Dissertation > Excellent graduate degree dissertation topics show

Hydraulic Model Selection and Model Experimental Study on Pump Sets of Wujiang Pumping Station

Author: ZhenFeng
Tutor: LuWeiGang
School: Yangzhou University
Course: Hydraulic Structure Engineering
Keywords: axial flow pump impeller replacement model test energe characteristics numerical simulation
CLC: TV675
Type: Master's thesis
Year: 2013
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


A new modification scheme is established and an excellent hydraulic model is selected in accordance with the practical situation of reconstruction project in the main pump of the Wujiang pumping station. This paper studys the new hydraulic performance and operating program after modification by device testing. Besides, the paper carrys out numerical simulation on oninlet and outlet conduit by CFD simulation computation.Wujiang pumping station uses six sets of2.8CJ-70-axial pump, the impeller diameter is2.8m,the rotate speed is150r/min,the pump lift is5.62m,the flow rate is designed as21.0m3/s,the pump matches TDC-325/360-40synchronous electrical machine, with capacity1600Kw. Through the comparison and selection between models, TJ04-02model has better characteristics,but it has large flow rate which requires large negative angle. Therefore, in accordance with the practical situation of reconstruction project in the main pump of the Wujiang pumping station, WJ-12model is further-developed on the basis of TJ04-02model.Finally, the pump device embraces WJ-12model equipped with2.8CJ70entrance bucket and original inlet and outlet conduit, and the hydraulic performance tests are carried out on the high accurancy universal testing stand of Yangzhou University.5blade angles are tested on the WJ-12model pump:0°、-2°、-4°、-6°、-8°,the Working Condition Point is that the highest lift reaches the highest net lift, the lowest lift reaches the lowest net lift. The dynamic characteristics of pump model are accquired through experiments at different angles,and comprehensive energy performances curves of models and prototypes can be drew according to the test characteristic results. Besides, different cavitation performance results and critical changes of NPSH curves are accquired by testing NPSH at different blade angles.Meanwhile, this paper adopts methods of numerical calculation of three-dimensional turbulent flow to conduct simulation and analysis of the flow in inlet and outlet conduit of Wujiang pumping station, to select feature section, to scale a hodograph contour map, to calculate the hydraulic characteristics of inlet and outlet flow indicator, to get a more comprehensive access to pump performance.Through the combination of model test study and numerical computation, this article provides an important basis and guarantee for the revamping project of impeller of Wujiang pumping station. At the same time, this article provides a good reference for future renovation of large-sized pumping station construction.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Hydraulic Engineering > Water control,hydraulic structures > Water, water diversion project > Pumping station
© 2012 www.DissertationTopic.Net  Mobile