Dissertation > Excellent graduate degree dissertation topics show

Study of Effect of High Temperature Seperator on Hydrodynamices in CFB Boiler Furance

Author: ShiKai
Tutor: LuHuiLin
School: Harbin Institute of Technology
Course: Thermal Power Engineering
Keywords: \fluidized bed cyclone separator two-phase flow
CLC: TK229.66
Type: Master's thesis
Year: 2008
Downloads: 49
Quote: 0
Read: Download Dissertation

Abstract


As one of the most mature combustion technologies, Circulating Fluidized Bed (CFB) technique is facing a main trend of maximization. And it leads to certain problems, and the structural-related ones are of the major. As the scales of CFB device are large, experimental research is difficult to perform. Numerical simulation has become a common method to study the gas-solid two phase flow in CFBs. Different arrangement of the positions of the cyclone separators are considered to study the influence to the flow process. Fluent software is used for simulation.The flow characteristics of gas and particles in a HG-670t/h CFB boiler are simulated. In order to reflect practical situation objectively, the geometry size of the CFB used in simulation is the same as its actual size .The results show that different arrangement of the positions of the cyclone separators have great influences on the distributions of velocity, particle concentration and pressure in the furnace. On the basis of analyzing the different cases, we can know whether they are good or not for the operation of the CFB.The result shows the particle velocity turns down along with the height increases. The maximum of particle concentration appears at the bottom. Second-air causes the higher particle concentration in the middle part.Simulations are carried out on different structure models of CFB to study the influent to the particle-gas flow. Cyclone separators are placed on front and rear wall, side wall and unilateral wall. Parameters such as velocity, concentration and pressure of particles are gained. Gas pressure drops along the height. The Porosity reaches the top point at the exit of the cone. Conclusion is draw that the position of cyclone separator is important to the flow process inside the bed.Results of different structure models of CFB provide the reference opinions to the design and modification engineering in practical industry.

Related Dissertations

  1. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  2. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  3. Study on the Combustion Character of Black Liquor from NSSC in Fluidized Bed,TK16
  4. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  5. Flow Behavior Description of Two-Phase Flow Based on Image Processing Techniques,TP391.41
  6. The Design and Research of the Superheated Steam Saturator,TK17
  7. The System Design and Computational Fluid Dynamics Simulation for Chemical Looping Combustion,O35
  8. A Coupling Model of the Relative Permeability of Porous Media,O357.3
  9. CFD Simulation and Verification Experiment of Fluidized Bed with a Adjustable Slit Height Blast Cap,TQ051
  10. Experiment and Numerical Simulation Study of Side Holds Distributor Fluidized Bed,TQ051
  11. Study on Modeling and Optimal Design of Capacitively Coupled Electrical Resistance Tomography System,TP212
  12. Cleaning phase flow method using complexation - ultrafiltration membrane module of pollution,X703
  13. Circulating fluidized bed boiler combustion modeling and optimization control,TK229.66
  14. Experimental Study on Calcium-based Absorbent Cyclic Carbonation-calcination Reactions for CO2 Separation,X701
  15. Gas-Phase Photocatalytic Oxidation of Volatile Organic Compounds with Fluidized-Bed Optical Fibers Reactor,X701
  16. The Research on Soft Sensor Modeling and Intelligence Controlling in Sewage Disposal Based on Biological Fluidized Bed,X703
  17. Study on the Internal Effect on Inhibiting Gas and Solids Back-Mixing in Fluidized Bed,TQ051.13
  18. The Simulation of Low Concentration of Gas-Solid in the Centrifugal Fan,TH442
  19. Pump seal and the working environment and to improve the method of,TH136
  20. Drip emitter flow field dissipation studies with gas-liquid flow pattern,S277.95

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Various types of boilers > Coal-fired boilers > Flow furnace ( fluidized bed combustion boiler ) the boiler
© 2012 www.DissertationTopic.Net  Mobile