Dissertation > Excellent graduate degree dissertation topics show

The Study on Piezoelectric Properties of BaTiO3based Lead-free Piezoelectric Ceramics

Author: GaoYun
Tutor: WuYuGong
School: Tianjin University
Course: Microelectronics and Solid State Electronics
Keywords: lead-free piezoelectric ceramics barium titanate Curietemperature piezoelectric properties
CLC: TM282
Type: Master's thesis
Year: 2012
Downloads: 2
Quote: 0
Read: Download Dissertation

Abstract


BaTiO3is one of the most important electronic ceramics material. Bariumtitanate-based ceramics has been widely used in industrial electronic products becauseof its excellent dielectric and piezoelectric properties.Lead zirconate titanate （PZT） has been dominant in the development andapplication of piezoelectric ceramics for a long time. PZT-based ceramics is a seriousenvironmental pollution material. Therefore looking for lead-free piezoelectricmaterials that can replace PZT becomes one of the urgent task in the field ofelectronic materials. As a potential material, barium titanate-based lead-freepiezoelectric ceramic comes back to our attention. The Curie temperature of bariumtitanate is120°C, that limit the application of barium titanate-based ceramics greatly.Improving its performance has become an important issue at present. Dopingmodification is currently the most widely used method to improve its performance.This paper aims to seek a research plan which can promote the Curie temperature ofbarium titanate significantly and keep good piezoelectric properties at the same time.Bi and Cu co-doped BaTiO3ceramics were prepared through solid-state reactionand liquid method respectively. This paper investigated the influence of the amount ofdoping and the sintering temperatures on microstructure, morphology, Curietemperature and piezoelectric properties of （Ba1-2xBi2x）（CuxTi1-x）O3ceramic. Theprocess conditions has been analyzed to prepare （Ba0.99Bi0.01）（Cu0.005Ti0.995）O3powderby sol-gel self-ignition method. The effects of different sintering temperatures on themicrostructure, phase, dielectric and piezoelectric properties of(Ba0.99Bi0.01)(Cu0.005Ti0.995)O3ceramics was investigated. The results demonstrate thatCu and Bi co-doping promotes the Tc from120℃to155℃and reduces sinteringtemperature. Samples sintered at1240℃show the optimum piezoelectric properties,and its piezoelectric constant d33, electromechanical coupling factor Kp, mechanicalquality factor Qm, and piezoelectric constant d31reach80pC/N,12.6%,310and-16.8pC/N, respectively. And the piezoelectric temperature stability has been greatlyimproved.

Related Dissertations

  1. Research of Preparation of BT and NBT Oriented Piezoelectric Ceramics in a Magnetic Field,TM282
  2. Study on Low Temperature Sintered PSN-PZT Piezoelectric Ceramics,TM282
  3. Synthesis of Barium Titanate Nanoparticles by Microwave Reverse Microemulsion,TB383.1
  4. Properties of 1-3 Polymer/Cement Based Piezoelectric Composites,TB332
  5. The Research on PZN-PLZT Piezoelectric Ceramics with High Properties,TM282
  6. Research on Y5P Dielectric Ceramic Materials with High Permittivity and High Stability,TQ174.1
  7. The Study of Piezoelectric Properties on BaTiO3 Based Lead-free Piezoelectric Ceramics,TM282
  8. The Study on Nano-BT/PVDF Composite,TB332
  9. Fabrication and Study on (BT-HA)/PVDF Electroactive Bone-Recovery Biomaterial,TB33
  10. Preparation, Modification and Electric Properties of Na0.5K0.5NbxTa（1-x）O3 Piezoelectric Ceramics,TM282
  11. Study on Preparation and Properties of Potassium Sodium Bismuth-titanate Lead-free Ferroelectirc Thin Films,TM221
  12. Preparation and Properties of (1-x)KNN-xBST Ceramics by Solid State Method,TM282
  13. Fabrication and Properties of 1-3-2 Piezoelectric Composites,TB332
  14. Study on Fabrication and Properties of NKN-LT-LS/Epoxy Resin 1-3 Composite,TB332
  15. Low-temperature sintering wide temperature stability of MLCC dielectric material,TQ174.65
  16. SBN -based ceramics and Properties,TM282
  17. Theoretical Study About Primary Particles of BTO Unit Cell Adsorption on Si(001) Surface,O469
  18. The excess sodium potassium sodium niobate piezoelectric ceramics structure and properties of the research,TM282
  19. Piezoelectric Properties of BaTiO3 Nanofibers and Microwave Absorbing Properties of Leaf-like Fe-Co Alloy Nanoparticles,TB383.1
  20. Preparation,structure and Doping of CaBi4Ti4O15 Ferroelectric Materials,TM221
  21. Doping Effect and Property Modification of Potassium-sodium Niobate Based Lead-free Piezoelectric Ceramics,TM282

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Electric and ceramic materials > Piezoelectric ceramics
© 2012 www.DissertationTopic.Net  Mobile