Dissertation > Excellent graduate degree dissertation topics show

Design of Hot Film Anemometer Based on Constant Temperature Difference Method

Author: SunZuo
Tutor: DingXiBo
School: Harbin University of Science and Technology
Course: Instrumentation Engineering
Keywords: The wind speed Hot film Constant temperature difference Platinum resistance
CLC: TP216
Type: Master's thesis
Year: 2013
Downloads: 10
Quote: 0
Read: Download Dissertation

Abstract


Wind speed measurement, as an important element in the industry of Fluidflow measurements, is also the essential parameter and the technical specificationduring industrial processes, scientometrics and energy measurement. What’s more,wind speed measurement plays an important part during products qualityinsurance, production efficiency improvements, as well as resources saving. Inthis article, we are talking about the design of a kind of Hot Film Anemometer,which will be mainly applied on detecting the mine ventilation. During theborehole operation, such as coal mining，a too low wind speed does no good tohuman sweat evaporation and at the same time the gas will be easier toaccumulate. Well, there will be more risks for the production safety and humanhealth if the wind speed is too fast, as mine dusts float more easily. Therefore,mineral anemometer does matter both production safety and miners’ lives.This article discussed the design of a new hot film wind speed measurementsystem, which is powered from a constant temperature difference supplier. Thehot film sensor consists of two platinic electric resistances. One is to be heated,and the other is to be a component of measuring the environment temperature.The whole circuit is designed to be Constant Temperature Difference Controlling.This kind of CTD controlling circuit will supply the heat, which is consumed byairflow, through changing the current magnitude, so that the temperature betweenthe platinic electric resistances stays unchanged. The constant temperaturedifference minimizes the influence on measurement accuracy, and themeasurement range is expanded at the same time. In this design, we usedpolynomial data processing method on the linearization of the sensor signal, inorder to reduce the non-linearity. We also designed to apply the infrared remotecontrol technology on zero and sensitivity calibration. From the above, the wholedesign will make the system more reliable since there are no adjustable components used.In conclusion, the hot film anemometer, which is discussed and designed inthis article, will be with features of smaller size, lower costs and powerconsumption, as well as higher reliability, that provide itself a good marketprospect.

Related Dissertations

  1. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  2. Wind Energy Utilization on the Roof of the High-rise Building,TK89
  3. Impact of Intermittent Power on Grid Voltage Operating Characteristics,TM712
  4. Dynamic Numerical Simulation of Indoor Thermal Comfort,TU831.1
  5. Energy Saving Parameter Research on Tunnel Dryer,TQ051.892
  6. Influence of Solar Wind Speed and Heliospheric Current Sheet on the ICMEs Transit Time,P353
  7. AGgregated Wind Power Prediction for a Region,TM73
  8. Construction phase of large-span suspension bridge aerostatic stability analysis,U441
  9. Sea Surface Wind Speed Inversion Based on CALIPSO Aerosol Production,TN958.98
  10. The Design of Wind Speed and Direction Test System Based on STM32,TH765.4
  11. Based on wavelet analysis measured vibration signal cable-stayed rain non-stationary studies,U441.3
  12. Numerical Simulation and Typhoon Wind Hazard Analysis Based on CE Wind-field Model and Yan Meng Wind-field Model,P444
  13. Typhoon Wind Hazard Analysis of Shenzhen Based on Wind-Field Model Numerical Simulation,P444
  14. Studies on Windy Climatic Change and the Formative Causes of Strong Wind in Northeast China,P425
  15. Study on Characteristics of Wind Field in Ground Layer on Hilly Terrain,P425.3
  16. Research on the Wind Characteristics of the Site of A Steel Truss Arch Bridge in the West Mountainous Area,U442.59
  17. Short-term Wind Power Prediction and Its Impact on Load Forecasting,TM715
  18. Research on Methods of Prediction for Wind Speed Based on Maximum Wind Power Extraction,TM614
  19. Wind Energy Effective Utilization in the Built Environment,TU119
  20. Research of New Energy Technology Development and Micro-Grid Energy Management Algorithm,TM73
  21. Research on Short-term Load Forecasting by Considering Grid-connected Wind Power,TM715

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Automatic testing equipment,instruments
© 2012 www.DissertationTopic.Net  Mobile