Dissertation > Excellent graduate degree dissertation topics show

Study on Drive and Control System of Five-Phase PMSM Based on FPGA

Author: LiuChunLong
Tutor: YangGuiJie
School: Harbin Institute of Technology
Course: Motor and electrical
Keywords: FPGA Five-Phase PMSM SVPWM SPWM
CLC: TM341
Type: Master's thesis
Year: 2008
Downloads: 197
Quote: 1
Read: Download Dissertation


On the background of the research for the Multi-phase Permanent Magnet Synchronous Motor (PMSM) system, this study researchs the FPGA based drive and control system of five-phase PMSM. Though the three-phase drive system will be used for a very long time due to the economical of regularization and standardization of manufacture, its traditional dominate status has been challenged in many applications. In the case of low voltage high power and high availability drive applications, Multi-phase motors have showed more advantages over traditional three-phase motors, such as motors used for water circulation in nuclear power station, drive system of hybrid vehicles, air navigation and space faring, ship electrical propulsion. Therefore, the study of multi-phase motors has been concentrated by more and more people.Firstly, the MMF time-space harmonics distribution of symmetrical multiphase windings is analyzed, the qualification for creating rotary MMF in multiphase windings is indicated; math modeling of five-phase PMSM with sinusoidal windings and third harmonic inserted windings are then developed, the Generalized Park Transformation is derived and its physics meaning is clearly indicated, then Park Equation is built in rotary frame. All of above lay the theoretical foundation for studying the method of multiphase motors control.Secondly, two different vector control methods are proposed for two different structure five-phase PMSM control systems based on the former analysis of MMF harmonics and math models, a developed control method is proposed for the sinusoidal windings five-phase PMSM, and a method of inserting third harmonic current to enhance torque density of multiphase motor control system is proposed for the third harmonic inserted windings five-phase PMSM, the amplitude and phase qualification is given out. These two control methods are compared and simulated in Simulink.Thirdly, the PWM schemes for two different structures are investigated. The space vector pulse width modulation is adopted in sinusoidal windings five-phase PMSM vector control system, the traditional SVPWM algorithm is analyzed and its disadvantage of low DC voltage utilization is pointed out, then a optimal SVPWM algorithm is proposed; then this SVPWM algorithm’s applicability to third harmonic inserted windings five-phase PMSM control system is discussed and is proved unsuitable for this application, finally, a SPWM scheme is adopted.At last, a third harmonic inserted windings five-phase PMSM is designed, hardware platform of its control system is constructed, software code based on FPGA is written, and the vector control method proposed in this study is validated. The experimental results indicate that with third harmonic current and third harmonic rotor magnetic field inserted, the torque density of five-phase motor is improved, the motor drive system can get high power output ability in low voltage application cases.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Development of LXI Arbitrary Waveform Generator,TM935
  3. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  4. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  5. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  6. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  7. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  8. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  9. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  10. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  11. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  12. Development of Serial Bus Analyzer Based on Nios,TP274
  13. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  14. Development of Pxibus High Performance Digital I/O Module,TP274
  15. Development of LXI Counter,TP274
  16. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  17. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
  18. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  19. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  20. Remote FPGA system design and implementation of security upgrades,TP309

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Synchronous motor
© 2012 www.DissertationTopic.Net  Mobile