit adaptive research,TE21
  8. FEA of Metal Cutting Process Based on Ti(C, N)-based Cermets Cutter,TG711
  9. The Design of Small Diameter and Extend Length Hard Alloy Relief Grinding Hobs and Regrinding,TG71
  10. High-speed Milling orthogonal cutting model based on finite element simulation,TG54
  11. Research on the Breakage Mechanism of Micro-drills and Drilling Forces Online Monitoring,TG52
  12. Research on Automatic Sharpening System for PCB Micro Drill Bit,TG596
  13. Tool Structures Design for Milling Titanium Thin-walled Parts,TG711
  14. Study on the Predision Cuttinh Ability of Istropic Purolytic Graphite,V250.2
  15. Research on the Machine Vision and Intelligent Algorithm for Precision Manufacturing and Measurement,TP391.41
  16. Determination of Cone Grinding Parameters and Measuring of Geometric Angle on Twist Drill,TG713.1
  17. Cryogenic and QPQ combined treatment on high-speed steel drill bit cutting life of W6Mo5Cr4V2,TG713.1
  18. Design-Manufacturing and Performance Studies of Diamond Drill,TG713.1
  19. FEM Simulation of the Drill with Indexable Inserts Based on DEFORM,TG713.1
  20. On Design and Research of Single-degree-of-freedom High-frequency Damping Boring Bar,TG713.3
  21. The Study and Improvement of Deformation Aluminium Alloy Component Finish Machining Hole Reamer,TG713.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Cutting tools, abrasives,abrasive tools,fixtures,molds and hand tools > Tool > Hole Cutter > Drill
© 2012 www.DissertationTopic.Net  Mobile