Dissertation > Excellent graduate degree dissertation topics show

Study on Inclusions Control of IF Steel for Auto Application

Author: CaoXinQuan
Tutor: ShenMingGang
School: Liaoning University of Science and Technology
Course: Metallurgical Engineering
Keywords: IF steel inclusion ladle slag RH treatment re-pollution
CLC: TF777
Type: Master's thesis
Year: 2012
Downloads: 77
Quote: 0
Read: Download Dissertation

Abstract


IF steel has advanced deep draw behavior and no aging effect,it has became the third generation of stamping steel followed rimming steel and low carbon Al-killed steels. It has super high stamping performance, which is a symbol of a country’s auto plate production level. During steel making process,inclusions control level has the decisive function to auto plate quality.Through the researches of industry test,some laws were found in the process of BOF,RH,CC as to inclusion change. We can draw a conclusion that there are four types of inclusion in IF steel’s slab, which are the cluster inclusions of A12O3 system, block inclusions of A12O3 system, inclusions of A12O3-CaO or A12O3-CaO-SiO2 system, and inclusions of A12O3-Ti2O3 system. Block inclusions of A12O3 system and inclusions of A12O3-CaO-Si O 2 system are the main factors causing the surface defects of IF steel’s slab. So we take some measures to control the inclusions of IF steel for auto application, which are as follows, reducing the slag entrainment in convertor, keeping the [O] activity value at a certain range after de-carbon in RH process, avoiding the temperature increasing during the RH treatment, decreasing the oxidation ability of top slag in the ladle and the re-pollution of steels during the continuous casting, decreasing the amount of cluster inclusions which can deteriorate the surface quality of products seriously, stabilizing the processes,etc..

Related Dissertations

  1. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. A Study on Thermal-Mechanical Damage Behaviour of 60Si2Mn Steel,TG142.15
  4. Study on the Legal System of Compulsory Liability Insurance in Pollution from Ship,D922.294
  5. Our charging system research,X196
  6. LF thermal state slag recycling desulfurization behavior of the process,X757
  7. On the system of public participation in the prevention of environmental pollution in China,X321
  8. Industry technology transfer and to undertake the environmental ethical issues of the,X2
  9. Gejiu tin metal mining areas arsenic contamination geochemical studies,X50
  10. Synthesis and properties of new functionalized graphene oxide drug carriers,TQ460.4
  11. In accepting the edge of survival,C924.2
  12. Information based on the information of the ecological chain of pollution prevention and control,G203
  13. Xinjiang Chaiwopu Lake 2005 - 2009 water quality status and trends,X832
  14. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  15. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  16. Research about Standardized Design of the Integrated Building at the Highway Service Area,TU248
  17. Multi-Overlapping Decentralized Control Approach to Structural Vibration Systems,TP273
  18. Study on the Preparation of Ursolic Acid /β- Cyclodextrin Inclusion Complex by Ultrahigh Pressure,TQ461
  19. Study on the Dry Cutting Performance of Austenitic Stainless Steel 0Cr18Ni9,TG142.71
  20. Based on the combined effect of the rough planning model,O221

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > Ingot > Continuous cast steel,near net shape casting
© 2012 www.DissertationTopic.Net  Mobile