Dissertation > Excellent graduate degree dissertation topics show

A Design of Sub-threshold Low Power9T-SRAM Bitcell

Author: ChenYuan
Tutor: WuXiuLong
School: Anhui University
Course: Circuits and Systems
Keywords: SRAM Low Power Sub-threshold Design Basic Cell
CLC: TP333
Type: Master's thesis
Year: 2014
Downloads: 3
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of IC industry, the size of a device has decreased to the stage of nanoscale; the power density per unit on the chip also becomes larger and larger, so this makes the power consumption rise from speed, area, cost and many other integrated circuit bottlenecks and become the key factor of the SOC chip design. Memory occupies the chip area of more than ninety percent of the system on a chip (SOC). With its good features, Static random access memory (SRAM) occupies the majority of on-chip memory. In recent years, lowering the system power supply to the near-threshold or sub-threshold area can greatly reduce the power consumption of a chip which is also the central idea of the sub-threshold design. All in all, designing a low power SRAM memory cell which can normally work at the near-threshold or sub-threshold area is of great significance to reduce the power consumption of the SOC.Based on the research status of low power SRAM at home and abroad in recent years, this paper starts with reducing the power consumption of basic cells in SRAM storage array and focuses on resolving the urgent demand for low power consumption of SOC nowadays. After detailed introduction and analysis of several mature basic memory cells including the traditional six-transistor cell in the development process of SRAM, this paper proposes a low power nine-transistor memory cell which works in the sub-threshold region. The power consumption of SRAM can be divided into static and dynamic power consumption; SRAM memory cells which works in the sub-threshold area have a very low power consumption but their stability is also more susceptible to process, supply voltage and temperature (FVT). In the last part, the paper makes a simulation and verification of the nine-transistor memory cell in the aspects of stability, reading and writing speed, power consumption. Compared with the traditional six-transistor memory cell, the design in this paper does have excellent characteristics.

Related Dissertations

  1. Development of Pxibus High Performance Digital I/O Module,TP274
  2. The Experimental Study on Effect of Different Low-power Laser Irradiation on Osseointegration of Dental Implants,R783.6
  3. DVS Technology and Its Application in the Total Station Equipment,TP368.1
  4. Stability of the SRAM Cells for Deep Sub-micron Technologies,TP333
  5. Research on Wireless Low-power Powder Material Moisture Meter,TH83
  6. The Improvement of Nodes’ Low-power Consumption Algorithm for WSN,TP212.9
  7. Study on Mobility Management for IPv6-based Wireless Sensor Networks,TP212.9
  8. Research of Sensors for Pico-Satellite Attitude Determination System,TP212
  9. Heterogeneous data -oriented low-power sensor networks TDMA protocol design and implementation,TP212.9
  10. Embedded SRAM under 65nm process technology research and implementation,TP333
  11. SRAM -based FPGA fault propagation characteristics of single-particle testing method,V467
  12. Experiment Study of Low-level Semiconductor Laser Therapy to Oral Ulcer,R781.5
  13. Design of the Memory System for Digital Signal Processor,TP333
  14. 10-bit 50-MS / s low-power pipelined ADC design,TN792
  15. Tunneling transistor and its application in the memory,TN386
  16. Application of Wireless Sensor Network in Agriculture Greenhouse,TN929.5;TP212.9
  17. Optimization and Hardware Realization for H.264 Intra Prediction Decoder,TN919.81
  18. Research on Longtime Seabed Noise Collection Technology,P733.22
  19. Application and Research of High Frequency Signal Wireless Technology in Equipment On-Line Monitoring Field,TH165.3
  20. Applied to real-time three-dimensional ultrasound echocardiography gain op amp,TP212.9
  21. The design of high - speed low-power embedded SRAM,TP333

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Electronic digital computer (not a continuous role in computer ) > Memory
© 2012 www.DissertationTopic.Net  Mobile