Dissertation > Excellent graduate degree dissertation topics show

Simulation and Research on Surface Evaporator Based on MWorks Plateform

Author: LuoSiZuo
Tutor: HeGuoGeng
School: Huazhong University of Science and Technology
Course: Refrigeration and Cryogenic Engineering
Keywords: Surface evaporator MWorks Simulation Algorithm and program design Optimization
CLC: TB657
Type: Master's thesis
Year: 2013
Downloads: 2
Quote: 0
Read: Download Dissertation


MWorks is a modeling software based on Modelica language which has been appliedin many fields such as electronic, electric, mechanical and so on, except in refrigeration.On the other hand, evaporator is an important part of researches as a significant equipmentof air conditioner. Up to now, simulation for the evaporator by using computers is maintrend to provide evidences and suggestions for its design and optimize. Therefore, it isworthy for establishing the simulation model on MWorks platform and researching itdeeply. This paper mainly focused on the theory of the model, algorithm and programdesign, software development and evaporator performance.Tube-fin heat exchanger commonly seen in practical application has been modeled.The operation principle of tube-fin evaporator was investigated first, and then thedistributed parameter model of evaporator was established through determining therelative parameters and algorithm followed conservation equation after knowing thetheory of two-phase flow and basis of heat and mass transfer well. Finally, the simulationprogram was developed by interface programming method of MWorks.A steady running state for an object model was simulated by the program of thispaper. After, the parameters of each part of evaporator were obtained which showed theperformance of the evaporator. The results of our model were reasonable by comparingwith the experiment results. It was also found that the algorithm is reliable, programdesign is strict and the computational accuracy satisfies the requests of engineeringapplication. It was worth noting that the performance of evaporator is intuitively showedto people by combining the structural parameters and property changes of workingmedium to structure three-dimension figure in MWorks.On the basis of simulation model, the effects of parameter changes(such as thicknessand spacing of fins, dryness, rate of flow for refrigerant and so on) on evaporator performance were researched for another simple diffset by modifying the structureparameters and flow path. At the end, suggestions for evaporator design and optimizingwere provided.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  9. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  10. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  11. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  12. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  13. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  14. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  15. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  16. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  17. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  18. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  19. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  20. Numerical Simulation of Biomass Direct Reburning,TK16
  21. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11

CLC: > Industrial Technology > General industrial technology > Refrigeration Engineering > Refrigeration machinery and equipment > Refrigeration Equipment
© 2012 www.DissertationTopic.Net  Mobile