Dissertation > Excellent graduate degree dissertation topics show

Fabrication and Supercapacitive Properties of Micro-Nano Structures Based on C-MEMS

Author: LiuDan
Tutor: TangZiRong
School: Huazhong University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: C-MEMS Supercapacitor Suspended structures Wrinkle surface SiO2nanowire Manganese oxide Micro-nano integration
CLC: TM53
Type: Master's thesis
Year: 2013
Downloads: 7
Quote: 0
Read: Download Dissertation

Abstract


Carbon microstructures can be fabricated using photoresist as precursor bycombining photolighography process and pyrolysis at high temperature on conventionalcarbon microelectromechanical systems （C-MEMS）. This glass carbon have excellentelectronic and heat conductivity, better biocompatible properties and chemical inertia.MEMS has hold great research interests, and could have been applied in many fields suchas biology, medicine and energy. Hence, the micro power for micro systems has been ingreat demanding. As an important energy devices, supercapacitor can have both highpower density and high energy density. The supercapacitors with carbon as the electrodehave been a great research interest. Based on all above, C-MEMS could be applied todevelop new methods of fabricating micro-nano structures, and further to investigate thesupercapacitive properties. On this study, SU-8was chosed as the precursor on theC-MEMS process. The contents of this thesis are as follows:Fabrication of suspended C-MEMS has been achieved with the diffraction effect, andparameters have been optimized for controllable fabrication. With the supercapacitive teston suspended C-MEMS, the specific capacitance could be increased to3.8times. Withgraphite deposition on the SU-8structures before pyrolysis, C-MEMS with wrinklesurfaces have been achieved. The specific capacitance could be increased to7.5times.With a Cu thin layer deposited on the SU-8structures, C-MEMS/SiO2micro-nanostructures have been realized, and a carbonization-assisted copper-catalyzed mechanismhas been proposed. Moreover, more process details have been investigated to fabricateC-MEMS/SiO2with diverse morphologies. Typical C-MEMS/SiO2has been applied onthe supercapacitive test, and the specific capacitance could be increased to about13times.Manganese dioxide （MnO2） has been integrated to C-MEMS through electrochemicaldeposition method. By controlling deposition time, C-MEMS/MnO2could be synthesizedwith different morphologies. Exellent supercapacitive properties have been shown on theC-MEMS/MnO2, while the specific capacitance could be increased to as high as30times.

Related Dissertations

  1. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  2. Study of Micro Electron Mechanical System Performance Based on Temperature Field of Casimir Potential Energy,TH703
  3. Prepration of Manganses Dioxide and Investigation on the Performance of Supercapacitor,TM53
  4. Silicon pressure sensor design of analog-digital conversion circuit,TP212.1
  5. Study on Electhode Materials of High Surface Area Activated Carbon with Different Pore Structures for Supercapacitor,TM53
  6. The Design and Manufacturing of Micro-plasma Source in Micro Mass Spectrometer for Gas Samples,O539
  7. Preparation and Application of Phenolic Resin-based Spherical Activated Carbon,TQ424.1
  8. Low driving voltage RF MEMS Capacitive Switch Design and Analysis,TM564
  9. Research on Wafer Lever MEMS Vacuum Measurement Device,TB77
  10. Design and Fabrication of Micro Fabry-Perot Tunable Filter,TN713
  11. Research on Key Technology of MEMS Wafer Level Vacuum Packaging Based on TSV,TP211.4
  12. Refinement-oriented Geometrical Modeling and Manufacturability Analysis for Surface Micromachined MEMS,TP211.4
  13. Research on Wavelength Selective Switch Based on MEMS Technology,TN256
  14. Research on Digital 3C Seismic Exploration Technology & the Use in Hai’laer Oil Field,P631.4
  15. Study on Signal Readout Technique for MEMS Gyroscope Based on Optical Interference Phase Detection,O436.1
  16. Silicon microphone preamplifier design study,TN722.71
  17. Slightly inclined cantilever vibration and shock loads in Reliability Analysis,TP211.4
  18. The Research and Design of MEMS-Based Earthquake Detector,P631.43
  19. Preparation of Honeycomb Porous Nanofibrous Carbon Membranes by Electrospinning and Their Applications for Supercapacitors,TQ340.6
  20. Preparation of Novel Activated Carbons and Their Electrochemical Performance,TQ424.1
  21. Study on the Magnetism of Phase Separation and Magnetocaloric Effect of Rare-earth Manganites,O482.5

CLC: > Industrial Technology > Electrotechnical > Electrical > Capacitor
© 2012 www.DissertationTopic.Net  Mobile